| Message ID | 20181228153442.GA23402@kroah.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [GIT,PULL] USB/PHY driver patches for 4.21-rc1 | expand |
The pull request you sent on Fri, 28 Dec 2018 16:34:42 +0100:
> git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git tags/usb-4.21-rc1
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/c0ea81b4d37837409d0dfd2036098a7babb312ed
Thank you!
The following changes since commit 177c459b08a34dcf004aa9a4c1f1d8be682ff3af: Merge tag 'usb-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb (2018-12-20 07:27:39 -0800) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git tags/usb-4.21-rc1 for you to fetch changes up to 4b2c01ad902ec02fa962b233decd2f14be3714ba: USB: serial: option: add Fibocom NL678 series (2018-12-21 16:47:02 +0100) ---------------------------------------------------------------- USB/PHY patches for 4.21-rc1 Here is the big set of USB and PHY driver patches for 4.21-rc1. All of the usual bits are in here: - loads of USB gadget driver updates and additions - new device ids - phy driver updates - xhci reworks and new features - typec updates Full details are in the shortlog. All of these have been in linux-next for a long time with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> ---------------------------------------------------------------- Alan Douglas (2): dt-bindings: phy: Document cadence Sierra PHY bindings phy: cadence: Add driver for Sierra PHY Alexander Theissen (2): usb: appledisplay: Set urb transfer_flags to URB_NO_TRANSFER_DMA_MAP usb: appledisplay: Remove unnecessary spinlock Andrzej Pietrasiewicz (1): usb: gadget: f_fs: Allow scatter-gather buffers Andy Shevchenko (4): usb: dwc3: drd: Switch to device property for 'extcon' handling usb: dwc3: drd: Add support for DR detection through extcon staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name usb: dwc3: trace: add missing break statement to make compiler happy Anurag Kumar Vulisha (3): usb: dwc3: update stream id in depcmd usb: dwc3: don't issue no-op trb for stream capable endpoints usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb() Arnd Bergmann (1): usb: renesas_usbhs: mark PM functions as __maybe_unused Artur Petrosyan (2): usb: dwc2: gadget: Fix WkupAlert interrupt handler. usb: dwc2: gadget: Accept LPM token when TxFIFO is not empty Badhri Jagan Sridharan (3): dt-bindings: connector: Add self-powered property usb: typec: tcpm: Do not disconnect link for self powered devices usb: typec: tcpm: charge current handling for sink during hard reset Bin Liu (2): usb: musb: dsps: fix otg state machine usb: musb: dsps: fix runtime pm for peripheral mode Brian Norris (1): usb: dwc3: don't log probe deferrals; but do log other error codes Chengguang Xu (1): usb: host: remove unnecessary condition check Christoph Hellwig (1): USB: remove the unused struct hcd_timeout definition Chunfeng Yun (10): usb: mtu3: remove QMU checksum usb: mtu3: enable hardware remote wakeup from L1 automatically usb: mtu3: fix the issue about SetFeature(U1/U2_Enable) usb: mtu3: enable SETUPENDISR interrupt usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS mode usb: mtu3: remove QMU checksum usb: mtu3: enable hardware remote wakeup from L1 automatically usb: mtu3: fix the issue about SetFeature(U1/U2_Enable) usb: mtu3: enable SETUPENDISR interrupt usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS mode Colin Ian King (5): uwb: clean an indentation issue, remove extraneous tab USB: gadget: udc: fix spelling mistake "intrerrupt" -> "interrupt" USB: ene_usb6250: add missing indentation drivers: usb: early: clean up indentation, remove extraneous tabs usb: gadget: udc: fix spelling mistake "intrerrupt" -> "interrupt" Evan Green (4): dt-bindings: phy-qcom-qmp: Fix register underspecification phy: qcom-qmp: Utilize fully-specified DT registers dt-bindings: phy-qcom-qmp: Move #clock-cells to child phy: qcom-qmp: Expose provided clocks to DT Fabrizio Castro (1): usb: renesas_usbhs: add support for RZ/G2E Felipe Balbi (11): usb: dwc3: gadget: combine unaligned and zero flags usb: dwc3: gadget: track number of TRBs per request usb: dwc3: gadget: use num_trbs when skipping TRBs on ->dequeue() usb: dwc3: gadget: extract dwc3_gadget_ep_skip_trbs() usb: dwc3: gadget: introduce cancelled_list usb: dwc3: gadget: move requests to cancelled_list usb: dwc3: gadget: remove wait_end_transfer usb: dwc3: gadget: return errors from __dwc3_gadget_start_isoc() usb: dwc3: trace: log ep commands in hex usb: dwc3: gadget: remove unnecessary dev_info() usb: dwc3: gadget: check if dep->frame_number is still valid Greg Kroah-Hartman (8): Merge 4.20-rc4 into usb-next Merge 4.20-rc5 into usb-next Merge 4.20-rc6 into usb-next Merge tag 'phy-for-4.21_v1' of git://git.kernel.org/.../kishon/linux-phy into usb-next Merge tag 'usb-for-v4.21' of git://git.kernel.org/.../balbi/usb into usb-next Merge tag 'usb-ci-v4.21-rc1' of git://git.kernel.org/.../peter.chen/usb into usb-next Merge tag 'usb-serial-4.21-rc1' of https://git.kernel.org/.../johan/usb-serial into usb-next Merge USB 4.20-rc8 mergepoint into usb-next Grygorii Strashko (9): phy: core: rework phy_set_mode to accept phy mode and submode phy: core: add PHY_MODE_ETHERNET phy: ocelot-serdes: convert to use eth phy mode and submode phy: mvebu-cp110-comphy: convert to use eth phy mode and submode phy: core: clean up unused ethernet specific phy modes dt-bindings: phy: add cpsw port interface mode selection phy bindings phy: ti: introduce phy-gmii-sel driver dt-bindings: net: ti: cpsw: switch to use phy-gmii-sel phy net: ethernet: ti: cpsw: add support for port interface mode selection phy Heikki Krogerus (2): usb: roles: Add a description for the class to Kconfig usb: typec: Improve Alt Mode documentation Hsin-Yi, Wang (2): usb/mtu3: power down device ip at setup usb/mtu3: power down device ip at setup Icenowy Zheng (3): dt-bindings: phy: add binding for Allwinner H6 USB2 PHY phy: sun4i-usb: add support for missing USB PHY index phy: sun4i-usb: add support for H6 USB2 PHY JackyChou (2): USB: serial: mos7840: clean up register handling USB: serial: mos7840: add a product ID for the new product Jarkko Nikula (1): usb: renesas_usbhs: Remove dummy runtime PM callbacks Ji-Ze Hong (Peter Hong) (1): USB: serial: f81534: fix reading old/new IC config Jia-Ju Bai (1): usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable() Julia Lawall (2): usb: gadget: aspeed-vhub: constify usb_gadget_ops structure usb: gadget: uvc: constify vb2_ops structure Jörgen Storvist (1): USB: serial: option: add Fibocom NL678 series Kyle Tso (1): usb: typec: tcpm: Extend the matching rules on PPS APDO selection Li Jun (1): phy: add driver for Freescale i.MX8MQ USB3 PHY Lucas Stach (1): dt-bindings: phy: add binding for Freescale i.MX8MQ USB3 PHY Macpaul Lin (1): cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader. Marek Szyprowski (1): usb: dwc2: Disable power down feature on Samsung SoCs Martin Blumenstingl (1): usb: dwc2: disable power_down on Amlogic devices Mathias Nyman (8): usb: hub: delay hub autosuspend if USB3 port is still link training xhci: move bus_state structure under the xhci_hub structure. xhci: remove unused hcd_index() xhci: move usb3 speficic bits to own function in get_port_status call xhci: move usb2 speficic bits to own function in get_port_status call xhci: cleanup code that sets portstatus and portchange bits xhci: refactor U0 link state handling in get_port_status xhci: move usb2 get port status link resume handling to its own function Maxime Ripard (4): phy: Add MIPI D-PHY mode phy: Add configuration interface phy: Add MIPI D-PHY configuration options phy: dphy: Add configuration helpers Minas Harutyunyan (1): usb: dwc2: Fix disable all EP's on disconnect Miquel Raynal (1): phy: mvebu-cp110-comphy: fix spelling in structure name Nikolaj Fogh (1): USB: serial: ftdi_sio: use rounding when calculating baud rate divisors Peter Chen (4): usb: chipidea: add flag for imx hsic implementation usb: chipidea: imx: add HSIC support usb: chipidea: host: override ehci->hub_control doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups Rob Herring (2): MAINTAINERS: Add Kishon as maintainer of PHY bindings phy: Use of_node_name_eq for node name comparisons Roger Quadros (1): usb: ehci-omap: Fix deferred probe for phy handling Scott Chen (1): USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays Stephan Gerhold (1): Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs" Suwan Kim (1): usb: core: Remove unnecessary memset() Tejas Joglekar (1): usb: dwc3: gadget: Disable CSP for stream OUT ep Terin Stock (1): usb: dwc2: host: use hrtimer for NAK retries Thinh Nguyen (14): usb: dwc3: debugfs: Properly name Tx/RxFIFO usb: dwc3: debugfs: Print eps Tx/RxFIFO in bytes usb: dwc3: debugfs: Dump internal LSP and ep registers usb: dwc3: debugfs: Properly print/set link state for HS usb: dwc3: debugfs: Print/set link state for peripheral mode usb: dwc3: Set GUSB2PHYCFG.ENBLSLPM usb: dwc3: Add a property to disable USB2 LPM usb: dwc3: Support option to disable USB2 LPM usb: dwc3: Set default mode for DWC_usb3 v3.30a and higher usb: dwc3: Track DWC_usb31 VERSIONTYPE usb: dwc3: Add disabling of start_transfer failure quirk usb: dwc3: Add workaround for isoc start transfer failure usb: gadget: Introduce frame_number to usb_request usb: dwc3: gadget: Report isoc transfer frame number Thiébaud Weksteen (1): Documentation/usb: Fix typo Tony Lindgren (1): phy: mapphone-mdm6600: Improve phy related runtime PM calls Uwe Kleine-König (3): usb: chipidea: imx: support configuring for active low oc signal usb: chipidea: imx: Warn if oc polarity isn't specified usb: chipidea: imx: allow to configure oc polarity on i.MX25 Vincent Pelletier (1): usb: gadget: f_fs: Add support for CCID descriptors. Yangtao Li (2): USB: gadget: udc: s3c2410_udc: convert to DEFINE_SHOW_ATTRIBUTE usb: host: isp1362-hcd: convert to DEFINE_SHOW_ATTRIBUTE Yoshihiro Shimoda (3): usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_device usb: renesas_usbhs: Use SIMPLE_DEV_PM_OPS macro phy: renesas: rcar-gen3-usb2: follow the hardware manual procedure YueHaibing (4): USB: serial: quatech2: remove set but not used variable 'port_priv' USB: serial: mos7840: remove set but not used variables 'st, data1, iflag' usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handler USB: serial: mos7840: remove set but not used variables 'number, serial' Zeng Tao (1): xhci: remove the unused sw_lpm_support kbuild test robot (1): phy: ti: fix semicolon.cocci warnings .../bindings/connector/usb-connector.txt | 2 + Documentation/devicetree/bindings/net/cpsw.txt | 8 +- .../devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt | 17 + .../devicetree/bindings/phy/phy-cadence-sierra.txt | 67 ++++ .../devicetree/bindings/phy/qcom-qmp-phy.txt | 77 +++- .../devicetree/bindings/phy/sun4i-usb-phy.txt | 8 +- .../devicetree/bindings/phy/ti-phy-gmii-sel.txt | 68 ++++ .../devicetree/bindings/usb/ci-hdrc-usb2.txt | 36 +- Documentation/devicetree/bindings/usb/dwc3.txt | 4 + Documentation/driver-api/usb/index.rst | 1 + Documentation/driver-api/usb/typec.rst | 1 + Documentation/driver-api/usb/typec_bus.rst | 24 +- Documentation/usb/authorization.txt | 2 +- MAINTAINERS | 1 + drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 19 +- drivers/net/ethernet/mscc/ocelot.c | 9 +- drivers/net/ethernet/ti/cpsw.c | 19 +- drivers/phy/Kconfig | 9 + drivers/phy/Makefile | 2 + drivers/phy/allwinner/phy-sun4i-usb.c | 29 +- drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 +- drivers/phy/amlogic/phy-meson-gxl-usb3.c | 5 +- drivers/phy/cadence/Kconfig | 9 +- drivers/phy/cadence/Makefile | 1 + drivers/phy/cadence/phy-cadence-sierra.c | 395 +++++++++++++++++++++ drivers/phy/freescale/Kconfig | 5 + drivers/phy/freescale/Makefile | 1 + drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 127 +++++++ drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 97 ++--- drivers/phy/mediatek/phy-mtk-tphy.c | 2 +- drivers/phy/mediatek/phy-mtk-xsphy.c | 2 +- drivers/phy/motorola/phy-mapphone-mdm6600.c | 71 ++-- drivers/phy/mscc/phy-ocelot-serdes.c | 24 +- drivers/phy/phy-core-mipi-dphy.c | 166 +++++++++ drivers/phy/phy-core.c | 70 +++- drivers/phy/qualcomm/phy-qcom-qmp.c | 77 +++- drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 +- drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c | 3 +- drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c | 3 +- drivers/phy/qualcomm/phy-qcom-usb-hs.c | 3 +- drivers/phy/renesas/phy-rcar-gen3-usb2.c | 17 +- drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 6 +- drivers/phy/rockchip/phy-rockchip-typec.c | 4 +- drivers/phy/ti/Kconfig | 10 + drivers/phy/ti/Makefile | 1 + drivers/phy/ti/phy-da8xx-usb.c | 3 +- drivers/phy/ti/phy-gmii-sel.c | 349 ++++++++++++++++++ drivers/phy/ti/phy-tusb1210.c | 2 +- drivers/platform/x86/intel_cht_int33fe.c | 2 +- drivers/usb/Kconfig | 4 - drivers/usb/chipidea/ci_hdrc_imx.c | 158 +++++++-- drivers/usb/chipidea/ci_hdrc_imx.h | 17 +- drivers/usb/chipidea/host.c | 92 +++++ drivers/usb/chipidea/usbmisc_imx.c | 183 +++++++++- drivers/usb/class/cdc-acm.c | 10 + drivers/usb/class/cdc-acm.h | 1 + drivers/usb/common/Makefile | 1 - drivers/usb/core/hcd.c | 2 - drivers/usb/core/hub.c | 10 + drivers/usb/dwc2/gadget.c | 44 ++- drivers/usb/dwc2/hcd.h | 2 +- drivers/usb/dwc2/hcd_queue.c | 19 +- drivers/usb/dwc2/hw.h | 2 + drivers/usb/dwc2/params.c | 11 +- drivers/usb/dwc3/core.c | 19 +- drivers/usb/dwc3/core.h | 60 +++- drivers/usb/dwc3/debug.h | 29 ++ drivers/usb/dwc3/debugfs.c | 201 ++++++++++- drivers/usb/dwc3/drd.c | 15 +- drivers/usb/dwc3/dwc3-pci.c | 8 +- drivers/usb/dwc3/gadget.c | 342 +++++++++++------- drivers/usb/dwc3/gadget.h | 15 + drivers/usb/dwc3/host.c | 5 +- drivers/usb/dwc3/trace.h | 4 +- drivers/usb/early/ehci-dbgp.c | 38 +- drivers/usb/gadget/function/f_fs.c | 122 ++++++- drivers/usb/gadget/function/uvc_queue.c | 2 +- drivers/usb/gadget/udc/aspeed-vhub/dev.c | 2 +- drivers/usb/gadget/udc/pch_udc.c | 2 +- drivers/usb/gadget/udc/renesas_usb3.c | 15 +- drivers/usb/gadget/udc/s3c2410_udc.c | 17 +- drivers/usb/host/ehci-omap.c | 7 +- drivers/usb/host/isp1362-hcd.c | 16 +- drivers/usb/host/ohci-mem.c | 12 +- drivers/usb/host/r8a66597-hcd.c | 5 +- drivers/usb/host/xhci-hub.c | 351 ++++++++++-------- drivers/usb/host/xhci-mem.c | 30 +- drivers/usb/host/xhci-ring.c | 2 +- drivers/usb/host/xhci.c | 22 +- drivers/usb/host/xhci.h | 13 +- drivers/usb/misc/appledisplay.c | 8 +- drivers/usb/mtu3/mtu3_core.c | 20 +- drivers/usb/mtu3/mtu3_gadget_ep0.c | 14 +- drivers/usb/mtu3/mtu3_hw_regs.h | 6 + drivers/usb/mtu3/mtu3_plat.c | 8 + drivers/usb/mtu3/mtu3_qmu.c | 28 +- drivers/usb/musb/musb_dsps.c | 21 +- drivers/usb/renesas_usbhs/common.c | 27 +- drivers/usb/roles/Kconfig | 13 + drivers/usb/roles/Makefile | 4 +- drivers/usb/{common/roles.c => roles/class.c} | 0 drivers/usb/serial/f81534.c | 20 +- drivers/usb/serial/ftdi_sio.c | 6 +- drivers/usb/serial/mos7840.c | 71 ++-- drivers/usb/serial/option.c | 4 + drivers/usb/serial/pl2303.c | 5 + drivers/usb/serial/pl2303.h | 5 + drivers/usb/serial/quatech2.c | 3 - drivers/usb/storage/ene_ub6250.c | 2 +- drivers/usb/typec/tcpm/fusb302.c | 2 +- drivers/usb/typec/tcpm/tcpm.c | 56 ++- drivers/uwb/i1480/dfu/usb.c | 2 +- include/linux/phy/phy-mipi-dphy.h | 285 +++++++++++++++ include/linux/phy/phy.h | 83 ++++- include/linux/usb/ccid.h | 51 +++ include/linux/usb/chipidea.h | 3 + include/linux/usb/gadget.h | 4 + include/linux/usb/hcd.h | 5 - include/linux/usb/tcpm.h | 1 + 119 files changed, 3695 insertions(+), 838 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt create mode 100644 Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt create mode 100644 drivers/phy/cadence/phy-cadence-sierra.c create mode 100644 drivers/phy/freescale/Kconfig create mode 100644 drivers/phy/freescale/Makefile create mode 100644 drivers/phy/freescale/phy-fsl-imx8mq-usb.c create mode 100644 drivers/phy/phy-core-mipi-dphy.c create mode 100644 drivers/phy/ti/phy-gmii-sel.c rename drivers/usb/{common/roles.c => roles/class.c} (100%) create mode 100644 include/linux/phy/phy-mipi-dphy.h create mode 100644 include/linux/usb/ccid.h