@@ -8,11 +8,10 @@
*/
#include <linux/clk.h>
#include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/slab.h>
@@ -592,7 +591,8 @@ static int usbhs_probe(struct platform_device *pdev)
struct usbhs_priv *priv;
struct resource *irq_res;
struct device *dev = &pdev->dev;
- int ret, gpio;
+ struct gpio_desc *gpiod;
+ int ret;
u32 tmp;
/* check device node */
@@ -657,10 +657,9 @@ static int usbhs_probe(struct platform_device *pdev)
priv->dparam.pio_dma_border = 64; /* 64byte */
if (!of_property_read_u32(dev_of_node(dev), "renesas,buswait", &tmp))
priv->dparam.buswait_bwait = tmp;
- gpio = of_get_named_gpio_flags(dev_of_node(dev), "renesas,enable-gpio",
- 0, NULL);
- if (gpio > 0)
- priv->dparam.enable_gpio = gpio;
+ gpiod = devm_gpiod_get_optional(dev, "renesas,enable", GPIOD_IN);
+ if (IS_ERR(gpiod))
+ return PTR_ERR(gpiod);
/* FIXME */
/* runtime power control ? */
@@ -708,13 +707,10 @@ static int usbhs_probe(struct platform_device *pdev)
usbhs_sys_clock_ctrl(priv, 0);
/* check GPIO determining if USB function should be enabled */
- if (priv->dparam.enable_gpio) {
- gpio_request_one(priv->dparam.enable_gpio, GPIOF_IN, NULL);
- ret = !gpio_get_value(priv->dparam.enable_gpio);
- gpio_free(priv->dparam.enable_gpio);
+ if (gpiod) {
+ ret = !gpiod_get_value(gpiod);
if (ret) {
- dev_warn(dev, "USB function not selected (GPIO %d)\n",
- priv->dparam.enable_gpio);
+ dev_warn(dev, "USB function not selected (GPIO)\n");
ret = -ENOTSUPP;
goto probe_end_mod_exit;
}
@@ -6,8 +6,6 @@
* Copyright (C) 2019 Renesas Electronics Corporation
*/
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
#include <linux/phy/phy.h>
#include "common.h"
#include "rcar2.h"
@@ -170,8 +170,6 @@ struct renesas_usbhs_driver_param {
*/
int pio_dma_border; /* default is 64byte */
- u32 enable_gpio;
-
/*
* option:
*/
The Renesas USBHS driver includes a bit of surplus headers and uses the old GPIO API so let's switch it to use the GPIO descriptor. I noticed that the enable_gpio inside renesas_usbhs_driver_param isn't really referenced anywhere, and it is also the wrong type (u32) so let's just delete it and use a local variable instead. Cc: Eugeniu Rosca <erosca@de.adit-jv.com> Cc: Veeraiyan Chidambaram <veeraiyan.chidambaram@in.bosch.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/usb/renesas_usbhs/common.c | 22 +++++++++------------- drivers/usb/renesas_usbhs/rcar2.c | 2 -- include/linux/usb/renesas_usbhs.h | 2 -- 3 files changed, 9 insertions(+), 17 deletions(-)