diff mbox series

[v4,1/6] usb: typec: Add QCOM PMIC typec detection driver

Message ID 20200626185516.18018-2-wcheng@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series Introduce PMIC based USB type C detection | expand

Commit Message

Wesley Cheng June 26, 2020, 6:55 p.m. UTC 
The QCOM SPMI typec driver handles the role and orientation detection, and
notifies client drivers using the USB role switch framework.   It registers
as a typec port, so orientation can be communicated using the typec switch
APIs.  The driver also attains a handle to the VBUS output regulator, so it
can enable/disable the VBUS source when acting as a host/device.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
---
 drivers/usb/typec/Kconfig           |  12 ++
 drivers/usb/typec/Makefile          |   1 +
 drivers/usb/typec/qcom-pmic-typec.c | 275 ++++++++++++++++++++++++++++
 3 files changed, 288 insertions(+)
 create mode 100644 drivers/usb/typec/qcom-pmic-typec.c

Comments

Heikki Krogerus June 29, 2020, 7:22 a.m. UTC | #1 
On Fri, Jun 26, 2020 at 11:55:11AM -0700, Wesley Cheng wrote:
> The QCOM SPMI typec driver handles the role and orientation detection, and
> notifies client drivers using the USB role switch framework.   It registers
> as a typec port, so orientation can be communicated using the typec switch
> APIs.  The driver also attains a handle to the VBUS output regulator, so it
> can enable/disable the VBUS source when acting as a host/device.
> 
> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
>  drivers/usb/typec/Kconfig           |  12 ++
>  drivers/usb/typec/Makefile          |   1 +
>  drivers/usb/typec/qcom-pmic-typec.c | 275 ++++++++++++++++++++++++++++
>  3 files changed, 288 insertions(+)
>  create mode 100644 drivers/usb/typec/qcom-pmic-typec.c
> 
> diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
> index b4f2aac7ae8a..595c14766e99 100644
> --- a/drivers/usb/typec/Kconfig
> +++ b/drivers/usb/typec/Kconfig
> @@ -72,6 +72,18 @@ config TYPEC_TPS6598X
>  	  If you choose to build this driver as a dynamically linked module, the
>  	  module will be called tps6598x.ko.
>  
> +config TYPEC_QCOM_PMIC
> +	tristate "Qualcomm PMIC USB Type-C driver"
> +	depends on ARCH_QCOM
> +	help
> +	  Driver for supporting role switch over the Qualcomm PMIC.  This will
> +	  handle the USB Type-C role and orientation detection reported by the
> +	  QCOM PMIC if the PMIC has the capability to handle USB Type-C
> +	  detection.
> +
> +	  It will also enable the VBUS output to connected devices when a
> +	  DFP connection is made.
> +
>  source "drivers/usb/typec/mux/Kconfig"
>  
>  source "drivers/usb/typec/altmodes/Kconfig"
> diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
> index 7753a5c3cd46..cceffd987643 100644
> --- a/drivers/usb/typec/Makefile
> +++ b/drivers/usb/typec/Makefile
> @@ -6,4 +6,5 @@ obj-$(CONFIG_TYPEC_TCPM)	+= tcpm/
>  obj-$(CONFIG_TYPEC_UCSI)	+= ucsi/
>  obj-$(CONFIG_TYPEC_HD3SS3220)	+= hd3ss3220.o
>  obj-$(CONFIG_TYPEC_TPS6598X)	+= tps6598x.o
> +obj-$(CONFIG_TYPEC_QCOM_PMIC)	+= qcom-pmic-typec.o
>  obj-$(CONFIG_TYPEC)		+= mux/
> diff --git a/drivers/usb/typec/qcom-pmic-typec.c b/drivers/usb/typec/qcom-pmic-typec.c
> new file mode 100644
> index 000000000000..5ae3af03c638
> --- /dev/null
> +++ b/drivers/usb/typec/qcom-pmic-typec.c
> @@ -0,0 +1,275 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/regmap.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_device.h>
> +#include <linux/usb/role.h>
> +#include <linux/usb/typec_mux.h>
> +#include <linux/regulator/consumer.h>
