diff mbox series

[2/8] usb: gadget: f_uac2/u_audio: add feedback endpoint support

Message ID 1614603943-11668-3-git-send-email-ruslan.bilovol@gmail.com (mailing list archive)
State New, archived
Headers show
Series USB Audio Gadget part 2: Feedback endpoint, Volume/Mute support | expand

Commit Message

Ruslan Bilovol March 1, 2021, 1:05 p.m. UTC
As per USB and UAC2 specs, asynchronous audio sink endpoint
requires explicit synchronization mechanism (Isochronous
Feedback Endpoint)

Implement feedback companion endpoint for ISO OUT endpoint

This patch adds all required infrastructure and USB requests
handling for feedback endpoint. Syncrhonization itself is
still dummy (feedback ep always reports 'nomimal frequency'
 e.g. no adjustement is needed). This satisfies hosts that
require feedback endpoint (like Win10) and poll it periodically

Actual synchronization mechanism should be implemented
separately

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
---
 drivers/usb/gadget/function/f_uac2.c  |  34 +++++++-
 drivers/usb/gadget/function/u_audio.c | 141 +++++++++++++++++++++++++++++++++-
 drivers/usb/gadget/function/u_audio.h |   3 +
 3 files changed, 175 insertions(+), 3 deletions(-)

Comments

Pavel Hofman April 17, 2021, 9:43 a.m. UTC | #1
Dne 01. 03. 21 v 14:05 Ruslan Bilovol napsal(a):
> +static void u_audio_set_fback_frequency(enum usb_device_speed speed,
> +					unsigned int freq, void *buf)
> +{
> +	u32 ff = 0;
> +
> +	if (speed == USB_SPEED_FULL) {
> +		/*
> +		 * Full-speed feedback endpoints report frequency
> +		 * in samples/microframe
> +		 * Format is encoded in Q10.10 left-justified in the 24 bits,
> +		 * so that it has a Q10.14 format.
> +		 */
> +		ff = DIV_ROUND_UP((freq << 14), 1000);
> +	} else {
> +		/*
> +		 * High-speed feedback endpoints report frequency
> +		 * in samples/microframe.
> +		 * Format is encoded in Q12.13 fitted into four bytes so that
> +		 * the binary point is located between the second and the third
> +		 * byte format (that is Q16.16)
> +		 *
> +		 * Prevent integer overflow by calculating in Q12.13 format and
> +		 * then shifting to Q16.16
> +		 */
> +		ff = DIV_ROUND_UP((freq << 13), (8*1000)) << 3;
> +	}

Hi Ruslan,

Thanks a lot for your patch. The HS calculation of Q16.16 feedback value
overflows at some 524kHz, disallowing use of larger samplerates (e.g.
768kHz or higher).

I tested the formula used in alsa USB driver
https://github.com/torvalds/linux/blob/d99676af540c2dc829999928fb81c58c80a1dce4/sound/usb/endpoint.c#L80
which uses only 10bit shift. The feedback control in UAC2 gadget now
works up to 4M samplerate with 1Hz precision (tested on RPi4 with
bInterval = 1, checked in stream0 proc file on linux host).

--- a/drivers/usb/gadget/function/u_audio.c
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -118,7 +119,8 @@ static void u_audio_set_fback_frequency(enum
usb_device_speed speed,
                 * Prevent integer overflow by calculating in Q12.13
format and
                 * then shifting to Q16.16
                 */
-               ff = DIV_ROUND_UP((freq << 13), (8*1000)) << 3;
+               //ff = DIV_ROUND_UP((freq << 13), (8*1000)) << 3;
+               ff = ((freq << 10) + 62) / 125;
        }
        *(__le32 *)buf = cpu_to_le32(ff);
 }


Best regards,

Pavel.
diff mbox series

Patch

diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index f868e38..6f7b7c1 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -240,7 +240,7 @@  enum {
 	.bDescriptorType = USB_DT_INTERFACE,
 
 	.bAlternateSetting = 1,
-	.bNumEndpoints = 1,
+	.bNumEndpoints = 2,
 	.bInterfaceClass = USB_CLASS_AUDIO,
 	.bInterfaceSubClass = USB_SUBCLASS_AUDIOSTREAMING,
 	.bInterfaceProtocol = UAC_VERSION_2,
@@ -299,6 +299,27 @@  enum {
 	.wLockDelay = 0,
 };
 
