| Message ID | 20190111133133.24803-3-miquel.raynal@bootlin.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | A3700 USB S2RAM support | expand |
Hi Miquel, On ven., janv. 11 2019, Miquel Raynal <miquel.raynal@bootlin.com> wrote: > From: Ofer Heifetz <oferh@marvell.com> > > The mvebu xHCI host driver does not have suspend/resume support. Use of > the XHCI_RESET_ON_RESUME quirk is mandatory in order to avoid failures > after resume. This will work only if no USB device is plugged-in. > > While at it, mention in the Kconfig file that this IP is also present > on the A3700 SoC. > > Signed-off-by: Ofer Heifetz <oferh@marvell.com> > [miquel.raynal@bootlin.com: Reword the commit message] > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > --- > drivers/usb/host/Kconfig | 4 ++-- > drivers/usb/host/xhci-mvebu.c | 11 +++++++++++ > drivers/usb/host/xhci-mvebu.h | 6 ++++++ > drivers/usb/host/xhci-plat.c | 7 +++++++ > 4 files changed, 26 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index 16758b12a5e9..13d59be6a6aa 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -69,13 +69,13 @@ config USB_XHCI_MTK > If unsure, say N. > > config USB_XHCI_MVEBU > - tristate "xHCI support for Marvell Armada 375/38x" > + tristate "xHCI support for Marvell Armada 375/38x/3700" I would name it 37xx to be consistent with 38x > select USB_XHCI_PLATFORM > depends on HAS_IOMEM > depends on ARCH_MVEBU || COMPILE_TEST > ---help--- > Say 'Y' to enable the support for the xHCI host controller > - found in Marvell Armada 375/38x ARM SOCs. > + found in Marvell Armada 375/38x/3700 ARM SOCs. same here > > config USB_XHCI_RCAR > tristate "xHCI support for Renesas R-Car SoCs" > diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c > index 32e158568788..60651a50770f 100644 > --- a/drivers/usb/host/xhci-mvebu.c > +++ b/drivers/usb/host/xhci-mvebu.c > @@ -13,6 +13,7 @@ > #include <linux/usb/hcd.h> > > #include "xhci-mvebu.h" > +#include "xhci.h" > > #define USB3_MAX_WINDOWS 4 > #define USB3_WIN_CTRL(w) (0x0 + ((w) * 8)) > @@ -72,3 +73,13 @@ int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) > > return 0; > } > + > +int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) > +{ > + struct xhci_hcd *xhci = hcd_to_xhci(hcd); > + > + /* Without reset on resume, the HC won't work at all */ > + xhci->quirks |= XHCI_RESET_ON_RESUME; > + > + return 0; > +} > diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h > index 09791df2cec0..ca0a3a5721dd 100644 > --- a/drivers/usb/host/xhci-mvebu.h > +++ b/drivers/usb/host/xhci-mvebu.h > @@ -12,10 +12,16 @@ struct usb_hcd; > > #if IS_ENABLED(CONFIG_USB_XHCI_MVEBU) > int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd); > +int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd); > #else > static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) > { > return 0; > } > + > +static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) > +{ > + return 0; > +} > #endif > #endif /* __LINUX_XHCI_MVEBU_H */ > diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c > index ef09cb06212f..0ac4ec975547 100644 > --- a/drivers/usb/host/xhci-plat.c > +++ b/drivers/usb/host/xhci-plat.c > @@ -98,6 +98,10 @@ static const struct xhci_plat_priv xhci_plat_marvell_armada = { > .init_quirk = xhci_mvebu_mbus_init_quirk, > }; > > +static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = { > + .init_quirk = xhci_mvebu_a3700_init_quirk, > +}; > + > static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { > .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1, > .init_quirk = xhci_rcar_init_quirk, > @@ -123,6 +127,9 @@ static const struct of_device_id usb_xhci_of_match[] = { > }, { > .compatible = "marvell,armada-380-xhci", > .data = &xhci_plat_marvell_armada, > + }, { > + .compatible = "marvell,armada3700-xhci", > + .data = &xhci_plat_marvell_armada3700, Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Thanks, Gregory