> +
> +#define TYPEC_MISC_STATUS		0xb
> +#define CC_ATTACHED			BIT(0)
> +#define CC_ORIENTATION			BIT(1)
> +#define SNK_SRC_MODE			BIT(6)
> +#define TYPEC_MODE_CFG			0x44
> +#define TYPEC_DISABLE_CMD		BIT(0)
> +#define EN_SNK_ONLY			BIT(1)
> +#define EN_SRC_ONLY			BIT(2)
> +#define TYPEC_VCONN_CONTROL		0x46
> +#define VCONN_EN_SRC			BIT(0)
> +#define VCONN_EN_VAL			BIT(1)
> +#define TYPEC_EXIT_STATE_CFG		0x50
> +#define SEL_SRC_UPPER_REF		BIT(2)
> +#define TYPEC_INTR_EN_CFG_1		0x5e
> +#define TYPEC_INTR_EN_CFG_1_MASK	GENMASK(7, 0)
> +
> +struct qcom_pmic_typec {
> +	struct device		*dev;
> +	struct fwnode_handle	*fwnode;
> +	struct regmap		*regmap;
> +	u32			base;
> +
> +	struct typec_capability *cap;
> +	struct typec_port	*port;
> +	struct usb_role_switch *role_sw;
> +
> +	struct regulator	*vbus_reg;
> +	bool			vbus_enabled;
> +};
> +
> +static void qcom_pmic_typec_enable_vbus_regulator(struct qcom_pmic_typec
> +							*qcom_usb, bool enable)
> +{
> +	int ret = 0;
> +
> +	if (enable == qcom_usb->vbus_enabled)
> +		return;
> +
> +	if (!qcom_usb->vbus_reg) {
> +		qcom_usb->vbus_reg = devm_regulator_get(qcom_usb->dev,
> +							"usb_vbus");
> +		if (IS_ERR(qcom_usb->vbus_reg)) {
> +			qcom_usb->vbus_reg = NULL;
> +			return;
> +		}
> +	}
> +
> +	if (enable) {
> +		ret = regulator_enable(qcom_usb->vbus_reg);
> +		if (ret)
> +			return;
> +	} else {
> +		ret = regulator_disable(qcom_usb->vbus_reg);
> +		if (ret)
> +			return;
> +	}
> +	qcom_usb->vbus_enabled = enable;
> +}
> +
> +static void qcom_pmic_typec_check_connection(struct qcom_pmic_typec *qcom_usb)
> +{
> +	enum typec_orientation orientation;
> +	enum usb_role role;
> +	unsigned int stat;
> +	bool enable_vbus;
> +
> +	regmap_read(qcom_usb->regmap, qcom_usb->base + TYPEC_MISC_STATUS,
> +		    &stat);
> +
> +	if (stat & CC_ATTACHED) {
> +		orientation = ((stat & CC_ORIENTATION) >> 1) ?
> +				TYPEC_ORIENTATION_REVERSE :
> +				TYPEC_ORIENTATION_NORMAL;
> +		typec_set_orientation(qcom_usb->port, orientation);
> +
> +		role = (stat & SNK_SRC_MODE) ? USB_ROLE_HOST : USB_ROLE_DEVICE;
> +		if (role == USB_ROLE_HOST)
> +			enable_vbus = true;
> +		else
> +			enable_vbus = false;
> +	} else {
> +		role = USB_ROLE_NONE;
> +		enable_vbus = false;
> +	}
> +
> +	qcom_pmic_typec_enable_vbus_regulator(qcom_usb, enable_vbus);
> +	usb_role_switch_set_role(qcom_usb->role_sw, role);
> +}
> +
> +static irqreturn_t qcom_pmic_typec_interrupt(int irq, void *_qcom_usb)
> +{
> +	struct qcom_pmic_typec *qcom_usb = _qcom_usb;
> +
> +	qcom_pmic_typec_check_connection(qcom_usb);
> +	return IRQ_HANDLED;
> +}
> +
> +static void qcom_pmic_typec_typec_hw_init(struct qcom_pmic_typec *qcom_usb)
> +{
> +	u8 mode = 0;
> +
> +	regmap_update_bits(qcom_usb->regmap,
> +			   qcom_usb->base + TYPEC_INTR_EN_CFG_1,
> +			   TYPEC_INTR_EN_CFG_1_MASK, 0);
> +
> +	if (qcom_usb->cap->type != TYPEC_PORT_DRP)
> +		mode = (qcom_usb->cap->type == TYPEC_PORT_SNK) ?
> +					EN_SNK_ONLY : EN_SRC_ONLY;
> +	regmap_update_bits(qcom_usb->regmap, qcom_usb->base + TYPEC_MODE_CFG,
> +			   EN_SNK_ONLY | EN_SRC_ONLY, mode);
> +
> +	regmap_update_bits(qcom_usb->regmap,
> +			   qcom_usb->base + TYPEC_VCONN_CONTROL,
> +			   VCONN_EN_SRC | VCONN_EN_VAL, VCONN_EN_SRC);
> +	regmap_update_bits(qcom_usb->regmap,
> +			   qcom_usb->base + TYPEC_EXIT_STATE_CFG,
> +			   SEL_SRC_UPPER_REF, SEL_SRC_UPPER_REF);
> +}
> +
> +static int qcom_pmic_typec_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct qcom_pmic_typec *qcom_usb;
> +	struct typec_capability *cap;
> +	const char *buf;
> +	int ret, irq, role;
