@@ -9,4 +9,13 @@ config TYPEC_MUX_PI3USB30532
Say Y or M if your system has a Pericom PI3USB30532 Type-C cross
switch / mux chip found on some devices with a Type-C port.
+config TYPEC_MUX_INTEL_PMC
+ tristate "Intel PMC mux control"
+ depends on INTEL_PMC_IPC
+ select USB_ROLE_SWITCH
+ help
+ Driver for USB muxes controlled by Intel PMC FW. Intel PMC FW can
+ control the USB role switch and also the multiplexer/demultiplexer
+ switches used with USB Type-C Alternate Modes.
+
endmenu
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o
+obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o
new file mode 100644
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Intel PMC USB mux control
+ *
+ * Copyright (C) 2020 Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/usb/role.h>
+#include <linux/usb/typec_mux.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_tbt.h>
+
+#include <asm/intel_pmc_ipc.h>
+
+#define PMC_USBC_CMD 0xa7
+
+/* "Usage" OOB Message field values */
+enum {
+ PMC_USB_CONNECT,
+ PMC_USB_DISCONNECT,
+ PMC_USB_SAFE_MODE,
+ PMC_USB_ALT_MODE,
+ PMC_USB_DP_HPD,
+};
+
+#define PMC_USB_MSG_USB2_PORT_SHIFT 0
+#define PMC_USB_MSG_USB3_PORT_SHIFT 4
+#define PMC_USB_MSG_UFP_SHIFT 4
+#define PMC_USB_MSG_ORI_HSL_SHIFT 5
+#define PMC_USB_MSG_ORI_AUX_SHIFT 6
+
+/* Alt Mode Request */
+struct altmode_req {
+ u8 usage;
+ u8 mode_type;
+ u8 mode_id;
+ u8 reserved;
+ u32 mode_data;
+} __packed;
+
+#define PMC_USB_MODE_TYPE_SHIFT 4
+
+enum {
+ PMC_USB_MODE_TYPE_USB,
+ PMC_USB_MODE_TYPE_DP,
+ PMC_USB_MODE_TYPE_TBT,
+};
+
+/* Common Mode Data bits */
+#define PMC_USB_ALTMODE_ACTIVE_CABLE BIT(2)
+
+#define PMC_USB_ALTMODE_ORI_SHIFT 1
+#define PMC_USB_ALTMODE_UFP_SHIFT 3
+#define PMC_USB_ALTMODE_ORI_AUX_SHIFT 4
+#define PMC_USB_ALTMODE_ORI_HSL_SHIFT 5
+
+/* DP specific Mode Data bits */
+#define PMC_USB_ALTMODE_DP_MODE_SHIFT 8
+
+/* TBT specific Mode Data bits */
+#define PMC_USB_ALTMODE_TBT_TYPE BIT(17)
+#define PMC_USB_ALTMODE_CABLE_TYPE BIT(18)
+#define PMC_USB_ALTMODE_ACTIVE_LINK BIT(20)
+#define PMC_USB_ALTMODE_FORCE_LSR BIT(23)
+#define PMC_USB_ALTMODE_CABLE_SPD(_s_) (((_s_) & GENMASK(2, 0)) << 25)
+#define PMC_USB_ALTMODE_CABLE_USB31 1
+#define PMC_USB_ALTMODE_CABLE_10GPS 2
+#define PMC_USB_ALTMODE_CABLE_20GPS 3
+#define PMC_USB_ALTMODE_TBT_GEN(_g_) (((_g_) & GENMASK(1, 0)) << 28)
+
+/* Display HPD Request bits */
+#define PMC_USB_DP_HPD_IRQ BIT(5)
+#define PMC_USB_DP_HPD_LVL BIT(6)
+
+struct pmc_usb;
+
+struct pmc_usb_port {
+ int num;
+ struct pmc_usb *pmc;
+ struct typec_mux *typec_mux;
+ struct typec_switch *typec_sw;
+ struct usb_role_switch *usb_sw;
+
+ enum typec_orientation orientation;
+ enum usb_role role;
+
+ u8 usb2_port;
+ u8 usb3_port;
+};
+
+struct pmc_usb {
+ u8 num_ports;
+ struct device *dev;
+ struct pmc_usb_port *port;
+};
+
+static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len)
+{
+ u8 response[4];
+
+ /*
+ * Error bit will always be 0 with the USBC command.
