@@ -98,7 +98,6 @@ struct cypress_private {
int write_urb_interval; /* interval to use for write urb */
int read_urb_interval; /* interval to use for read urb */
int comm_is_ok; /* true if communication is (still) ok */
- int termios_initialized;
__u8 line_control; /* holds dtr / rts value */
__u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */
__u8 current_config; /* stores the current configuration byte */
@@ -122,6 +121,7 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static void cypress_send(struct usb_serial_port *port);
static int cypress_write_room(struct tty_struct *tty);
+static void cypress_earthmate_init_termios(struct tty_struct *tty);
static void cypress_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
static int cypress_tiocmget(struct tty_struct *tty);
@@ -149,6 +149,7 @@ static struct usb_serial_driver cypress_earthmate_device = {
.dtr_rts = cypress_dtr_rts,
.write = cypress_write,
.write_room = cypress_write_room,
+ .init_termios = cypress_earthmate_init_termios,
.set_termios = cypress_set_termios,
.tiocmget = cypress_tiocmget,
.tiocmset = cypress_tiocmset,
@@ -463,7 +464,6 @@ static int cypress_generic_port_probe(struct usb_serial_port *port)
priv->cmd_ctrl = 0;
priv->line_control = 0;
- priv->termios_initialized = 0;
priv->rx_flags = 0;
/* Default packet format setting is determined by packet size.
Anything with a size larger then 9 must have a separate
@@ -853,6 +853,11 @@ static int cypress_tiocmset(struct tty_struct *tty,
return cypress_write(tty, port, NULL, 0);
}
+static void cypress_earthmate_init_termios(struct tty_struct *tty)
+{
+ tty_encode_baud_rate(tty, 4800, 4800);
+}
+
static void cypress_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
@@ -864,33 +869,6 @@ static void cypress_set_termios(struct tty_struct *tty,
__u8 oldlines;
int linechange = 0;
- spin_lock_irqsave(&priv->lock, flags);
- /* We can't clean this one up as we don't know the device type
- early enough */
- if (!priv->termios_initialized) {
- if (priv->chiptype == CT_EARTHMATE) {
- tty->termios = tty_std_termios;
- tty->termios.c_cflag = B4800 | CS8 | CREAD | HUPCL |
- CLOCAL;
- tty->termios.c_ispeed = 4800;
- tty->termios.c_ospeed = 4800;
- } else if (priv->chiptype == CT_CYPHIDCOM) {
- tty->termios = tty_std_termios;
- tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
- CLOCAL;
- tty->termios.c_ispeed = 9600;
- tty->termios.c_ospeed = 9600;
- } else if (priv->chiptype == CT_CA42V2) {
- tty->termios = tty_std_termios;
- tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
- CLOCAL;
- tty->termios.c_ispeed = 9600;
- tty->termios.c_ospeed = 9600;
- }
- priv->termios_initialized = 1;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
-
/* Unsupported features need clearing */
tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
Now that init_termios() is only called on first use, we can clean up the cypress_m8 initial-termios handling. Note that only the earthmate chip type used settings different from the defaults provided by USB serial core, and that the chip type is indeed known when init_termios is called at tty-install time. Signed-off-by: Johan Hovold <johan@kernel.org> --- drivers/usb/serial/cypress_m8.c | 36 +++++++-------------------------- 1 file changed, 7 insertions(+), 29 deletions(-)