diff mbox series

[1/1] usb: cdns3: add NXP imx8qm glue layer

Message ID 1577426348-31227-1-git-send-email-peter.chen@nxp.com (mailing list archive)
State Superseded
Headers show
Series [1/1] usb: cdns3: add NXP imx8qm glue layer | expand

Commit Message

Peter Chen Dec. 27, 2019, 5:59 a.m. UTC 
There is a Cadence USB3 core for imx8qm and imx8qxp SoCs, the cdns
core is the child for this glue layer device.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
 drivers/usb/cdns3/Kconfig     |  10 ++
 drivers/usb/cdns3/Makefile    |   1 +
 drivers/usb/cdns3/cdns3-imx.c | 220 ++++++++++++++++++++++++++++++++++
 3 files changed, 231 insertions(+)
 create mode 100644 drivers/usb/cdns3/cdns3-imx.c

Comments

Felipe Balbi Jan. 2, 2020, 11:26 a.m. UTC | #1 
Peter Chen <peter.chen@nxp.com> writes:

> There is a Cadence USB3 core for imx8qm and imx8qxp SoCs, the cdns
> core is the child for this glue layer device.
>
> Signed-off-by: Peter Chen <peter.chen@nxp.com>
> ---
>  drivers/usb/cdns3/Kconfig     |  10 ++
>  drivers/usb/cdns3/Makefile    |   1 +
>  drivers/usb/cdns3/cdns3-imx.c | 220 ++++++++++++++++++++++++++++++++++
>  3 files changed, 231 insertions(+)
>  create mode 100644 drivers/usb/cdns3/cdns3-imx.c
>
> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
> index 2a1e89d12ed9..b1f526d20f03 100644
> --- a/drivers/usb/cdns3/Kconfig
> +++ b/drivers/usb/cdns3/Kconfig
> @@ -53,4 +53,14 @@ config USB_CDNS3_TI
>  
>  	  e.g. J721e.
>  
> +config USB_CDNS3_IMX
> +	tristate "Cadence USB3 support on NXP i.MX platforms"
> +	depends on ARCH_MXC

I want to be able to compile this in any arch. Please add COMPILE_TEST
and make sure it works
Peter Chen Jan. 3, 2020, 2:31 a.m. UTC | #2 
> > ++++++++++++++++++++++++++++++++++
> >  3 files changed, 231 insertions(+)
> >  create mode 100644 drivers/usb/cdns3/cdns3-imx.c
> >
> > diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
> > index 2a1e89d12ed9..b1f526d20f03 100644
> > --- a/drivers/usb/cdns3/Kconfig
> > +++ b/drivers/usb/cdns3/Kconfig
> > @@ -53,4 +53,14 @@ config USB_CDNS3_TI
> >
> >  	  e.g. J721e.
> >
> > +config USB_CDNS3_IMX
> > +	tristate "Cadence USB3 support on NXP i.MX platforms"
> > +	depends on ARCH_MXC
> 
> I want to be able to compile this in any arch. Please add COMPILE_TEST and
> make sure it works
> 

Hi Felipe,

How to make sure it works? Except for enabling CONFIG_COMPLIE_TEST, what else
I need to do? Thanks.

Peter
Baolin Wang Jan. 3, 2020, 2:41 a.m. UTC | #3 
Hi Peter,

On Fri, Jan 3, 2020 at 10:33 AM Peter Chen <peter.chen@nxp.com> wrote:
>
>
> > > ++++++++++++++++++++++++++++++++++
> > >  3 files changed, 231 insertions(+)
> > >  create mode 100644 drivers/usb/cdns3/cdns3-imx.c
> > >
> > > diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
> > > index 2a1e89d12ed9..b1f526d20f03 100644
> > > --- a/drivers/usb/cdns3/Kconfig
> > > +++ b/drivers/usb/cdns3/Kconfig
> > > @@ -53,4 +53,14 @@ config USB_CDNS3_TI
> > >
> > >       e.g. J721e.
> > >
> > > +config USB_CDNS3_IMX
> > > +   tristate "Cadence USB3 support on NXP i.MX platforms"
> > > +   depends on ARCH_MXC
> >
> > I want to be able to compile this in any arch. Please add COMPILE_TEST and
> > make sure it works
> >
>
> Hi Felipe,
>
> How to make sure it works? Except for enabling CONFIG_COMPLIE_TEST, what else
> I need to do? Thanks.

