| Message ID | 20181026053315.32188-1-kai.heng.feng@canonical.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | USB: quirks: Add no-lpm quirk for Raydium touchscreens | expand |
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 178d6c6063c0..99f525ac4b2e 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -411,6 +411,11 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x2040, 0x7200), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Raydium Touchscreen */ + { USB_DEVICE(0x2386, 0x3114), .driver_info = USB_QUIRK_NO_LPM }, + + { USB_DEVICE(0x2386, 0x3119), .driver_info = USB_QUIRK_NO_LPM }, + /* DJI CineSSD */ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
Raydium USB touchscreen fails to set config if LPM is enabled: [ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119 [ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.030660] usb 1-8: Product: Raydium Touch System [ 2.030661] usb 1-8: Manufacturer: Raydium Corporation [ 7.132209] usb 1-8: can't set config #1, error -110 Same behavior can be observed on 2386:3114. Raydium claims the touchscreen supports LPM under Windows, so I used Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows that the LPM doesn't work under Windows, either. So let's just disable LPM for Raydium touchscreens. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> --- drivers/usb/core/quirks.c | 5 +++++ 1 file changed, 5 insertions(+)