> +	u32 reg;
> +
> +	ret = of_property_read_u32(dev->of_node, "reg", &reg);
> +	if (ret < 0) {
> +		dev_err(dev, "missing base address");
> +		return ret;
> +	}
> +
> +	qcom_usb = devm_kzalloc(dev, sizeof(*qcom_usb), GFP_KERNEL);
> +	if (!qcom_usb)
> +		return -ENOMEM;
> +
> +	qcom_usb->dev = dev;
> +	qcom_usb->base = reg;
> +
> +	qcom_usb->regmap = dev_get_regmap(dev->parent, NULL);
> +	if (!qcom_usb->regmap) {
> +		dev_err(dev, "Failed to get regmap\n");
> +		return -EINVAL;
> +	}
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0) {
> +		dev_err(dev, "Failed to get CC irq\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = devm_request_threaded_irq(qcom_usb->dev, irq, NULL,
> +					qcom_pmic_typec_interrupt, IRQF_ONESHOT,
> +					"qcom-pmic-typec", qcom_usb);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Could not request IRQ\n");
> +		return ret;
> +	}
> +
> +	qcom_usb->fwnode = device_get_named_child_node(dev, "connector");
> +	if (!qcom_usb->fwnode)
> +		return -EINVAL;
> +
> +	cap = devm_kzalloc(dev, sizeof(*cap), GFP_KERNEL);
> +	if (!cap) {
> +		ret = -ENOMEM;
> +		goto err_put_node;
> +	}
> +
> +	ret = fwnode_property_read_string(qcom_usb->fwnode, "power-role", &buf);
> +	if (!ret) {
> +		role = typec_find_port_power_role(buf);
> +		if (role < 0)
> +			role = TYPEC_PORT_SNK;
> +	} else {
> +		role = TYPEC_PORT_SNK;
> +	}
> +	cap->type = role;
> +
> +	ret = fwnode_property_read_string(qcom_usb->fwnode, "data-role", &buf);
> +	if (!ret) {
> +		role = typec_find_port_data_role(buf);
> +		if (role < 0)
> +			role = TYPEC_PORT_UFP;
> +	} else {
> +		role = TYPEC_PORT_UFP;
> +	}
> +	cap->data = role;
> +
> +	cap->prefer_role = TYPEC_NO_PREFERRED_ROLE;
> +	cap->fwnode = qcom_usb->fwnode;
> +	qcom_usb->port = typec_register_port(dev, cap);
> +	if (IS_ERR(qcom_usb->port)) {
> +		ret = PTR_ERR(qcom_usb->port);
> +		dev_err(dev, "Failed to register type c port %d\n", ret);
> +		goto err_put_node;
> +	}
> +
> +	qcom_usb->cap = cap;
> +
> +	qcom_usb->role_sw = fwnode_usb_role_switch_get(qcom_usb->fwnode);
> +	if (IS_ERR(qcom_usb->role_sw)) {
> +		if (PTR_ERR(qcom_usb->role_sw) != -EPROBE_DEFER)
> +			dev_err(dev, "failed to get role switch\n");
> +		ret = PTR_ERR(qcom_usb->role_sw);
> +		goto err_typec_port;
> +	}
> +
> +	platform_set_drvdata(pdev, qcom_usb);
> +	qcom_pmic_typec_typec_hw_init(qcom_usb);
> +	qcom_pmic_typec_check_connection(qcom_usb);
> +
> +	return 0;
> +
> +err_typec_port:
> +	typec_unregister_port(qcom_usb->port);
> +err_put_node:
> +	fwnode_handle_put(qcom_usb->fwnode);
> +
> +	return ret;
> +}
> +
> +static int qcom_pmic_typec_remove(struct platform_device *pdev)
> +{
> +	struct qcom_pmic_typec *qcom_usb = platform_get_drvdata(pdev);
> +
> +	usb_role_switch_set_role(qcom_usb->role_sw, USB_ROLE_NONE);
> +	qcom_pmic_typec_enable_vbus_regulator(qcom_usb, 0);
> +
> +	typec_unregister_port(qcom_usb->port);
> +	usb_role_switch_put(qcom_usb->role_sw);
> +	fwnode_handle_put(qcom_usb->fwnode);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id qcom_pmic_typec_table[] = {
> +	{ .compatible = "qcom,pm8150b-usb-typec" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table);
> +
> +static struct platform_driver qcom_pmic_typec = {
> +	.driver = {
> +		.name = "qcom,pmic-typec",
> +		.of_match_table = qcom_pmic_typec_table,
> +	},
> +	.probe = qcom_pmic_typec_probe,
> +	.remove = qcom_pmic_typec_remove,
> +};
> +
> +module_platform_driver(qcom_pmic_typec);
> +
> +MODULE_DESCRIPTION("QCOM PMIC USB type C driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