Felipe's suggestion is you should change your config dependency as:
depends on ARCH_MXC || COMPILE_TEST

Then user can compile your driver to find warning or something else
though the ARCH_MXC config is not enabled.
Peter Chen Jan. 3, 2020, 3:20 a.m. UTC | #4 
> > Hi Felipe,
> >
> > How to make sure it works? Except for enabling CONFIG_COMPLIE_TEST,
> > what else I need to do? Thanks.
> 
> Felipe's suggestion is you should change your config dependency as:
> depends on ARCH_MXC || COMPILE_TEST
> 
> Then user can compile your driver to find warning or something else though the
> ARCH_MXC config is not enabled.

Hi Baolin,

I know that, I have already changed that,  unset ARCH_MXC and enable
CONFIG_COMPILE_TEST. What else I could do to make sure it could compile OK
at every architecture?

Peter
Baolin Wang Jan. 3, 2020, 3:35 a.m. UTC | #5 
Hi Peter,

On Fri, Jan 3, 2020 at 11:20 AM Peter Chen <peter.chen@nxp.com> wrote:
>
>
> > > Hi Felipe,
> > >
> > > How to make sure it works? Except for enabling CONFIG_COMPLIE_TEST,
> > > what else I need to do? Thanks.
> >
> > Felipe's suggestion is you should change your config dependency as:
> > depends on ARCH_MXC || COMPILE_TEST
> >
> > Then user can compile your driver to find warning or something else though the
> > ARCH_MXC config is not enabled.
>
> Hi Baolin,
>
> I know that, I have already changed that,  unset ARCH_MXC and enable
> CONFIG_COMPILE_TEST.

OK. I think this is enough if you can compile successfully.

> What else I could do to make sure it could compile OK
> at every architecture?

I think Felipe's meaning is we should not only compile drivers under
the specific ARCH limitation, we can add COMPILE_TEST dependency to
allow drivers to be complied in any ARCHs. And you've done that, so I
think nothing else need to do here.
Greg KH Jan. 3, 2020, 8:44 a.m. UTC | #6 
On Fri, Jan 03, 2020 at 03:20:17AM +0000, Peter Chen wrote:
>  
> > > Hi Felipe,
> > >
> > > How to make sure it works? Except for enabling CONFIG_COMPLIE_TEST,
> > > what else I need to do? Thanks.
> > 
> > Felipe's suggestion is you should change your config dependency as:
> > depends on ARCH_MXC || COMPILE_TEST
> > 
> > Then user can compile your driver to find warning or something else though the
> > ARCH_MXC config is not enabled.
> 
> Hi Baolin,
> 
> I know that, I have already changed that,  unset ARCH_MXC and enable
> CONFIG_COMPILE_TEST. What else I could do to make sure it could compile OK
> at every architecture?

Add that option and then actually build it for all arches :)

thanks,

greg k-h
Felipe Balbi Jan. 3, 2020, 9:26 a.m. UTC | #7 
Hi,

Peter Chen <peter.chen@nxp.com> writes:
>  
>> > Hi Felipe,
>> >
>> > How to make sure it works? Except for enabling CONFIG_COMPLIE_TEST,
>> > what else I need to do? Thanks.
>> 
>> Felipe's suggestion is you should change your config dependency as:
>> depends on ARCH_MXC || COMPILE_TEST
>> 
>> Then user can compile your driver to find warning or something else though the
>> ARCH_MXC config is not enabled.
>
> Hi Baolin,
>
> I know that, I have already changed that,  unset ARCH_MXC and enable
> CONFIG_COMPILE_TEST. What else I could do to make sure it could compile OK
> at every architecture?