Hi Gregory, Gregory CLEMENT <gregory.clement@bootlin.com> wrote on Fri, 18 Jan 2019 17:04:01 +0100: > Hi Miquel, > > On ven., janv. 11 2019, Miquel Raynal <miquel.raynal@bootlin.com> wrote: > > > From: Ofer Heifetz <oferh@marvell.com> > > > > The mvebu xHCI host driver does not have suspend/resume support. Use of > > the XHCI_RESET_ON_RESUME quirk is mandatory in order to avoid failures > > after resume. This will work only if no USB device is plugged-in. > > > > While at it, mention in the Kconfig file that this IP is also present > > on the A3700 SoC. > > > > Signed-off-by: Ofer Heifetz <oferh@marvell.com> > > [miquel.raynal@bootlin.com: Reword the commit message] > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > > --- > > drivers/usb/host/Kconfig | 4 ++-- > > drivers/usb/host/xhci-mvebu.c | 11 +++++++++++ > > drivers/usb/host/xhci-mvebu.h | 6 ++++++ > > drivers/usb/host/xhci-plat.c | 7 +++++++ > > 4 files changed, 26 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > > index 16758b12a5e9..13d59be6a6aa 100644 > > --- a/drivers/usb/host/Kconfig > > +++ b/drivers/usb/host/Kconfig > > @@ -69,13 +69,13 @@ config USB_XHCI_MTK > > If unsure, say N. > > > > config USB_XHCI_MVEBU > > - tristate "xHCI support for Marvell Armada 375/38x" > > + tristate "xHCI support for Marvell Armada 375/38x/3700" > > I would name it 37xx to be consistent with 38x > > > select USB_XHCI_PLATFORM > > depends on HAS_IOMEM > > depends on ARCH_MVEBU || COMPILE_TEST > > ---help--- > > Say 'Y' to enable the support for the xHCI host controller > > - found in Marvell Armada 375/38x ARM SOCs. > > + found in Marvell Armada 375/38x/3700 ARM SOCs. > same here > Sure! Thanks, Miquèl
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 16758b12a5e9..13d59be6a6aa 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -69,13 +69,13 @@ config USB_XHCI_MTK If unsure, say N. config USB_XHCI_MVEBU - tristate "xHCI support for Marvell Armada 375/38x" + tristate "xHCI support for Marvell Armada 375/38x/3700" select USB_XHCI_PLATFORM depends on HAS_IOMEM depends on ARCH_MVEBU || COMPILE_TEST ---help--- Say 'Y' to enable the support for the xHCI host controller - found in Marvell Armada 375/38x ARM SOCs. + found in Marvell Armada 375/38x/3700 ARM SOCs. config USB_XHCI_RCAR tristate "xHCI support for Renesas R-Car SoCs" diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c index 32e158568788..60651a50770f 100644 --- a/drivers/usb/host/xhci-mvebu.c +++ b/drivers/usb/host/xhci-mvebu.c @@ -13,6 +13,7 @@ #include <linux/usb/hcd.h> #include "xhci-mvebu.h" +#include "xhci.h" #define USB3_MAX_WINDOWS 4 #define USB3_WIN_CTRL(w) (0x0 + ((w) * 8)) @@ -72,3 +73,13 @@ int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) return 0; } + +int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + /* Without reset on resume, the HC won't work at all */ + xhci->quirks |= XHCI_RESET_ON_RESUME; + + return 0; +} diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h index 09791df2cec0..ca0a3a5721dd 100644 --- a/drivers/usb/host/xhci-mvebu.h +++ b/drivers/usb/host/xhci-mvebu.h @@ -12,10 +12,16 @@ struct usb_hcd; #if IS_ENABLED(CONFIG_USB_XHCI_MVEBU) int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd); +int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd); #else static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) { return 0; } + +static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) +{ + return 0; +} #endif #endif /* __LINUX_XHCI_MVEBU_H */ diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index ef09cb06212f..0ac4ec975547 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -98,6 +98,10 @@ static const struct xhci_plat_priv xhci_plat_marvell_armada = { .init_quirk = xhci_mvebu_mbus_init_quirk, }; +static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = { + .init_quirk = xhci_mvebu_a3700_init_quirk, +}; + static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1, .init_quirk = xhci_rcar_init_quirk, @@ -123,6 +127,9 @@ static const struct of_device_id usb_xhci_of_match[] = { }, { .compatible = "marvell,armada-380-xhci", .data = &xhci_plat_marvell_armada, + }, { + .compatible = "marvell,armada3700-xhci", + .data = &xhci_plat_marvell_armada3700, }, { .compatible = "renesas,xhci-r8a7790", .data = &xhci_plat_renesas_rcar_gen2,