thanks,
diff mbox series

Patch

diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index b4f2aac7ae8a..595c14766e99 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -72,6 +72,18 @@  config TYPEC_TPS6598X
 	  If you choose to build this driver as a dynamically linked module, the
 	  module will be called tps6598x.ko.
 
+config TYPEC_QCOM_PMIC
+	tristate "Qualcomm PMIC USB Type-C driver"
+	depends on ARCH_QCOM
+	help
+	  Driver for supporting role switch over the Qualcomm PMIC.  This will
+	  handle the USB Type-C role and orientation detection reported by the
+	  QCOM PMIC if the PMIC has the capability to handle USB Type-C
+	  detection.
+
+	  It will also enable the VBUS output to connected devices when a
+	  DFP connection is made.
+
 source "drivers/usb/typec/mux/Kconfig"
 
 source "drivers/usb/typec/altmodes/Kconfig"
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
index 7753a5c3cd46..cceffd987643 100644
--- a/drivers/usb/typec/Makefile
+++ b/drivers/usb/typec/Makefile
@@ -6,4 +6,5 @@  obj-$(CONFIG_TYPEC_TCPM)	+= tcpm/
 obj-$(CONFIG_TYPEC_UCSI)	+= ucsi/
 obj-$(CONFIG_TYPEC_HD3SS3220)	+= hd3ss3220.o
 obj-$(CONFIG_TYPEC_TPS6598X)	+= tps6598x.o
+obj-$(CONFIG_TYPEC_QCOM_PMIC)	+= qcom-pmic-typec.o
 obj-$(CONFIG_TYPEC)		+= mux/
diff --git a/drivers/usb/typec/qcom-pmic-typec.c b/drivers/usb/typec/qcom-pmic-typec.c
new file mode 100644
index 000000000000..5ae3af03c638
--- /dev/null
+++ b/drivers/usb/typec/qcom-pmic-typec.c
@@ -0,0 +1,275 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/regmap.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/usb/role.h>
+#include <linux/usb/typec_mux.h>
+#include <linux/regulator/consumer.h>
+
+#define TYPEC_MISC_STATUS		0xb
+#define CC_ATTACHED			BIT(0)
+#define CC_ORIENTATION			BIT(1)
+#define SNK_SRC_MODE			BIT(6)
+#define TYPEC_MODE_CFG			0x44
+#define TYPEC_DISABLE_CMD		BIT(0)
+#define EN_SNK_ONLY			BIT(1)
+#define EN_SRC_ONLY			BIT(2)
+#define TYPEC_VCONN_CONTROL		0x46
+#define VCONN_EN_SRC			BIT(0)
+#define VCONN_EN_VAL			BIT(1)
+#define TYPEC_EXIT_STATE_CFG		0x50
+#define SEL_SRC_UPPER_REF		BIT(2)
+#define TYPEC_INTR_EN_CFG_1		0x5e
+#define TYPEC_INTR_EN_CFG_1_MASK	GENMASK(7, 0)
+
+struct qcom_pmic_typec {
+	struct device		*dev;
+	struct fwnode_handle	*fwnode;
+	struct regmap		*regmap;
+	u32			base;
+
+	struct typec_capability *cap;
+	struct typec_port	*port;
+	struct usb_role_switch *role_sw;
+
+	struct regulator	*vbus_reg;
+	bool			vbus_enabled;
+};
+
+static void qcom_pmic_typec_enable_vbus_regulator(struct qcom_pmic_typec
+							*qcom_usb, bool enable)
+{
+	int ret = 0;
+
+	if (enable == qcom_usb->vbus_enabled)
+		return;
+
+	if (!qcom_usb->vbus_reg) {
+		qcom_usb->vbus_reg = devm_regulator_get(qcom_usb->dev,
+							"usb_vbus");
