@@ -650,5 +650,82 @@
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
};
+
+ usb3_phy0: usb-phy@381f0040 {
+ compatible = "fsl,imx8mp-usb-phy";
+ reg = <0x381f0040 0x40>;
+ clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>;
+ clock-names = "phy";
+ assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb3_0: usb@32f10100 {
+ compatible = "fsl,imx8mp-dwc3";
+ reg = <0x32f10100 0x8>;
+ clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+ <&clk IMX8MP_CLK_HSIO_AXI_DIV>,
+ <&clk IMX8MP_CLK_USB_ROOT>;
+ clock-names = "hsio", "bus", "suspend";
+ assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI_SRC>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+ assigned-clock-rates = <500000000>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ usb_dwc3_0: dwc3@38100000 {
+ compatible = "snps,dwc3";
+ reg = <0x38100000 0x10000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy0>, <&usb3_phy0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,dis-u2-freeclk-exists-quirk;
+ status = "disabled";
+ };
+
+ };
+
+ usb3_phy1: usb-phy@382f0040 {
+ compatible = "fsl,imx8mp-usb-phy";
+ reg = <0x382f0040 0x40>;
+ clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>;
+ clock-names = "phy";
+ assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb3_1: usb@32f10108 {
+ compatible = "fsl,imx8mp-dwc3";
+ reg = <0x32f10108 0x8>;
+ clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+ <&clk IMX8MP_CLK_HSIO_AXI_DIV>,
+ <&clk IMX8MP_CLK_USB_ROOT>;
+ clock-names = "hsio", "bus", "suspend";
+ assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI_SRC>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+ assigned-clock-rates = <500000000>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ usb_dwc3_1: dwc3@38200000 {
+ compatible = "snps,dwc3";
+ reg = <0x38200000 0x10000>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy1>, <&usb3_phy1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,dis-u2-freeclk-exists-quirk;
+ status = "disabled";
+ };
+ };
};
};
imx8mp integrates 2 identical dwc3 based USB3 controllers and Synopsys phys, each instance has additional wakeup logic to support low powe mode, so the glue layer need a node with dwc3 core sub node. Signed-off-by: Li Jun <jun.li@nxp.com> --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 77 +++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+)