+/* STD AS ISO IN Feedback Endpoint */
+static struct usb_endpoint_descriptor fs_epin_fback_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bEndpointAddress = USB_DIR_IN,
+	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_USAGE_FEEDBACK,
+	.wMaxPacketSize = cpu_to_le16(3),
+	.bInterval = 1,
+};
+
+static struct usb_endpoint_descriptor hs_epin_fback_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_USAGE_FEEDBACK,
+	.wMaxPacketSize = cpu_to_le16(4),
+	.bInterval = 4,
+};
+
+
 /* Audio Streaming IN Interface - Alt0 */
 static struct usb_interface_descriptor std_as_in_if0_desc = {
 	.bLength = sizeof std_as_in_if0_desc,
@@ -395,6 +416,7 @@  enum {
 	(struct usb_descriptor_header *)&as_out_fmt1_desc,
 	(struct usb_descriptor_header *)&fs_epout_desc,
 	(struct usb_descriptor_header *)&as_iso_out_desc,
+	(struct usb_descriptor_header *)&fs_epin_fback_desc,
 
 	(struct usb_descriptor_header *)&std_as_in_if0_desc,
 	(struct usb_descriptor_header *)&std_as_in_if1_desc,
@@ -425,6 +447,7 @@  enum {
 	(struct usb_descriptor_header *)&as_out_fmt1_desc,
 	(struct usb_descriptor_header *)&hs_epout_desc,
 	(struct usb_descriptor_header *)&as_iso_out_desc,
+	(struct usb_descriptor_header *)&hs_epin_fback_desc,
 
 	(struct usb_descriptor_header *)&std_as_in_if0_desc,
 	(struct usb_descriptor_header *)&std_as_in_if1_desc,
@@ -562,6 +585,7 @@  static void setup_descriptor(struct f_uac2_opts *opts)
 		fs_audio_desc[i++] = USBDHDR(&as_out_fmt1_desc);
 		fs_audio_desc[i++] = USBDHDR(&fs_epout_desc);
 		fs_audio_desc[i++] = USBDHDR(&as_iso_out_desc);
+		fs_audio_desc[i++] = USBDHDR(&fs_epin_fback_desc);
 	}
 	if (EPIN_EN(opts)) {
 		fs_audio_desc[i++] = USBDHDR(&std_as_in_if0_desc);
@@ -595,6 +619,7 @@  static void setup_descriptor(struct f_uac2_opts *opts)
 		hs_audio_desc[i++] = USBDHDR(&as_out_fmt1_desc);
 		hs_audio_desc[i++] = USBDHDR(&hs_epout_desc);
 		hs_audio_desc[i++] = USBDHDR(&as_iso_out_desc);
+		hs_audio_desc[i++] = USBDHDR(&hs_epin_fback_desc);
 	}
 	if (EPIN_EN(opts)) {
 		hs_audio_desc[i++] = USBDHDR(&std_as_in_if0_desc);
@@ -757,6 +782,12 @@  static int afunc_validate_opts(struct g_audio *agdev, struct device *dev)
 			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
 			return -ENODEV;
 		}
+		agdev->in_ep_fback = usb_ep_autoconfig(gadget,
+						       &fs_epin_fback_desc);
+		if (!agdev->in_ep_fback) {
+			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+			return -ENODEV;
+		}
 	}
 
 	if (EPIN_EN(uac2_opts)) {
@@ -775,6 +806,7 @@  static int afunc_validate_opts(struct g_audio *agdev, struct device *dev)
 				le16_to_cpu(hs_epout_desc.wMaxPacketSize));
 
 	hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress;
+	hs_epin_fback_desc.bEndpointAddress = fs_epin_fback_desc.bEndpointAddress;
 	hs_epin_desc.bEndpointAddress = fs_epin_desc.bEndpointAddress;
 
 	setup_descriptor(uac2_opts);
diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
index 5fbceee..8e74b54 100644
--- a/drivers/usb/gadget/function/u_audio.c
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -38,6 +38,12 @@  struct uac_rtd_params {
 	unsigned int max_psize;	/* MaxPacketSize of endpoint */
 
 	struct usb_request **reqs;
+
+	struct usb_request *req_fback; /* Feedback endpoint request */
+	unsigned int ffback; /* Real frequency reported by feedback endpoint */
+	bool fb_ep_enabled; /* if the ep is enabled */
+
+	spinlock_t lock; /* lock for feedback and control transfers */
 };
 
 struct snd_uac_chip {
@@ -70,6 +76,35 @@  struct snd_uac_chip {
 	.periods_min = MIN_PERIODS,
 };
 