If it works fine on ARM and x86 it's rather unlikely that it will break
anywhere else. In any case, once I apply the patch to my tree, it will
be compiled by 0-day build service in several different architectures.
Roger Quadros Jan. 3, 2020, 1:36 p.m. UTC | #8 
Hi Peter,

On 27/12/2019 07:59, Peter Chen wrote:
> There is a Cadence USB3 core for imx8qm and imx8qxp SoCs, the cdns
> core is the child for this glue layer device.
> 
> Signed-off-by: Peter Chen <peter.chen@nxp.com>
> ---
>   drivers/usb/cdns3/Kconfig     |  10 ++
>   drivers/usb/cdns3/Makefile    |   1 +
>   drivers/usb/cdns3/cdns3-imx.c | 220 ++++++++++++++++++++++++++++++++++
>   3 files changed, 231 insertions(+)
>   create mode 100644 drivers/usb/cdns3/cdns3-imx.c
> 
> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
> index 2a1e89d12ed9..b1f526d20f03 100644
> --- a/drivers/usb/cdns3/Kconfig
> +++ b/drivers/usb/cdns3/Kconfig
> @@ -53,4 +53,14 @@ config USB_CDNS3_TI
>   
>   	  e.g. J721e.
>   
> +config USB_CDNS3_IMX
> +	tristate "Cadence USB3 support on NXP i.MX platforms"
> +	depends on ARCH_MXC
> +	default USB_CDNS3
> +	help
> +	  Say 'Y' or 'M' here if you are building for NXP i.MX
> +	  platforms that contain Cadence USB3 controller core.
> +
> +	  For example, imx8qm and imx8qxp.
> +
>   endif
> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
> index 948e6b88d1a9..d47e341a6f39 100644
> --- a/drivers/usb/cdns3/Makefile
> +++ b/drivers/usb/cdns3/Makefile
> @@ -15,3 +15,4 @@ cdns3-$(CONFIG_USB_CDNS3_HOST)		+= host.o
>   
>   obj-$(CONFIG_USB_CDNS3_PCI_WRAP)	+= cdns3-pci-wrap.o
>   obj-$(CONFIG_USB_CDNS3_TI)		+= cdns3-ti.o
> +obj-$(CONFIG_USB_CDNS3_IMX)		+= cdns3-imx.o
> diff --git a/drivers/usb/cdns3/cdns3-imx.c b/drivers/usb/cdns3/cdns3-imx.c
> new file mode 100644
> index 000000000000..53b47306bcc2
> --- /dev/null
> +++ b/drivers/usb/cdns3/cdns3-imx.c
> @@ -0,0 +1,220 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * cdns3-imx.c - NXP i.MX specific Glue layer for Cadence USB Controller
> + *
> + * Copyright (C) 2019 NXP
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/io.h>
> +#include <linux/of_platform.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/iopoll.h>
> +
> +#define USB3_CORE_CTRL1    0x00
> +#define USB3_CORE_CTRL2    0x04
> +#define USB3_INT_REG       0x08
> +#define USB3_CORE_STATUS   0x0c
> +#define XHCI_DEBUG_LINK_ST 0x10
> +#define XHCI_DEBUG_BUS     0x14
> +#define USB3_SSPHY_CTRL1   0x40
> +#define USB3_SSPHY_CTRL2   0x44
> +#define USB3_SSPHY_STATUS  0x4c
> +#define USB2_PHY_CTRL1     0x50
> +#define USB2_PHY_CTRL2     0x54
> +#define USB2_PHY_STATUS    0x5c
> +
> +/* Register bits definition */
> +
> +/* USB3_CORE_CTRL1 */
> +#define SW_RESET_MASK	(0x3f << 26)
> +#define PWR_SW_RESET	(1 << 31)

You could use BIT() macro here.