+		if (IS_ERR(qcom_usb->vbus_reg)) {
+			qcom_usb->vbus_reg = NULL;
+			return;
+		}
+	}
+
+	if (enable) {
+		ret = regulator_enable(qcom_usb->vbus_reg);
+		if (ret)
+			return;
+	} else {
+		ret = regulator_disable(qcom_usb->vbus_reg);
+		if (ret)
+			return;
+	}
+	qcom_usb->vbus_enabled = enable;
+}
+
+static void qcom_pmic_typec_check_connection(struct qcom_pmic_typec *qcom_usb)
+{
+	enum typec_orientation orientation;
+	enum usb_role role;
+	unsigned int stat;
+	bool enable_vbus;
+
+	regmap_read(qcom_usb->regmap, qcom_usb->base + TYPEC_MISC_STATUS,
+		    &stat);
+
+	if (stat & CC_ATTACHED) {
+		orientation = ((stat & CC_ORIENTATION) >> 1) ?
+				TYPEC_ORIENTATION_REVERSE :
+				TYPEC_ORIENTATION_NORMAL;
+		typec_set_orientation(qcom_usb->port, orientation);
+
+		role = (stat & SNK_SRC_MODE) ? USB_ROLE_HOST : USB_ROLE_DEVICE;
+		if (role == USB_ROLE_HOST)
+			enable_vbus = true;
+		else
+			enable_vbus = false;
+	} else {
+		role = USB_ROLE_NONE;
+		enable_vbus = false;
+	}
+
+	qcom_pmic_typec_enable_vbus_regulator(qcom_usb, enable_vbus);
+	usb_role_switch_set_role(qcom_usb->role_sw, role);
+}
+
+static irqreturn_t qcom_pmic_typec_interrupt(int irq, void *_qcom_usb)
+{
+	struct qcom_pmic_typec *qcom_usb = _qcom_usb;
+
+	qcom_pmic_typec_check_connection(qcom_usb);
+	return IRQ_HANDLED;
+}
+
+static void qcom_pmic_typec_typec_hw_init(struct qcom_pmic_typec *qcom_usb)
+{
+	u8 mode = 0;
+
+	regmap_update_bits(qcom_usb->regmap,
+			   qcom_usb->base + TYPEC_INTR_EN_CFG_1,
+			   TYPEC_INTR_EN_CFG_1_MASK, 0);
+
+	if (qcom_usb->cap->type != TYPEC_PORT_DRP)
+		mode = (qcom_usb->cap->type == TYPEC_PORT_SNK) ?
+					EN_SNK_ONLY : EN_SRC_ONLY;
+	regmap_update_bits(qcom_usb->regmap, qcom_usb->base + TYPEC_MODE_CFG,
+			   EN_SNK_ONLY | EN_SRC_ONLY, mode);
+
+	regmap_update_bits(qcom_usb->regmap,
+			   qcom_usb->base + TYPEC_VCONN_CONTROL,
+			   VCONN_EN_SRC | VCONN_EN_VAL, VCONN_EN_SRC);
+	regmap_update_bits(qcom_usb->regmap,
+			   qcom_usb->base + TYPEC_EXIT_STATE_CFG,
+			   SEL_SRC_UPPER_REF, SEL_SRC_UPPER_REF);
+}
+
+static int qcom_pmic_typec_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct qcom_pmic_typec *qcom_usb;
+	struct typec_capability *cap;
+	const char *buf;
+	int ret, irq, role;
+	u32 reg;
+
+	ret = of_property_read_u32(dev->of_node, "reg", &reg);
+	if (ret < 0) {
+		dev_err(dev, "missing base address");
+		return ret;
+	}
+
+	qcom_usb = devm_kzalloc(dev, sizeof(*qcom_usb), GFP_KERNEL);
+	if (!qcom_usb)
+		return -ENOMEM;
+
+	qcom_usb->dev = dev;
+	qcom_usb->base = reg;
+
+	qcom_usb->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!qcom_usb->regmap) {
+		dev_err(dev, "Failed to get regmap\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "Failed to get CC irq\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_threaded_irq(qcom_usb->dev, irq, NULL,
