@@ -274,11 +274,14 @@ static int ci_hdrc_imx_notify_event(struct ci_hdrc *ci, unsigned int event)
switch (event) {
case CI_HDRC_IMX_HSIC_ACTIVE_EVENT:
- ret = pinctrl_select_state(data->pinctrl,
- data->pinctrl_hsic_active);
- if (ret)
- dev_err(dev, "hsic_active select failed, err=%d\n",
- ret);
+ if (data->pinctrl) {
+ ret = pinctrl_select_state(data->pinctrl,
+ data->pinctrl_hsic_active);
+ if (ret)
+ dev_err(dev,
+ "hsic_active select failed, err=%d\n",
+ ret);
+ }
break;
case CI_HDRC_IMX_HSIC_SUSPEND_EVENT:
ret = imx_usbmisc_hsic_set_connect(data->usbmisc_data);
@@ -306,7 +309,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
const struct ci_hdrc_imx_platform_flag *imx_platform_flag;
struct device_node *np = pdev->dev.of_node;
struct device *dev = &pdev->dev;
- struct pinctrl_state *pinctrl_hsic_idle;
of_id = of_match_device(ci_hdrc_imx_dt_ids, dev);
if (!of_id)
@@ -339,6 +341,33 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
return PTR_ERR(data->pinctrl);
}
+ data->hsic_pad_regulator =
+ devm_regulator_get_optional(dev, "hsic");
+ if (PTR_ERR(data->hsic_pad_regulator) == -ENODEV) {
+ /* no pad regualator is needed */
+ data->hsic_pad_regulator = NULL;
+ } else if (IS_ERR(data->hsic_pad_regulator)) {
+ if (PTR_ERR(data->hsic_pad_regulator) != -EPROBE_DEFER)
+ dev_err(dev,
+ "Get HSIC pad regulator error: %ld\n",
+ PTR_ERR(data->hsic_pad_regulator));
+ return PTR_ERR(data->hsic_pad_regulator);
+ }
+
+ if (data->hsic_pad_regulator) {
+ ret = regulator_enable(data->hsic_pad_regulator);
+ if (ret) {
+ dev_err(dev,
+ "Failed to enable HSIC pad regulator\n");
+ return ret;
+ }
+ }
+ }
+
+ /* HSIC pinctrl handling */
+ if (data->pinctrl) {
+ struct pinctrl_state *pinctrl_hsic_idle;
+
pinctrl_hsic_idle = pinctrl_lookup_state(data->pinctrl, "idle");
if (IS_ERR(pinctrl_hsic_idle)) {
dev_err(dev,
@@ -361,28 +390,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
PTR_ERR(data->pinctrl_hsic_active));
return PTR_ERR(data->pinctrl_hsic_active);
}
-
- data->hsic_pad_regulator =
- devm_regulator_get_optional(dev, "hsic");
- if (PTR_ERR(data->hsic_pad_regulator) == -ENODEV) {
- /* no pad regualator is needed */
- data->hsic_pad_regulator = NULL;
- } else if (IS_ERR(data->hsic_pad_regulator)) {
- if (PTR_ERR(data->hsic_pad_regulator) != -EPROBE_DEFER)
- dev_err(dev,
- "Get HSIC pad regulator error: %ld\n",
- PTR_ERR(data->hsic_pad_regulator));
- return PTR_ERR(data->hsic_pad_regulator);
- }
-
- if (data->hsic_pad_regulator) {
- ret = regulator_enable(data->hsic_pad_regulator);
- if (ret) {
- dev_err(dev,
- "Failed to enable HSIC pad regulator\n");
- return ret;
- }
- }
}
if (pdata.flags & CI_HDRC_PMQOS)
For imx chipidea controllers, if they use mxs PHY, they need pinctrl for HSIC. Otherwise, it doesn't need pinctrl and usbmisc control. Like imx7d and imx8mm. Reported-by: AndréDraszik <git@andred.net> Signed-off-by: Peter Chen <peter.chen@nxp.com> --- drivers/usb/chipidea/ci_hdrc_imx.c | 63 +++++++++++++++++------------- 1 file changed, 35 insertions(+), 28 deletions(-)