> +#define APB_SW_RESET	(1 << 30)
> +#define AXI_SW_RESET	(1 << 29)
> +#define RW_SW_RESET	(1 << 28)
> +#define PHY_SW_RESET	(1 << 27)
> +#define PHYAHB_SW_RESET	(1 << 26)
> +#define ALL_SW_RESET	(PWR_SW_RESET | APB_SW_RESET | AXI_SW_RESET | \
> +		RW_SW_RESET | PHY_SW_RESET | PHYAHB_SW_RESET)
> +#define OC_DISABLE	(1 << 9)
> +#define MDCTRL_CLK_SEL	(1 << 7)
> +#define MODE_STRAP_MASK	(0x7)
> +#define DEV_MODE	(1 << 2)
> +#define HOST_MODE	(1 << 1)
> +#define OTG_MODE	(1 << 0)
> +
> +/* USB3_INT_REG */
> +#define CLK_125_REQ	(1 << 29)
> +#define LPM_CLK_REQ	(1 << 28)
> +#define DEVU3_WAEKUP_EN	(1 << 14)
> +#define OTG_WAKEUP_EN	(1 << 12)
> +#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */
> +#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */
> +
> +/* USB3_CORE_STATUS */
> +#define MDCTRL_CLK_STATUS	(1 << 15)
> +#define DEV_POWER_ON_READY	(1 << 13)
> +#define HOST_POWER_ON_READY	(1 << 12)
> +
> +/* USB3_SSPHY_STATUS */
> +#define CLK_VALID_MASK		(0x3f << 26)
> +#define CLK_VALID_COMPARE_BITS	(0xf << 28)
> +#define PHY_REFCLK_REQ		(1 << 0)
> +
> +struct cdns_imx {
> +	struct device *dev;
> +	void __iomem *noncore;
> +	struct clk_bulk_data *clks;
> +	int num_clks;
> +};
> +
> +static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset)
> +{
> +	return readl(data->noncore + offset);
> +}
> +
> +static inline void cdns_imx_writel(struct cdns_imx *data, u32 offset, u32 value)
> +{
> +	writel(value, data->noncore + offset);
> +}
> +
> +static const struct clk_bulk_data imx_cdns3_core_clks[] = {
> +	{ .id = "usb3_lpm_clk" },
> +	{ .id = "usb3_bus_clk" },
> +	{ .id = "usb3_aclk" },
> +	{ .id = "usb3_ipg_clk" },
> +	{ .id = "usb3_core_pclk" },
> +};
> +
> +static int cdns_imx_noncore_init(struct cdns_imx *data)
> +{
> +	u32 value;
> +	int ret;
> +	struct device *dev = data->dev;
> +
> +	cdns_imx_writel(data, USB3_SSPHY_STATUS, CLK_VALID_MASK);
> +	udelay(1);
> +	ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
> +		(value & CLK_VALID_COMPARE_BITS) == CLK_VALID_COMPARE_BITS,
> +		10, 100000);
> +	if (ret) {
> +		dev_err(dev, "wait clkvld timeout\n");
> +		return ret;
> +	}
> +
> +	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
> +	value |= ALL_SW_RESET;
> +	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
> +	udelay(1);
> +
> +	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
> +	value = (value & ~MODE_STRAP_MASK) | OTG_MODE | OC_DISABLE;
> +	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
> +
> +	value = cdns_imx_readl(data, USB3_INT_REG);
> +	value |= HOST_INT1_EN | DEV_INT_EN;
> +	cdns_imx_writel(data, USB3_INT_REG, value);
> +
> +	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
> +	value &= ~ALL_SW_RESET;
> +	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
> +	return ret;
> +}
> +
> +static int cdns_imx_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *node = dev->of_node;
> +	struct cdns_imx *data;
> +	int ret;
> +
> +	if (!node)
> +		return -ENODEV;
> +
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, data);
> +	data->dev = dev;
> +	data->noncore = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(data->noncore)) {
> +		dev_err(dev, "can't map IOMEM resource\n");
> +		return PTR_ERR(data->noncore);
> +	}
> +
> +	data->num_clks = ARRAY_SIZE(imx_cdns3_core_clks);
> +	data->clks = (struct clk_bulk_data *)imx_cdns3_core_clks;
> +	ret = devm_clk_bulk_get(dev, data->num_clks, data->clks);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
> +	if (ret)
> +		return ret;
> +
> +	ret = cdns_imx_noncore_init(data);
> +	if (ret)
> +		goto err;
> +
> +	ret = of_platform_populate(node, NULL, NULL, dev);
> +	if (ret) {
> +		dev_err(dev, "failed to create children: %d\n", ret);
> +		goto err;
> +	}
> +
> +	return ret;
> +
> +err:
> +	clk_bulk_disable_unprepare(data->num_clks, data->clks);
> +	return ret;
> +}
> +
> +static int cdns_imx_remove_core(struct device *dev, void *data)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +
> +	platform_device_unregister(pdev);
> +
> +	return 0;
> +}
> +
> +static int cdns_imx_remove(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +
> +	device_for_each_child(dev, NULL, cdns_imx_remove_core);
> +	pm_runtime_put_sync(dev);

You didn't do a pm_runtime_get_sync() in probe().
doesn't this complain on module remove?