+ * Status can be checked from the response message.
+ */
+ intel_pmc_ipc_command(PMC_USBC_CMD, 0, msg, len,
+ (void *)response, 1);
+
+ if (response[2]) {
+ if (response[2] & BIT(1))
+ return -EIO;
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static int
+pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_mux_state *state)
+{
+ struct typec_displayport_data *data = state->data;
+ u8 msg[2] = { };
+
+ msg[0] = PMC_USB_DP_HPD;
+ msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
+
+ msg[1] = PMC_USB_DP_HPD_IRQ;
+
+ if (data->status & DP_STATUS_HPD_STATE)
+ msg[1] |= PMC_USB_DP_HPD_LVL;
+
+ return pmc_usb_command(port, msg, sizeof(msg));
+}
+
+static int
+pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
+{
+ struct typec_displayport_data *data = state->data;
+ struct altmode_req req = { };
+
+ if (data->status & DP_STATUS_IRQ_HPD)
+ return pmc_usb_mux_dp_hpd(port, state);
+
+ req.usage = PMC_USB_ALT_MODE;
+ req.usage |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
+ req.mode_type = PMC_USB_MODE_TYPE_DP << PMC_USB_MODE_TYPE_SHIFT;
+
+ req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
+ req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
+ req.mode_data |= (port->orientation - 1) << PMC_USB_ALTMODE_ORI_AUX_SHIFT;
+ req.mode_data |= (port->orientation - 1) << PMC_USB_ALTMODE_ORI_HSL_SHIFT;
+
+ req.mode_data |= (state->mode - TYPEC_STATE_MODAL) <<
+ PMC_USB_ALTMODE_DP_MODE_SHIFT;
+
+ return pmc_usb_command(port, (void *)&req, sizeof(req));
+}
+
+static int
+pmc_usb_mux_tbt(struct pmc_usb_port *port, struct typec_mux_state *state)
+{
+ struct typec_thunderbolt_data *data = state->data;
+ u8 cable_speed = TBT_CABLE_SPEED(data->cable_mode);
+ struct altmode_req req = { };
+
+ req.usage = PMC_USB_ALT_MODE;
+ req.usage |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
+ req.mode_type = PMC_USB_MODE_TYPE_TBT << PMC_USB_MODE_TYPE_SHIFT;
+
+ req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
+ req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
+ req.mode_data |= (port->orientation - 1) << PMC_USB_ALTMODE_ORI_AUX_SHIFT;
+ req.mode_data |= (port->orientation - 1) << PMC_USB_ALTMODE_ORI_HSL_SHIFT;
+
+ if (TBT_ADAPTER(data->device_mode) == TBT_ADAPTER_TBT3)
+ req.mode_data |= PMC_USB_ALTMODE_TBT_TYPE;
+
+ if (data->cable_mode & TBT_CABLE_OPTICAL)
+ req.mode_data |= PMC_USB_ALTMODE_CABLE_TYPE;
+
+ if (data->cable_mode & TBT_CABLE_LINK_TRAINING)
+ req.mode_data |= PMC_USB_ALTMODE_ACTIVE_LINK;
+
+ if (data->enter_vdo & TBT_ENTER_MODE_ACTIVE_CABLE)
+ req.mode_data |= PMC_USB_ALTMODE_ACTIVE_CABLE;
+
+ req.mode_data |= PMC_USB_ALTMODE_CABLE_SPD(cable_speed);
+
+ return pmc_usb_command(port, (void *)&req, sizeof(req));
+}
+
+static int pmc_usb_mux_safe_state(struct pmc_usb_port *port)
+{
+ u8 msg;
+
+ msg = PMC_USB_SAFE_MODE;
+ msg |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
+
+ return pmc_usb_command(port, &msg, sizeof(msg));
+}
+