+static void u_audio_set_fback_frequency(enum usb_device_speed speed,
+					unsigned int freq, void *buf)
+{
+	u32 ff = 0;
+
+	if (speed == USB_SPEED_FULL) {
+		/*
+		 * Full-speed feedback endpoints report frequency
+		 * in samples/microframe
+		 * Format is encoded in Q10.10 left-justified in the 24 bits,
+		 * so that it has a Q10.14 format.
+		 */
+		ff = DIV_ROUND_UP((freq << 14), 1000);
+	} else {
+		/*
+		 * High-speed feedback endpoints report frequency
+		 * in samples/microframe.
+		 * Format is encoded in Q12.13 fitted into four bytes so that
+		 * the binary point is located between the second and the third
+		 * byte format (that is Q16.16)
+		 *
+		 * Prevent integer overflow by calculating in Q12.13 format and
+		 * then shifting to Q16.16
+		 */
+		ff = DIV_ROUND_UP((freq << 13), (8*1000)) << 3;
+	}
+	*(__le32 *)buf = cpu_to_le32(ff);
+}
+
 static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req)
 {
 	unsigned int pending;
@@ -173,6 +208,42 @@  static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req)
 		dev_err(uac->card->dev, "%d Error!\n", __LINE__);
 }
 
+static void u_audio_iso_fback_complete(struct usb_ep *ep,
+				       struct usb_request *req)
+{
+	struct uac_rtd_params *prm = req->context;
+	struct snd_uac_chip *uac = prm->uac;
+	struct g_audio *audio_dev = uac->audio_dev;
+	int status = req->status;
+	unsigned long flags;
+
+	/* i/f shutting down */
+	if (!prm->ep_enabled) {
+		kfree(req->buf);
+		usb_ep_free_request(ep, req);
+		return;
+	}
+
+	if (req->status == -ESHUTDOWN)
+		return;
+
+	/*
+	 * We can't really do much about bad xfers.
+	 * Afterall, the ISOCH xfers could fail legitimately.
+	 */
+	if (status)
+		pr_debug("%s: iso_complete status(%d) %d/%d\n",
+			__func__, status, req->actual, req->length);
+
+	spin_lock_irqsave(&prm->lock, flags);
+	u_audio_set_fback_frequency(audio_dev->gadget->speed,
+				    prm->ffback, req->buf);
+	spin_unlock_irqrestore(&prm->lock, flags);
+
+	if (usb_ep_queue(ep, req, GFP_ATOMIC))
+		dev_err(uac->card->dev, "%d Error!\n", __LINE__);
+}
+
 static int uac_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 {
 	struct snd_uac_chip *uac = snd_pcm_substream_chip(substream);
@@ -335,14 +406,40 @@  static inline void free_ep(struct uac_rtd_params *prm, struct usb_ep *ep)
 		dev_err(uac->card->dev, "%s:%d Error!\n", __func__, __LINE__);
 }
 
+static inline void free_ep_fback(struct uac_rtd_params *prm, struct usb_ep *ep)
+{
+	struct snd_uac_chip *uac = prm->uac;
+
+	if (!prm->fb_ep_enabled)
+		return;
+
+	prm->fb_ep_enabled = false;
+
+	if (prm->req_fback) {
+		if (usb_ep_dequeue(ep, prm->req_fback)) {
+			kfree(prm->req_fback->buf);
+			usb_ep_free_request(ep, prm->req_fback);
+		}
+		/*
+		 * If usb_ep_dequeue() cannot successfully dequeue the
+		 * request, the request will be freed by the completion
+		 * callback.
+		 */
+
+		prm->req_fback = NULL;
+	}
+
+	if (usb_ep_disable(ep))
+		dev_err(uac->card->dev, "%s:%d Error!\n", __func__, __LINE__);
+}
 