> +	pm_runtime_disable(dev);
> +

What about disabling the bulk clocks that were enabled in probe?

> +	platform_set_drvdata(pdev, NULL);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id cdns_imx_of_match[] = {
> +	{ .compatible = "fsl,imx8qm-usb3", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, cdns_imx_of_match);
> +
> +static struct platform_driver cdns_imx_driver = {
> +	.probe		= cdns_imx_probe,
> +	.remove		= cdns_imx_remove,
> +	.driver		= {
> +		.name	= "cdns3-imx",
> +		.of_match_table	= cdns_imx_of_match,
> +	},
> +};
> +module_platform_driver(cdns_imx_driver);
> +
> +MODULE_ALIAS("platform:cdns3-imx");
> +MODULE_AUTHOR("Peter Chen <peter.chen@nxp.com>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Cadence USB3 i.MX Glue Layer");
>
Peter Chen Jan. 6, 2020, 2:45 a.m. UTC | #9 
On 20-01-03 15:36:50, Roger Quadros wrote:
> > +/* Register bits definition */
> > +
> > +/* USB3_CORE_CTRL1 */
> > +#define SW_RESET_MASK	(0x3f << 26)
> > +#define PWR_SW_RESET	(1 << 31)
> 
> You could use BIT() macro here.

Ok.