+static int pmc_usb_connect(struct pmc_usb_port *port)
+{
+ u8 msg[2];
+
+ msg[0] = PMC_USB_CONNECT;
+ msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
+
+ msg[1] = port->usb2_port << PMC_USB_MSG_USB2_PORT_SHIFT;
+ msg[1] |= (port->orientation - 1) << PMC_USB_MSG_ORI_HSL_SHIFT;
+ msg[1] |= (port->orientation - 1) << PMC_USB_MSG_ORI_AUX_SHIFT;
+
+ return pmc_usb_command(port, msg, sizeof(msg));
+}
+
+static int pmc_usb_disconnect(struct pmc_usb_port *port)
+{
+ u8 msg[2];
+
+ msg[0] = PMC_USB_DISCONNECT;
+ msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
+
+ msg[1] = port->usb2_port << PMC_USB_MSG_USB2_PORT_SHIFT;
+
+ return pmc_usb_command(port, msg, sizeof(msg));
+}
+
+static int
+pmc_usb_mux_set(struct typec_mux *mux, struct typec_mux_state *state)
+{
+ struct pmc_usb_port *port = typec_mux_get_drvdata(mux);
+
+ if (!state->alt)
+ return 0;
+
+ if (state->mode == TYPEC_STATE_SAFE)
+ return pmc_usb_mux_safe_state(port);
+
+ switch (state->alt->svid) {
+ case USB_TYPEC_TBT_SID:
+ return pmc_usb_mux_tbt(port, state);
+ case USB_TYPEC_DP_SID:
+ return pmc_usb_mux_dp(port, state);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int pmc_usb_set_orientation(struct typec_switch *sw,
+ enum typec_orientation orientation)
+{
+ struct pmc_usb_port *port = typec_switch_get_drvdata(sw);
+
+ if (port->orientation == orientation)
+ return 0;
+
+ port->orientation = orientation;
+
+ if (port->role) {
+ if (orientation == TYPEC_ORIENTATION_NONE)
+ return pmc_usb_disconnect(port);
+ else
+ return pmc_usb_connect(port);
+ }
+
+ return 0;
+}
+
+static int pmc_usb_set_role(struct usb_role_switch *sw, enum usb_role role)
+{
+ struct pmc_usb_port *port = usb_role_switch_get_drvdata(sw);
+
+ if (port->role == role)
+ return 0;
+
+ port->role = role;
+
+ if (port->orientation) {
+ if (role == USB_ROLE_NONE)
+ return pmc_usb_disconnect(port);
+ else
+ return pmc_usb_connect(port);
+ }
+
+ return 0;
+}
+
+static int pmc_usb_register_port(struct pmc_usb *pmc, int index,
+ struct fwnode_handle *fwnode)
+{
+ struct pmc_usb_port *port = &pmc->port[index];
+ struct usb_role_switch_desc desc = { };
+ struct typec_switch_desc sw_desc = { };
+ struct typec_mux_desc mux_desc = { };
+ int ret;
+
+ ret = fwnode_property_read_u8(fwnode, "usb2-port", &port->usb2_port);
+ if (ret)
+ return ret;
+
+ ret = fwnode_property_read_u8(fwnode, "usb3-port", &port->usb3_port);
+ if (ret)
+ return ret;
+
+ port->num = index;
+ port->pmc = pmc;
+
+ sw_desc.fwnode = fwnode;
+ sw_desc.drvdata = port;
+ sw_desc.name = fwnode_get_name(fwnode);
+ sw_desc.set = pmc_usb_set_orientation;
+
+ port->typec_sw = typec_switch_register(pmc->dev, &sw_desc);
+ if (IS_ERR(port->typec_sw))
+ return PTR_ERR(port->typec_sw);
+
+ mux_desc.fwnode = fwnode;
+ mux_desc.drvdata = port;
+ mux_desc.name = fwnode_get_name(fwnode);
+ mux_desc.set = pmc_usb_mux_set;
+
+ port->typec_mux = typec_mux_register(pmc->dev, &mux_desc);
+ if (IS_ERR(port->typec_mux)) {
+ ret = PTR_ERR(port->typec_mux);
