diff mbox series

[1/2] USB: phy: fsl-usb: remove sysfs abuse

Message ID 20200702072914.1072878-1-gregkh@linuxfoundation.org (mailing list archive)
State Mainlined
Commit cc72a2ca1f2ab075d56fc38ba941c4240968f963
Headers show
Series [1/2] USB: phy: fsl-usb: remove sysfs abuse | expand

Commit Message

Greg KH July 2, 2020, 7:29 a.m. UTC
This file has a HUGE debugging sysfs file that spews out a lot of
information all at once, which violates the one-value-per-file rule for
sysfs.  If this is really needed, it should go into debugfs, but given
the age of this driver, I strongly doubt anyone is using it anymore.

So just remove the file entirely, it was never documented, so obviously,
no one actually needed it :)

Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/phy/phy-fsl-usb.c | 93 -----------------------------------
 1 file changed, 93 deletions(-)

Comments

Peter Chen July 2, 2020, 9:07 a.m. UTC | #1
> 
> This file has a HUGE debugging sysfs file that spews out a lot of information all at
> once, which violates the one-value-per-file rule for sysfs.  If this is really needed, it
> should go into debugfs, but given the age of this driver, I strongly doubt anyone is
> using it anymore.
> 
> So just remove the file entirely, it was never documented, so obviously, no one
> actually needed it :)
> 


Add related people from NXP.

Peter

> Cc: Felipe Balbi <balbi@kernel.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/usb/phy/phy-fsl-usb.c | 93 -----------------------------------
>  1 file changed, 93 deletions(-)
> 
> diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index
> b451f4695f3f..93d2257aeec8 100644
> --- a/drivers/usb/phy/phy-fsl-usb.c
> +++ b/drivers/usb/phy/phy-fsl-usb.c
> @@ -957,98 +957,6 @@ int usb_otg_start(struct platform_device *pdev)
>  	return 0;
>  }
> 
> -/*
> - * state file in sysfs
> - */
> -static ssize_t show_fsl_usb2_otg_state(struct device *dev,
> -				   struct device_attribute *attr, char *buf)
> -{
> -	struct otg_fsm *fsm = &fsl_otg_dev->fsm;
> -	char *next = buf;
> -	unsigned size = PAGE_SIZE;
> -	int t;
> -
> -	mutex_lock(&fsm->lock);
> -
> -	/* basic driver infomation */
> -	t = scnprintf(next, size,
> -			DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n",
> -			DRIVER_VERSION);
> -	size -= t;
> -	next += t;
> -
> -	/* Registers */
> -	t = scnprintf(next, size,
> -			"OTGSC:   0x%08x\n"
> -			"PORTSC:  0x%08x\n"
> -			"USBMODE: 0x%08x\n"
> -			"USBCMD:  0x%08x\n"
> -			"USBSTS:  0x%08x\n"
> -			"USBINTR: 0x%08x\n",
> -			fsl_readl(&usb_dr_regs->otgsc),
> -			fsl_readl(&usb_dr_regs->portsc),
> -			fsl_readl(&usb_dr_regs->usbmode),
> -			fsl_readl(&usb_dr_regs->usbcmd),
> -			fsl_readl(&usb_dr_regs->usbsts),
> -			fsl_readl(&usb_dr_regs->usbintr));
> -	size -= t;
> -	next += t;
> -
> -	/* State */
> -	t = scnprintf(next, size,
> -		      "OTG state: %s\n\n",
> -		      usb_otg_state_string(fsl_otg_dev->phy.otg->state));
> -	size -= t;
> -	next += t;
> -
> -	/* State Machine Variables */
> -	t = scnprintf(next, size,
> -			"a_bus_req: %d\n"
> -			"b_bus_req: %d\n"
> -			"a_bus_resume: %d\n"
> -			"a_bus_suspend: %d\n"
> -			"a_conn: %d\n"
> -			"a_sess_vld: %d\n"
> -			"a_srp_det: %d\n"
> -			"a_vbus_vld: %d\n"
> -			"b_bus_resume: %d\n"
> -			"b_bus_suspend: %d\n"
> -			"b_conn: %d\n"
> -			"b_se0_srp: %d\n"
> -			"b_ssend_srp: %d\n"
> -			"b_sess_vld: %d\n"
> -			"id: %d\n",
> -			fsm->a_bus_req,
> -			fsm->b_bus_req,
> -			fsm->a_bus_resume,
> -			fsm->a_bus_suspend,
> -			fsm->a_conn,
> -			fsm->a_sess_vld,
> -			fsm->a_srp_det,
> -			fsm->a_vbus_vld,
> -			fsm->b_bus_resume,
> -			fsm->b_bus_suspend,
> -			fsm->b_conn,
> -			fsm->b_se0_srp,
> -			fsm->b_ssend_srp,
> -			fsm->b_sess_vld,
> -			fsm->id);
> -	size -= t;
> -	next += t;
> -
> -	mutex_unlock(&fsm->lock);
> -
> -	return PAGE_SIZE - size;
> -}
> -
> -static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state,
> NULL);
> -
> -static struct attribute *fsl_otg_attrs[] = {
> -	&dev_attr_fsl_usb2_otg_state.attr,
> -	NULL,
> -};
> -ATTRIBUTE_GROUPS(fsl_otg);
> -
>  /* Char driver interface to control some OTG input */
> 
>  /*
> @@ -1167,7 +1075,6 @@ struct platform_driver fsl_otg_driver = {
>  	.driver = {
>  		.name = driver_name,
>  		.owner = THIS_MODULE,
> -		.dev_groups = fsl_otg_groups,
>  	},
>  };
> 
> --
> 2.27.0
Ran Wang July 3, 2020, 1:49 a.m. UTC | #2
Hi,