> 
> > +#define APB_SW_RESET	(1 << 30)
> > +#define AXI_SW_RESET	(1 << 29)
> > +#define RW_SW_RESET	(1 << 28)
> > +#define PHY_SW_RESET	(1 << 27)
> > +#define PHYAHB_SW_RESET	(1 << 26)
> > +#define ALL_SW_RESET	(PWR_SW_RESET | APB_SW_RESET | AXI_SW_RESET | \
> > +		RW_SW_RESET | PHY_SW_RESET | PHYAHB_SW_RESET)
> > +#define OC_DISABLE	(1 << 9)
> > +#define MDCTRL_CLK_SEL	(1 << 7)
> > +#define MODE_STRAP_MASK	(0x7)
> > +#define DEV_MODE	(1 << 2)
> > +#define HOST_MODE	(1 << 1)
> > +#define OTG_MODE	(1 << 0)
> > +
> > +/* USB3_INT_REG */
> > +#define CLK_125_REQ	(1 << 29)
> > +#define LPM_CLK_REQ	(1 << 28)
> > +#define DEVU3_WAEKUP_EN	(1 << 14)
> > +#define OTG_WAKEUP_EN	(1 << 12)
> > +#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */
> > +#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */
> > +
> > +/* USB3_CORE_STATUS */
> > +#define MDCTRL_CLK_STATUS	(1 << 15)
> > +#define DEV_POWER_ON_READY	(1 << 13)
> > +#define HOST_POWER_ON_READY	(1 << 12)
> > +
> > +/* USB3_SSPHY_STATUS */
> > +#define CLK_VALID_MASK		(0x3f << 26)
> > +#define CLK_VALID_COMPARE_BITS	(0xf << 28)
> > +#define PHY_REFCLK_REQ		(1 << 0)
> > +
> > +struct cdns_imx {
> > +	struct device *dev;
> > +	void __iomem *noncore;
> > +	struct clk_bulk_data *clks;
> > +	int num_clks;
> > +};
> > +
> > +static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset)
> > +{
> > +	return readl(data->noncore + offset);
> > +}
> > +
> > +static inline void cdns_imx_writel(struct cdns_imx *data, u32 offset, u32 value)
> > +{
> > +	writel(value, data->noncore + offset);
> > +}
> > +
> > +static const struct clk_bulk_data imx_cdns3_core_clks[] = {
> > +	{ .id = "usb3_lpm_clk" },
> > +	{ .id = "usb3_bus_clk" },
> > +	{ .id = "usb3_aclk" },
> > +	{ .id = "usb3_ipg_clk" },
> > +	{ .id = "usb3_core_pclk" },
> > +};
> > +
> > +static int cdns_imx_noncore_init(struct cdns_imx *data)
> > +{
> > +	u32 value;
> > +	int ret;
> > +	struct device *dev = data->dev;
> > +
> > +	cdns_imx_writel(data, USB3_SSPHY_STATUS, CLK_VALID_MASK);
> > +	udelay(1);
> > +	ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
> > +		(value & CLK_VALID_COMPARE_BITS) == CLK_VALID_COMPARE_BITS,
> > +		10, 100000);
> > +	if (ret) {
> > +		dev_err(dev, "wait clkvld timeout\n");
> > +		return ret;
> > +	}
> > +
> > +	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
> > +	value |= ALL_SW_RESET;
> > +	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
> > +	udelay(1);
> > +
> > +	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
> > +	value = (value & ~MODE_STRAP_MASK) | OTG_MODE | OC_DISABLE;
> > +	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
> > +
> > +	value = cdns_imx_readl(data, USB3_INT_REG);
> > +	value |= HOST_INT1_EN | DEV_INT_EN;
> > +	cdns_imx_writel(data, USB3_INT_REG, value);
> > +
> > +	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
> > +	value &= ~ALL_SW_RESET;
> > +	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
> > +	return ret;
> > +}
> > +
> > +static int cdns_imx_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct device_node *node = dev->of_node;
> > +	struct cdns_imx *data;
> > +	int ret;
> > +
> > +	if (!node)
> > +		return -ENODEV;
> > +
> > +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> > +	if (!data)
> > +		return -ENOMEM;
> > +
> > +	platform_set_drvdata(pdev, data);
> > +	data->dev = dev;
> > +	data->noncore = devm_platform_ioremap_resource(pdev, 0);
> > +	if (IS_ERR(data->noncore)) {
> > +		dev_err(dev, "can't map IOMEM resource\n");
> > +		return PTR_ERR(data->noncore);
> > +	}
> > +
> > +	data->num_clks = ARRAY_SIZE(imx_cdns3_core_clks);
> > +	data->clks = (struct clk_bulk_data *)imx_cdns3_core_clks;
> > +	ret = devm_clk_bulk_get(dev, data->num_clks, data->clks);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = cdns_imx_noncore_init(data);
> > +	if (ret)
> > +		goto err;
> > +
> > +	ret = of_platform_populate(node, NULL, NULL, dev);
> > +	if (ret) {
> > +		dev_err(dev, "failed to create children: %d\n", ret);
> > +		goto err;
> > +	}
> > +
> > +	return ret;
> > +
> > +err:
> > +	clk_bulk_disable_unprepare(data->num_clks, data->clks);
> > +	return ret;
> > +}
> > +
> > +static int cdns_imx_remove_core(struct device *dev, void *data)
> > +{
> > +	struct platform_device *pdev = to_platform_device(dev);
> > +
> > +	platform_device_unregister(pdev);
> > +
> > +	return 0;
> > +}
> > +
> > +static int cdns_imx_remove(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +
> > +	device_for_each_child(dev, NULL, cdns_imx_remove_core);
> > +	pm_runtime_put_sync(dev);
> 
> You didn't do a pm_runtime_get_sync() in probe().
> doesn't this complain on module remove?
> 
> > +	pm_runtime_disable(dev);
> > +
> 
> What about disabling the bulk clocks that were enabled in probe?

I will remove all runtime pm operations since it is not supported
well for current submitted version, and add clock disable operation
at .remove.

Thanks for reviewing, Roger.

