| Message ID | 1603831083-2025-2-git-send-email-sanm@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | USB DWC3 host wake up support from system suspend | expand |
Hi, On 2020-10-28 02:07, Sandeep Maheswaram wrote: > Avoiding phy powerdown in host mode so that it can be woken up by > devices. > Added hs_phy_mode flag to check connection status and set phy mode > and configure interrupts. > > Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> > --- > drivers/usb/dwc3/core.c | 14 +++----------- > drivers/usb/dwc3/core.h | 2 ++ > 2 files changed, 5 insertions(+), 11 deletions(-) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index bdf0925..0e4bc1e 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -1672,10 +1672,6 @@ static int dwc3_suspend_common(struct dwc3 > *dwc, pm_message_t msg) > dwc3_core_exit(dwc); > break; > case DWC3_GCTL_PRTCAP_HOST: > - if (!PMSG_IS_AUTO(msg)) { > - dwc3_core_exit(dwc); > - break; > - } This could be a problem for platforms that don't support runtime_suspend and rely on dwc3_core_exit to power-down PHY. IMO you can continue to do dwc3_core_exit() if runtime_pm isn't enabled for the device. > > /* Let controller to suspend HSPHY before PHY driver suspends */ > if (dwc->dis_u2_susphy_quirk || > @@ -1733,13 +1729,9 @@ static int dwc3_resume_common(struct dwc3 *dwc, > pm_message_t msg) > spin_unlock_irqrestore(&dwc->lock, flags); > break; > case DWC3_GCTL_PRTCAP_HOST: > - if (!PMSG_IS_AUTO(msg)) { > - ret = dwc3_core_init_for_resume(dwc); > - if (ret) > - return ret; > - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); > - break; > - } > + > + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); > + > /* Restore GUSB2PHYCFG bits that were modified in suspend */ > reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); > if (dwc->dis_u2_susphy_quirk) > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h > index 74323b1..da63d4a3 100644 > --- a/drivers/usb/dwc3/core.h > +++ b/drivers/usb/dwc3/core.h > @@ -1101,6 +1101,8 @@ struct dwc3 { > > bool phys_ready; > > + unsigned int hs_phy_mode; > + This change should instead be part of the other patch ? "usb: dwc3: host: Add suspend_quirk for dwc3 host" > struct ulpi *ulpi; > bool ulpi_ready;
On Sat, Nov 28, 2020 at 08:01:31AM +0530, mgautam@codeaurora.org wrote: > Hi, > > > On 2020-10-28 02:07, Sandeep Maheswaram wrote: > > Avoiding phy powerdown in host mode so that it can be woken up by > > devices. > > Added hs_phy_mode flag to check connection status and set phy mode > > and configure interrupts. > > > > Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> > > --- > > drivers/usb/dwc3/core.c | 14 +++----------- > > drivers/usb/dwc3/core.h | 2 ++ > > 2 files changed, 5 insertions(+), 11 deletions(-) > > > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > > index bdf0925..0e4bc1e 100644 > > --- a/drivers/usb/dwc3/core.c > > +++ b/drivers/usb/dwc3/core.c > > @@ -1672,10 +1672,6 @@ static int dwc3_suspend_common(struct dwc3 > > *dwc, pm_message_t msg) > > dwc3_core_exit(dwc); > > break; > > case DWC3_GCTL_PRTCAP_HOST: > > - if (!PMSG_IS_AUTO(msg)) { > > - dwc3_core_exit(dwc); > > - break; > > - } > > > This could be a problem for platforms that don't support runtime_suspend > and rely on dwc3_core_exit to power-down PHY. > IMO you can continue to do dwc3_core_exit() if runtime_pm isn't enabled > for the device. This would imply that USB wakeup isn't supported on such platforms, right? Could we have a flag that the dwc3-<glue> driver can set to indicate that wakeup is enabled for this suspend cycle to omit the PHY power-down? > > > > /* Let controller to suspend HSPHY before PHY driver suspends */ > > if (dwc->dis_u2_susphy_quirk || > > @@ -1733,13 +1729,9 @@ static int dwc3_resume_common(struct dwc3 *dwc, > > pm_message_t msg) > > spin_unlock_irqrestore(&dwc->lock, flags); > > break; > > case DWC3_GCTL_PRTCAP_HOST: > > - if (!PMSG_IS_AUTO(msg)) { > > - ret = dwc3_core_init_for_resume(dwc); > > - if (ret) > > - return ret; > > - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); > > - break; > > - } > > + > > + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); > > + > > /* Restore GUSB2PHYCFG bits that were modified in suspend */ > > reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); > > if (dwc->dis_u2_susphy_quirk) > > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h > > index 74323b1..da63d4a3 100644 > > --- a/drivers/usb/dwc3/core.h > > +++ b/drivers/usb/dwc3/core.h > > @@ -1101,6 +1101,8 @@ struct dwc3 { > > > > bool phys_ready; > > > > + unsigned int hs_phy_mode; > > + > > This change should instead be part of the other patch ? > "usb: dwc3: host: Add suspend_quirk for dwc3 host" +1
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index bdf0925..0e4bc1e 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1672,10 +1672,6 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) dwc3_core_exit(dwc); break; case DWC3_GCTL_PRTCAP_HOST: - if (!PMSG_IS_AUTO(msg)) { - dwc3_core_exit(dwc); - break; - } /* Let controller to suspend HSPHY before PHY driver suspends */ if (dwc->dis_u2_susphy_quirk || @@ -1733,13 +1729,9 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) spin_unlock_irqrestore(&dwc->lock, flags); break; case DWC3_GCTL_PRTCAP_HOST: - if (!PMSG_IS_AUTO(msg)) { - ret = dwc3_core_init_for_resume(dwc); - if (ret) - return ret; - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); - break; - } + + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); + /* Restore GUSB2PHYCFG bits that were modified in suspend */ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); if (dwc->dis_u2_susphy_quirk) diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 74323b1..da63d4a3 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1101,6 +1101,8 @@ struct dwc3 { bool phys_ready; + unsigned int hs_phy_mode; + struct ulpi *ulpi; bool ulpi_ready;
Avoiding phy powerdown in host mode so that it can be woken up by devices. Added hs_phy_mode flag to check connection status and set phy mode and configure interrupts. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> --- drivers/usb/dwc3/core.c | 14 +++----------- drivers/usb/dwc3/core.h | 2 ++ 2 files changed, 5 insertions(+), 11 deletions(-)