+					qcom_pmic_typec_interrupt, IRQF_ONESHOT,
+					"qcom-pmic-typec", qcom_usb);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not request IRQ\n");
+		return ret;
+	}
+
+	qcom_usb->fwnode = device_get_named_child_node(dev, "connector");
+	if (!qcom_usb->fwnode)
+		return -EINVAL;
+
+	cap = devm_kzalloc(dev, sizeof(*cap), GFP_KERNEL);
+	if (!cap) {
+		ret = -ENOMEM;
+		goto err_put_node;
+	}
+
+	ret = fwnode_property_read_string(qcom_usb->fwnode, "power-role", &buf);
+	if (!ret) {
+		role = typec_find_port_power_role(buf);
+		if (role < 0)
+			role = TYPEC_PORT_SNK;
+	} else {
+		role = TYPEC_PORT_SNK;
+	}
+	cap->type = role;
+
+	ret = fwnode_property_read_string(qcom_usb->fwnode, "data-role", &buf);
+	if (!ret) {
+		role = typec_find_port_data_role(buf);
+		if (role < 0)
+			role = TYPEC_PORT_UFP;
+	} else {
+		role = TYPEC_PORT_UFP;
+	}
+	cap->data = role;
+
+	cap->prefer_role = TYPEC_NO_PREFERRED_ROLE;
+	cap->fwnode = qcom_usb->fwnode;
+	qcom_usb->port = typec_register_port(dev, cap);
+	if (IS_ERR(qcom_usb->port)) {
+		ret = PTR_ERR(qcom_usb->port);
+		dev_err(dev, "Failed to register type c port %d\n", ret);
+		goto err_put_node;
+	}
+
+	qcom_usb->cap = cap;
+
+	qcom_usb->role_sw = fwnode_usb_role_switch_get(qcom_usb->fwnode);
+	if (IS_ERR(qcom_usb->role_sw)) {
+		if (PTR_ERR(qcom_usb->role_sw) != -EPROBE_DEFER)
+			dev_err(dev, "failed to get role switch\n");
+		ret = PTR_ERR(qcom_usb->role_sw);
+		goto err_typec_port;
+	}
+
+	platform_set_drvdata(pdev, qcom_usb);
+	qcom_pmic_typec_typec_hw_init(qcom_usb);
+	qcom_pmic_typec_check_connection(qcom_usb);
+
+	return 0;
+
+err_typec_port:
+	typec_unregister_port(qcom_usb->port);
+err_put_node:
+	fwnode_handle_put(qcom_usb->fwnode);
+
+	return ret;
+}
+
+static int qcom_pmic_typec_remove(struct platform_device *pdev)
+{
+	struct qcom_pmic_typec *qcom_usb = platform_get_drvdata(pdev);
+
+	usb_role_switch_set_role(qcom_usb->role_sw, USB_ROLE_NONE);
+	qcom_pmic_typec_enable_vbus_regulator(qcom_usb, 0);
+
+	typec_unregister_port(qcom_usb->port);
+	usb_role_switch_put(qcom_usb->role_sw);
+	fwnode_handle_put(qcom_usb->fwnode);
+
+	return 0;
+}
+
+static const struct of_device_id qcom_pmic_typec_table[] = {
+	{ .compatible = "qcom,pm8150b-usb-typec" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table);
+
+static struct platform_driver qcom_pmic_typec = {
+	.driver = {
+		.name = "qcom,pmic-typec",
+		.of_match_table = qcom_pmic_typec_table,
+	},
+	.probe = qcom_pmic_typec_probe,
+	.remove = qcom_pmic_typec_remove,
+};
+
+module_platform_driver(qcom_pmic_typec);
+
+MODULE_DESCRIPTION("QCOM PMIC USB type C driver");
+MODULE_LICENSE("GPL v2");