Peter
> 
> > +	platform_set_drvdata(pdev, NULL);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id cdns_imx_of_match[] = {
> > +	{ .compatible = "fsl,imx8qm-usb3", },
> > +	{},
> > +};
> > +MODULE_DEVICE_TABLE(of, cdns_imx_of_match);
> > +
> > +static struct platform_driver cdns_imx_driver = {
> > +	.probe		= cdns_imx_probe,
> > +	.remove		= cdns_imx_remove,
> > +	.driver		= {
> > +		.name	= "cdns3-imx",
> > +		.of_match_table	= cdns_imx_of_match,
> > +	},
> > +};
> > +module_platform_driver(cdns_imx_driver);
> > +
> > +MODULE_ALIAS("platform:cdns3-imx");
> > +MODULE_AUTHOR("Peter Chen <peter.chen@nxp.com>");
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_DESCRIPTION("Cadence USB3 i.MX Glue Layer");
> > 
> 
> -- 
> cheers,
> -roger
> 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
diff mbox series

Patch

diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
index 2a1e89d12ed9..b1f526d20f03 100644
--- a/drivers/usb/cdns3/Kconfig
+++ b/drivers/usb/cdns3/Kconfig
@@ -53,4 +53,14 @@  config USB_CDNS3_TI
 
 	  e.g. J721e.
 
+config USB_CDNS3_IMX
+	tristate "Cadence USB3 support on NXP i.MX platforms"
+	depends on ARCH_MXC
+	default USB_CDNS3
+	help
+	  Say 'Y' or 'M' here if you are building for NXP i.MX
+	  platforms that contain Cadence USB3 controller core.
+
+	  For example, imx8qm and imx8qxp.
+
 endif
diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
index 948e6b88d1a9..d47e341a6f39 100644
--- a/drivers/usb/cdns3/Makefile
+++ b/drivers/usb/cdns3/Makefile
@@ -15,3 +15,4 @@  cdns3-$(CONFIG_USB_CDNS3_HOST)		+= host.o
 