+ goto err_unregister_switch;
+ }
+
+ desc.fwnode = fwnode;
+ desc.driver_data = port;
+ desc.name = fwnode_get_name(fwnode);
+ desc.set = pmc_usb_set_role;
+
+ port->usb_sw = usb_role_switch_register(pmc->dev, &desc);
+ if (IS_ERR(port->usb_sw)) {
+ ret = PTR_ERR(port->usb_sw);
+ goto err_unregister_mux;
+ }
+
+ return 0;
+
+err_unregister_mux:
+ typec_mux_unregister(port->typec_mux);
+
+err_unregister_switch:
+ typec_switch_unregister(port->typec_sw);
+
+ return ret;
+}
+
+static int pmc_usb_probe(struct platform_device *pdev)
+{
+ struct fwnode_handle *fwnode = NULL;
+ struct pmc_usb *pmc;
+ int i = 0;
+ int ret;
+
+ pmc = devm_kzalloc(&pdev->dev, sizeof(*pmc), GFP_KERNEL);
+ if (!pmc)
+ return -ENOMEM;
+
+ device_for_each_child_node(&pdev->dev, fwnode)
+ pmc->num_ports++;
+
+ pmc->port = devm_kcalloc(&pdev->dev, pmc->num_ports,
+ sizeof(struct pmc_usb_port), GFP_KERNEL);
+ if (!pmc->port)
+ return -ENOMEM;
+
+ pmc->dev = &pdev->dev;
+
+ /*
+ * For every physical USB connector (USB2 and USB3 combo) there is a
+ * child ACPI device node under the PMC mux ACPI device object.
+ */
+ for (i = 0; i < pmc->num_ports; i++) {
+ fwnode = device_get_next_child_node(pmc->dev, fwnode);
+ if (!fwnode)
+ break;
+
+ ret = pmc_usb_register_port(pmc, i, fwnode);
+ if (ret)
+ goto err_remove_ports;
+ }
+
+ platform_set_drvdata(pdev, pmc);
+
+ return 0;
+
+err_remove_ports:
+ for (i = 0; i < pmc->num_ports; i++) {
+ typec_switch_unregister(pmc->port[i].typec_sw);
+ typec_mux_unregister(pmc->port[i].typec_mux);
+ }
+
+ return ret;
+}
+
+static int pmc_usb_remove(struct platform_device *pdev)
+{
+ struct pmc_usb *pmc = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < pmc->num_ports; i++) {
+ typec_switch_unregister(pmc->port[i].typec_sw);
+ typec_mux_unregister(pmc->port[i].typec_mux);
+ }
+
+ return 0;
+}
+
+static const struct acpi_device_id pmc_usb_acpi_ids[] = {
+ { "INTC105C", },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, pmc_usb_acpi_ids);
+
+static struct platform_driver pmc_usb_driver = {
+ .driver = {
+ .name = "intel_pmc_usb",
+ .acpi_match_table = ACPI_PTR(pmc_usb_acpi_ids),
+ },
+ .probe = pmc_usb_probe,
+ .remove = pmc_usb_remove,
+};
+
+module_platform_driver(pmc_usb_driver);
+
+MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel PMC USB mux control");
The Intel PMC microcontroller on the latest Intel platforms has a new function that allows configuration of the USB Multiplexer/DeMultiplexer switches that are under the control of the PMC. The Intel PMC mux control (aka. mux-agent) can be used for swapping the USB data role and for entering alternate modes, DisplayPort or Thunderbolt3. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> --- drivers/usb/typec/mux/Kconfig | 9 + drivers/usb/typec/mux/Makefile | 1 + drivers/usb/typec/mux/intel_pmc_mux.c | 434 ++++++++++++++++++++++++++ 3 files changed, 444 insertions(+) create mode 100644 drivers/usb/typec/mux/intel_pmc_mux.c