On Thursday, July 2, 2020 5:07 PM, wrote:
> >
> > This file has a HUGE debugging sysfs file that spews out a lot of
> > information all at once, which violates the one-value-per-file rule
> > for sysfs.  If this is really needed, it should go into debugfs, but
> > given the age of this driver, I strongly doubt anyone is using it anymore.
> >
> > So just remove the file entirely, it was never documented, so
> > obviously, no one actually needed it :)
> >
> 
> 
> Add related people from NXP.

Thanks for having me. Agree to clean this up for above reasons.

Regards,
Ran

> Peter
> 
> > Cc: Felipe Balbi <balbi@kernel.org>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > ---
> >  drivers/usb/phy/phy-fsl-usb.c | 93
> > -----------------------------------
> >  1 file changed, 93 deletions(-)
> >
> > diff --git a/drivers/usb/phy/phy-fsl-usb.c
> > b/drivers/usb/phy/phy-fsl-usb.c index
> > b451f4695f3f..93d2257aeec8 100644
> > --- a/drivers/usb/phy/phy-fsl-usb.c
> > +++ b/drivers/usb/phy/phy-fsl-usb.c
> > @@ -957,98 +957,6 @@ int usb_otg_start(struct platform_device *pdev)
> >  	return 0;
> >  }
> >
> > -/*
> > - * state file in sysfs
> > - */
> > -static ssize_t show_fsl_usb2_otg_state(struct device *dev,
> > -				   struct device_attribute *attr, char *buf)
> > -{
> > -	struct otg_fsm *fsm = &fsl_otg_dev->fsm;
> > -	char *next = buf;
> > -	unsigned size = PAGE_SIZE;
> > -	int t;
> > -
> > -	mutex_lock(&fsm->lock);
> > -
> > -	/* basic driver infomation */
> > -	t = scnprintf(next, size,
> > -			DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n",
> > -			DRIVER_VERSION);
> > -	size -= t;
> > -	next += t;
> > -
> > -	/* Registers */
> > -	t = scnprintf(next, size,
> > -			"OTGSC:   0x%08x\n"
> > -			"PORTSC:  0x%08x\n"
> > -			"USBMODE: 0x%08x\n"
> > -			"USBCMD:  0x%08x\n"
> > -			"USBSTS:  0x%08x\n"
> > -			"USBINTR: 0x%08x\n",
> > -			fsl_readl(&usb_dr_regs->otgsc),
> > -			fsl_readl(&usb_dr_regs->portsc),
> > -			fsl_readl(&usb_dr_regs->usbmode),
> > -			fsl_readl(&usb_dr_regs->usbcmd),
> > -			fsl_readl(&usb_dr_regs->usbsts),
> > -			fsl_readl(&usb_dr_regs->usbintr));
> > -	size -= t;
> > -	next += t;
> > -
> > -	/* State */
> > -	t = scnprintf(next, size,
> > -		      "OTG state: %s\n\n",
> > -		      usb_otg_state_string(fsl_otg_dev->phy.otg->state));
> > -	size -= t;
> > -	next += t;
> > -
> > -	/* State Machine Variables */
> > -	t = scnprintf(next, size,
> > -			"a_bus_req: %d\n"
> > -			"b_bus_req: %d\n"
> > -			"a_bus_resume: %d\n"
> > -			"a_bus_suspend: %d\n"
> > -			"a_conn: %d\n"
> > -			"a_sess_vld: %d\n"
> > -			"a_srp_det: %d\n"
> > -			"a_vbus_vld: %d\n"
> > -			"b_bus_resume: %d\n"
> > -			"b_bus_suspend: %d\n"
> > -			"b_conn: %d\n"
> > -			"b_se0_srp: %d\n"
> > -			"b_ssend_srp: %d\n"
> > -			"b_sess_vld: %d\n"
> > -			"id: %d\n",
> > -			fsm->a_bus_req,
> > -			fsm->b_bus_req,
> > -			fsm->a_bus_resume,
> > -			fsm->a_bus_suspend,
> > -			fsm->a_conn,
> > -			fsm->a_sess_vld,
> > -			fsm->a_srp_det,
> > -			fsm->a_vbus_vld,
> > -			fsm->b_bus_resume,
> > -			fsm->b_bus_suspend,
> > -			fsm->b_conn,
> > -			fsm->b_se0_srp,
> > -			fsm->b_ssend_srp,
> > -			fsm->b_sess_vld,
> > -			fsm->id);
> > -	size -= t;
> > -	next += t;
> > -
> > -	mutex_unlock(&fsm->lock);
> > -
> > -	return PAGE_SIZE - size;
> > -}
> > -
> > -static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO,
> > show_fsl_usb2_otg_state, NULL);
> > -
> > -static struct attribute *fsl_otg_attrs[] = {
> > -	&dev_attr_fsl_usb2_otg_state.attr,
> > -	NULL,
> > -};
> > -ATTRIBUTE_GROUPS(fsl_otg);
> > -
> >  /* Char driver interface to control some OTG input */
> >
> >  /*
> > @@ -1167,7 +1075,6 @@ struct platform_driver fsl_otg_driver = {
> >  	.driver = {
> >  		.name = driver_name,
> >  		.owner = THIS_MODULE,
> > -		.dev_groups = fsl_otg_groups,
> >  	},
> >  };
> >
> > --
> > 2.27.0
Felipe Balbi July 23, 2020, 11:40 a.m. UTC | #3
Greg Kroah-Hartman <gregkh@linuxfoundation.org> writes:

> This file has a HUGE debugging sysfs file that spews out a lot of
> information all at once, which violates the one-value-per-file rule for
> sysfs.  If this is really needed, it should go into debugfs, but given
> the age of this driver, I strongly doubt anyone is using it anymore.
>
> So just remove the file entirely, it was never documented, so obviously,
> no one actually needed it :)
>
> Cc: Felipe Balbi <balbi@kernel.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

applied both, thanks Greg.
diff mbox series

Patch

diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index b451f4695f3f..93d2257aeec8 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -957,98 +957,6 @@  int usb_otg_start(struct platform_device *pdev)
 	return 0;
 }
 
-/*
- * state file in sysfs
- */
-static ssize_t show_fsl_usb2_otg_state(struct device *dev,
-				   struct device_attribute *attr, char *buf)
-{
-	struct otg_fsm *fsm = &fsl_otg_dev->fsm;
-	char *next = buf;
-	unsigned size = PAGE_SIZE;
-	int t;
-
-	mutex_lock(&fsm->lock);
-
-	/* basic driver infomation */
-	t = scnprintf(next, size,
-			DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n",
-			DRIVER_VERSION);
-	size -= t;
-	next += t;
-
-	/* Registers */
-	t = scnprintf(next, size,
-			"OTGSC:   0x%08x\n"
-			"PORTSC:  0x%08x\n"
-			"USBMODE: 0x%08x\n"
-			"USBCMD:  0x%08x\n"
-			"USBSTS:  0x%08x\n"
-			"USBINTR: 0x%08x\n",
-			fsl_readl(&usb_dr_regs->otgsc),
-			fsl_readl(&usb_dr_regs->portsc),
-			fsl_readl(&usb_dr_regs->usbmode),
-			fsl_readl(&usb_dr_regs->usbcmd),
-			fsl_readl(&usb_dr_regs->usbsts),
-			fsl_readl(&usb_dr_regs->usbintr));
-	size -= t;
-	next += t;
-
-	/* State */
-	t = scnprintf(next, size,
-		      "OTG state: %s\n\n",
-		      usb_otg_state_string(fsl_otg_dev->phy.otg->state));
-	size -= t;
-	next += t;
-
-	/* State Machine Variables */
-	t = scnprintf(next, size,
-			"a_bus_req: %d\n"
-			"b_bus_req: %d\n"
-			"a_bus_resume: %d\n"
-			"a_bus_suspend: %d\n"
-			"a_conn: %d\n"
-			"a_sess_vld: %d\n"
-			"a_srp_det: %d\n"
-			"a_vbus_vld: %d\n"
-			"b_bus_resume: %d\n"
-			"b_bus_suspend: %d\n"
-			"b_conn: %d\n"
-			"b_se0_srp: %d\n"
-			"b_ssend_srp: %d\n"
-			"b_sess_vld: %d\n"
-			"id: %d\n",
-			fsm->a_bus_req,
-			fsm->b_bus_req,
-			fsm->a_bus_resume,
-			fsm->a_bus_suspend,
-			fsm->a_conn,
-			fsm->a_sess_vld,
-			fsm->a_srp_det,
-			fsm->a_vbus_vld,
-			fsm->b_bus_resume,
-			fsm->b_bus_suspend,
-			fsm->b_conn,
-			fsm->b_se0_srp,
-			fsm->b_ssend_srp,
-			fsm->b_sess_vld,
-			fsm->id);
-	size -= t;
-	next += t;
-
-	mutex_unlock(&fsm->lock);
-
-	return PAGE_SIZE - size;
-}
-
-static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL);
-
-static struct attribute *fsl_otg_attrs[] = {
-	&dev_attr_fsl_usb2_otg_state.attr,
-	NULL,
-};
-ATTRIBUTE_GROUPS(fsl_otg);
-
 /* Char driver interface to control some OTG input */
 
 /*
@@ -1167,7 +1075,6 @@  struct platform_driver fsl_otg_driver = {
 	.driver = {
 		.name = driver_name,
 		.owner = THIS_MODULE,
-		.dev_groups = fsl_otg_groups,
 	},
 };