 obj-$(CONFIG_USB_CDNS3_PCI_WRAP)	+= cdns3-pci-wrap.o
 obj-$(CONFIG_USB_CDNS3_TI)		+= cdns3-ti.o
+obj-$(CONFIG_USB_CDNS3_IMX)		+= cdns3-imx.o
diff --git a/drivers/usb/cdns3/cdns3-imx.c b/drivers/usb/cdns3/cdns3-imx.c
new file mode 100644
index 000000000000..53b47306bcc2
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-imx.c
@@ -0,0 +1,220 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * cdns3-imx.c - NXP i.MX specific Glue layer for Cadence USB Controller
+ *
+ * Copyright (C) 2019 NXP
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/iopoll.h>
+
+#define USB3_CORE_CTRL1    0x00
+#define USB3_CORE_CTRL2    0x04
+#define USB3_INT_REG       0x08
+#define USB3_CORE_STATUS   0x0c
+#define XHCI_DEBUG_LINK_ST 0x10
+#define XHCI_DEBUG_BUS     0x14
+#define USB3_SSPHY_CTRL1   0x40
+#define USB3_SSPHY_CTRL2   0x44
+#define USB3_SSPHY_STATUS  0x4c
+#define USB2_PHY_CTRL1     0x50
+#define USB2_PHY_CTRL2     0x54
+#define USB2_PHY_STATUS    0x5c
+
+/* Register bits definition */
+
+/* USB3_CORE_CTRL1 */
+#define SW_RESET_MASK	(0x3f << 26)
+#define PWR_SW_RESET	(1 << 31)
+#define APB_SW_RESET	(1 << 30)
+#define AXI_SW_RESET	(1 << 29)
+#define RW_SW_RESET	(1 << 28)
+#define PHY_SW_RESET	(1 << 27)
+#define PHYAHB_SW_RESET	(1 << 26)
+#define ALL_SW_RESET	(PWR_SW_RESET | APB_SW_RESET | AXI_SW_RESET | \
+		RW_SW_RESET | PHY_SW_RESET | PHYAHB_SW_RESET)
+#define OC_DISABLE	(1 << 9)
+#define MDCTRL_CLK_SEL	(1 << 7)
+#define MODE_STRAP_MASK	(0x7)
+#define DEV_MODE	(1 << 2)
+#define HOST_MODE	(1 << 1)
+#define OTG_MODE	(1 << 0)
+
+/* USB3_INT_REG */
+#define CLK_125_REQ	(1 << 29)
+#define LPM_CLK_REQ	(1 << 28)
+#define DEVU3_WAEKUP_EN	(1 << 14)
+#define OTG_WAKEUP_EN	(1 << 12)
+#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */
+#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */
+
+/* USB3_CORE_STATUS */
+#define MDCTRL_CLK_STATUS	(1 << 15)
+#define DEV_POWER_ON_READY	(1 << 13)
+#define HOST_POWER_ON_READY	(1 << 12)
+
+/* USB3_SSPHY_STATUS */
+#define CLK_VALID_MASK		(0x3f << 26)
+#define CLK_VALID_COMPARE_BITS	(0xf << 28)
+#define PHY_REFCLK_REQ		(1 << 0)
+
+struct cdns_imx {
+	struct device *dev;
+	void __iomem *noncore;
+	struct clk_bulk_data *clks;
+	int num_clks;
+};
+
+static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset)
+{
+	return readl(data->noncore + offset);
+}
+
+static inline void cdns_imx_writel(struct cdns_imx *data, u32 offset, u32 value)
+{
+	writel(value, data->noncore + offset);
+}
+
+static const struct clk_bulk_data imx_cdns3_core_clks[] = {
+	{ .id = "usb3_lpm_clk" },
+	{ .id = "usb3_bus_clk" },
+	{ .id = "usb3_aclk" },
+	{ .id = "usb3_ipg_clk" },
+	{ .id = "usb3_core_pclk" },
+};
+
+static int cdns_imx_noncore_init(struct cdns_imx *data)
+{
+	u32 value;
+	int ret;
+	struct device *dev = data->dev;
+
+	cdns_imx_writel(data, USB3_SSPHY_STATUS, CLK_VALID_MASK);
+	udelay(1);
+	ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
+		(value & CLK_VALID_COMPARE_BITS) == CLK_VALID_COMPARE_BITS,
+		10, 100000);
+	if (ret) {
+		dev_err(dev, "wait clkvld timeout\n");
+		return ret;
+	}
+
+	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+	value |= ALL_SW_RESET;
+	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+	udelay(1);
+
+	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+	value = (value & ~MODE_STRAP_MASK) | OTG_MODE | OC_DISABLE;
+	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+
+	value = cdns_imx_readl(data, USB3_INT_REG);
+	value |= HOST_INT1_EN | DEV_INT_EN;
+	cdns_imx_writel(data, USB3_INT_REG, value);
+
+	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+	value &= ~ALL_SW_RESET;
+	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+	return ret;
+}
+
+static int cdns_imx_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct cdns_imx *data;
+	int ret;
+
+	if (!node)
+		return -ENODEV;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, data);
+	data->dev = dev;
+	data->noncore = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->noncore)) {
+		dev_err(dev, "can't map IOMEM resource\n");
+		return PTR_ERR(data->noncore);
+	}
+
+	data->num_clks = ARRAY_SIZE(imx_cdns3_core_clks);
+	data->clks = (struct clk_bulk_data *)imx_cdns3_core_clks;
+	ret = devm_clk_bulk_get(dev, data->num_clks, data->clks);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
+	if (ret)
+		return ret;
+
+	ret = cdns_imx_noncore_init(data);
+	if (ret)
+		goto err;
+
+	ret = of_platform_populate(node, NULL, NULL, dev);
+	if (ret) {
+		dev_err(dev, "failed to create children: %d\n", ret);
+		goto err;
+	}
+
+	return ret;
+
+err:
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+	return ret;
+}
+
+static int cdns_imx_remove_core(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static int cdns_imx_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	device_for_each_child(dev, NULL, cdns_imx_remove_core);
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id cdns_imx_of_match[] = {
+	{ .compatible = "fsl,imx8qm-usb3", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cdns_imx_of_match);
+
+static struct platform_driver cdns_imx_driver = {
+	.probe		= cdns_imx_probe,
+	.remove		= cdns_imx_remove,
+	.driver		= {
+		.name	= "cdns3-imx",
+		.of_match_table	= cdns_imx_of_match,
+	},
+};
+module_platform_driver(cdns_imx_driver);
+
+MODULE_ALIAS("platform:cdns3-imx");
+MODULE_AUTHOR("Peter Chen <peter.chen@nxp.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USB3 i.MX Glue Layer");