@@ -676,7 +676,6 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
tcpc_dev);
int ret = 0;
bool pull_up, pull_down;
- u8 rd_mda;
enum toggling_mode mode;
mutex_lock(&chip->lock);
@@ -684,16 +683,19 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
case TYPEC_CC_OPEN:
pull_up = false;
pull_down = false;
+ mode = TOGGLING_MODE_OFF;
break;
case TYPEC_CC_RD:
pull_up = false;
pull_down = true;
+ mode = TOGGLING_MODE_SNK;
break;
case TYPEC_CC_RP_DEF:
case TYPEC_CC_RP_1_5:
case TYPEC_CC_RP_3_0:
pull_up = true;
pull_down = false;
+ mode = TOGGLING_MODE_SRC;
break;
default:
fusb302_log(chip, "unsupported cc value %s",
@@ -701,11 +703,9 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
ret = -EINVAL;
goto done;
}
- ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
- if (ret < 0) {
- fusb302_log(chip, "cannot stop toggling, ret=%d", ret);
- goto done;
- }
+
+ fusb302_log(chip, "cc := %s", typec_cc_status_name[cc]);
+
ret = fusb302_set_cc_pull(chip, pull_up, pull_down);
if (ret < 0) {
fusb302_log(chip,
@@ -718,74 +718,19 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
/* reset the cc status */
chip->cc1 = TYPEC_CC_OPEN;
chip->cc2 = TYPEC_CC_OPEN;
+
/* adjust current for SRC */
- if (pull_up) {
- ret = fusb302_set_src_current(chip, cc_src_current[cc]);
- if (ret < 0) {
- fusb302_log(chip, "cannot set src current %s, ret=%d",
- typec_cc_status_name[cc], ret);
- goto done;
- }
- }
- /* enable/disable interrupts, BC_LVL for SNK and COMP_CHNG for SRC */
- if (pull_up) {
- rd_mda = rd_mda_value[cc_src_current[cc]];
- ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
- if (ret < 0) {
- fusb302_log(chip,
- "cannot set SRC measure value, ret=%d",
- ret);
- goto done;
- }
- ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
- FUSB_REG_MASK_BC_LVL |
- FUSB_REG_MASK_COMP_CHNG,
- FUSB_REG_MASK_COMP_CHNG);
- if (ret < 0) {
- fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
- ret);
- goto done;
- }
- chip->intr_bc_lvl = false;
- chip->intr_comp_chng = true;
- }
- if (pull_down) {
- ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
- FUSB_REG_MASK_BC_LVL |
- FUSB_REG_MASK_COMP_CHNG,
- FUSB_REG_MASK_BC_LVL);
- if (ret < 0) {
- fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
- ret);
- goto done;
- }
- chip->intr_bc_lvl = true;
- chip->intr_comp_chng = false;
+ ret = fusb302_set_src_current(chip, cc_src_current[cc]);
+ if (ret < 0) {
+ fusb302_log(chip, "cannot set src current %s, ret=%d",
+ typec_cc_status_name[cc], ret);
+ goto done;
}
- fusb302_log(chip, "cc := %s", typec_cc_status_name[cc]);
- /* Enable detection for fixed SNK or SRC only roles */
- switch (cc) {
- case TYPEC_CC_RD:
- mode = TOGGLING_MODE_SNK;
- break;
- case TYPEC_CC_RP_DEF:
- case TYPEC_CC_RP_1_5:
- case TYPEC_CC_RP_3_0:
- mode = TOGGLING_MODE_SRC;
- break;
- default:
- mode = TOGGLING_MODE_OFF;
- break;
- }
+ ret = fusb302_set_toggling(chip, mode);
+ if (ret < 0)
+ fusb302_log(chip, "cannot set toggling mode, ret=%d", ret);
- if (mode != TOGGLING_MODE_OFF) {
- ret = fusb302_set_toggling(chip, mode);
- if (ret < 0)
- fusb302_log(chip,
- "cannot set fixed role toggling mode, ret=%d",
- ret);
- }
done:
mutex_unlock(&chip->lock);
After commit ea3b4d5523bc ("usb: typec: fusb302: Resolve fixed power role contract setup"), tcpm_set_cc always calls fusb302_set_toggling. Before this refactor tcpm_set_cc does the following: 1) fusb302_set_toggling(TOGGLING_MODE_OFF), this sets both FUSB_REG_MASK_BC_LVL and FUSB_REG_MASK_COMP_CHNG. 2) fusb302_set_cc_pull(...). 3) "reset cc status". 4) if pull-up fusb302_set_src_current(...). 5) if pull-up or pull-down enable bc-lvl resp comp-chng irq. 6) fusb302_set_toggling(new-toggling-mode), which again sets both FUSB_REG_MASK_BC_LVL and FUSB_REG_MASK_COMP_CHNG disabling the just enabled irq. fusb302_set_toggling is skipped when the new toggling mode is TOGGLING_MODE_OFF because this is already done in 1, note in this case 5) is a no-op. When we are toggling the bits set by fusb302_set_cc_pull will be ignored until we turn toggling off, so we can safely move the fusb302_set_cc_pull call to before setting TOGGLING_MODE_OFF. Either we are not toggling yet, or the src-current has already been set, so we can also safely set the src-current earlier, allowing us to do the fusb302_set_toggling(TOGGLING_MODE_OFF) call at the same time as we set the other toggling modes. Also setting the src-current is a no-op when not enabling pull-ups, so we can drop the if. And since the second fusb302_set_toggling undoes the effects of step 5, we can skip step 5, the bc-lvl resp comp-chng irq wil be enabled by fusb302_handle_togdone_snk resp. fusb302_handle_togdone_src when toggling is done. Together this allows us to simplify things to: 1) fusb302_set_cc_pull(...) 2) "reset cc status" 3) fusb302_set_src_current(...) 4) fusb302_set_toggling(new-toggling-mode) This commit does this, leading to a nice cleanup. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/usb/typec/tcpm/fusb302.c | 85 ++++++-------------------------- 1 file changed, 15 insertions(+), 70 deletions(-)