@@ -165,6 +165,11 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI)
data->ulpi = 1;
+ of_property_read_u32(np, "picophy,pre-emp-curr-control",
+ &data->emp_curr_control);
+ of_property_read_u32(np, "picophy,dc-vol-level-adjust",
+ &data->dc_vol_level_adjust);
+
return data;
}
@@ -25,6 +25,8 @@ struct imx_usbmisc_data {
unsigned int ext_id:1; /* ID from exteranl event */
unsigned int ext_vbus:1; /* Vbus from exteranl event */
struct usb_phy *usb_phy;
+ int emp_curr_control;
+ int dc_vol_level_adjust;
};
int imx_usbmisc_init(struct imx_usbmisc_data *data);
@@ -128,6 +128,12 @@
#define MX7D_USB_OTG_PHY_STATUS_VBUS_VLD BIT(3)
#define MX7D_USB_OTG_PHY_STATUS_CHRGDET BIT(29)
+#define MX7D_USB_OTG_PHY_CFG1 0x30
+#define TXPREEMPAMPTUNE0_BIT 28
+#define TXPREEMPAMPTUNE0_MASK (3 << 28)
+#define TXVREFTUNE0_BIT 20
+#define TXVREFTUNE0_MASK (0xf << 20)
+
#define MX6_USB_OTG_WAKEUP_BITS (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | \
MX6_BM_ID_WAKEUP)
@@ -649,6 +655,21 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID
| MX7D_USBNC_AUTO_RESUME,
usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ /* PHY tuning for signal quality */
+ reg = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
+ if (data->emp_curr_control && data->emp_curr_control <=
+ (TXPREEMPAMPTUNE0_MASK >> TXPREEMPAMPTUNE0_BIT)) {
+ reg &= ~TXPREEMPAMPTUNE0_MASK;
+ reg |= (data->emp_curr_control << TXPREEMPAMPTUNE0_BIT);
+ }
+
+ if (data->dc_vol_level_adjust && data->dc_vol_level_adjust <=
+ (TXVREFTUNE0_MASK >> TXVREFTUNE0_BIT)) {
+ reg &= ~TXVREFTUNE0_MASK;
+ reg |= (data->dc_vol_level_adjust << TXVREFTUNE0_BIT);
+ }
+
+ writel(reg, usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
}
spin_unlock_irqrestore(&usbmisc->lock, flags);
These two parameters are used to improve USB signal for board level, in this commit, we read it from the dtb, and write to related register during the initialization. Signed-off-by: Peter Chen <peter.chen@nxp.com> --- No changes for v2. drivers/usb/chipidea/ci_hdrc_imx.c | 5 +++++ drivers/usb/chipidea/ci_hdrc_imx.h | 2 ++ drivers/usb/chipidea/usbmisc_imx.c | 21 +++++++++++++++++++++ 3 files changed, 28 insertions(+)