 int u_audio_start_capture(struct g_audio *audio_dev)
 {
 	struct snd_uac_chip *uac = audio_dev->uac;
 	struct usb_gadget *gadget = audio_dev->gadget;
 	struct device *dev = &gadget->dev;
-	struct usb_request *req;
-	struct usb_ep *ep;
+	struct usb_request *req, *req_fback;
+	struct usb_ep *ep, *ep_fback;
 	struct uac_rtd_params *prm;
 	struct uac_params *params = &audio_dev->params;
 	int req_len, i;
@@ -374,6 +471,42 @@  int u_audio_start_capture(struct g_audio *audio_dev)
 			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
 	}
 
+	ep_fback = audio_dev->in_ep_fback;
+	if (!ep_fback)
+		return 0;
+
+	/* Setup feedback endpoint */
+	config_ep_by_speed(gadget, &audio_dev->func, ep_fback);
+	prm->fb_ep_enabled = true;
+	usb_ep_enable(ep_fback);
+	req_len = ep_fback->maxpacket;
+
+	req_fback = usb_ep_alloc_request(ep_fback, GFP_ATOMIC);
+	if (req_fback == NULL)
+		return -ENOMEM;
+
+	prm->req_fback = req_fback;
+	req_fback->zero = 0;
+	req_fback->context = prm;
+	req_fback->length = req_len;
+	req_fback->complete = u_audio_iso_fback_complete;
+
+	req_fback->buf = kzalloc(req_len, GFP_ATOMIC);
+	if (!req_fback->buf)
+		return -ENOMEM;
+
+	/*
+	 * Configure the feedback endpoint's reported frequency.
+	 * Always start with original frequency since its deviation can't
+	 * be measured at start of playback
+	 */
+	prm->ffback = params->c_srate;
+	u_audio_set_fback_frequency(audio_dev->gadget->speed,
+				    prm->ffback, req_fback->buf);
+
+	if (usb_ep_queue(ep_fback, req_fback, GFP_ATOMIC))
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(u_audio_start_capture);
@@ -382,6 +515,8 @@  void u_audio_stop_capture(struct g_audio *audio_dev)
 {
 	struct snd_uac_chip *uac = audio_dev->uac;
 
+	if (audio_dev->in_ep_fback)
+		free_ep_fback(&uac->c_prm, audio_dev->in_ep_fback);
 	free_ep(&uac->c_prm, audio_dev->out_ep);
 }
 EXPORT_SYMBOL_GPL(u_audio_stop_capture);
@@ -489,6 +624,7 @@  int g_audio_setup(struct g_audio *g_audio, const char *pcm_name,
 	if (c_chmask) {
 		struct uac_rtd_params *prm = &uac->c_prm;
 
+		spin_lock_init(&prm->lock);
 		uac->c_prm.uac = uac;
 		prm->max_psize = g_audio->out_ep_maxpsize;
 
@@ -512,6 +648,7 @@  int g_audio_setup(struct g_audio *g_audio, const char *pcm_name,
 	if (p_chmask) {
 		struct uac_rtd_params *prm = &uac->p_prm;
 
+		spin_lock_init(&prm->lock);
 		uac->p_prm.uac = uac;
 		prm->max_psize = g_audio->in_ep_maxpsize;
 
diff --git a/drivers/usb/gadget/function/u_audio.h b/drivers/usb/gadget/function/u_audio.h
index 5ea6b86..53e6baf 100644
--- a/drivers/usb/gadget/function/u_audio.h
+++ b/drivers/usb/gadget/function/u_audio.h
@@ -30,7 +30,10 @@  struct g_audio {
 	struct usb_gadget *gadget;
 
 	struct usb_ep *in_ep;
+
 	struct usb_ep *out_ep;
+	/* feedback IN endpoint corresponding to out_ep */
+	struct usb_ep *in_ep_fback;
 
 	/* Max packet size for all in_ep possible speeds */
 	unsigned int in_ep_maxpsize;