| Message ID | 20200717121642.41022-1-jaap.aarts1@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [V2] hwmon: add fan/pwm driver for corsair h100i platinum | expand |
Hi jaap,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on hwmon/hwmon-next]
[also build test WARNING on v5.8-rc5 next-20200717]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/jaap-aarts/hwmon-add-fan-pwm-driver-for-corsair-h100i-platinum/20200717-201923
base: https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
config: h8300-allyesconfig (attached as .config)
compiler: h8300-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=h8300
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
drivers/hwmon/corsair_hydro_i_pro.c: In function 'check_succes':
drivers/hwmon/corsair_hydro_i_pro.c:165:26: warning: left-hand operand of comma expression has no effect [-Wunused-value]
165 | #define SUCCES_CODE (0x12, 0x34)
| ^
drivers/hwmon/corsair_hydro_i_pro.c:170:43: note: in expansion of macro 'SUCCES_CODE'
170 | char success[SUCCES_LENGTH] = { command, SUCCES_CODE };
| ^~~~~~~~~~~
drivers/hwmon/corsair_hydro_i_pro.c: At top level:
>> drivers/hwmon/corsair_hydro_i_pro.c:175:5: warning: no previous prototype for 'set_fan_pwm_curve' [-Wmissing-prototypes]
175 | int set_fan_pwm_curve(struct hydro_i_pro_device *hdev,
| ^~~~~~~~~~~~~~~~~
>> drivers/hwmon/corsair_hydro_i_pro.c:222:5: warning: no previous prototype for 'set_fan_target_rpm' [-Wmissing-prototypes]
222 | int set_fan_target_rpm(struct hydro_i_pro_device *hdev,
| ^~~~~~~~~~~~~~~~~~
>> drivers/hwmon/corsair_hydro_i_pro.c:258:5: warning: no previous prototype for 'get_fan_current_rpm' [-Wmissing-prototypes]
258 | int get_fan_current_rpm(struct hydro_i_pro_device *hdev,
| ^~~~~~~~~~~~~~~~~~~
>> drivers/hwmon/corsair_hydro_i_pro.c:292:5: warning: no previous prototype for 'set_fan_target_pwm' [-Wmissing-prototypes]
292 | int set_fan_target_pwm(struct hydro_i_pro_device *hdev,
| ^~~~~~~~~~~~~~~~~~
>> drivers/hwmon/corsair_hydro_i_pro.c:327:9: warning: no previous prototype for 'hwmon_is_visible' [-Wmissing-prototypes]
327 | umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, u32 attr,
| ^~~~~~~~~~~~~~~~
>> drivers/hwmon/corsair_hydro_i_pro.c:481:5: warning: no previous prototype for 'hwmon_read' [-Wmissing-prototypes]
481 | int hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
| ^~~~~~~~~~
>> drivers/hwmon/corsair_hydro_i_pro.c:561:6: warning: no previous prototype for 'does_fan_exist' [-Wmissing-prototypes]
561 | bool does_fan_exist(struct hydro_i_pro_device *hdev, int channel)
| ^~~~~~~~~~~~~~
>> drivers/hwmon/corsair_hydro_i_pro.c:589:5: warning: no previous prototype for 'get_fan_count' [-Wmissing-prototypes]
589 | int get_fan_count(struct hydro_i_pro_device *hdev)
| ^~~~~~~~~~~~~
>> drivers/hwmon/corsair_hydro_i_pro.c:598:6: warning: no previous prototype for 'hwmon_init' [-Wmissing-prototypes]
598 | void hwmon_init(struct hydro_i_pro_device *hdev)
| ^~~~~~~~~~
drivers/hwmon/corsair_hydro_i_pro.c: In function 'hwmon_init':
>> drivers/hwmon/corsair_hydro_i_pro.c:601:17: warning: variable 'hwmon_dev' set but not used [-Wunused-but-set-variable]
601 | struct device *hwmon_dev;
| ^~~~~~~~~
drivers/hwmon/corsair_hydro_i_pro.c: At top level:
>> drivers/hwmon/corsair_hydro_i_pro.c:671:5: warning: no previous prototype for 'init_device' [-Wmissing-prototypes]
671 | int init_device(struct usb_device *udev)
| ^~~~~~~~~~~
drivers/hwmon/corsair_hydro_i_pro.c: In function 'init_device':
>> drivers/hwmon/corsair_hydro_i_pro.c:681:3: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
681 | ;
| ^
drivers/hwmon/corsair_hydro_i_pro.c: At top level:
>> drivers/hwmon/corsair_hydro_i_pro.c:688:5: warning: no previous prototype for 'deinit_device' [-Wmissing-prototypes]
688 | int deinit_device(struct usb_device *udev)
| ^~~~~~~~~~~~~
drivers/hwmon/corsair_hydro_i_pro.c:166:19: warning: 'SUCCESS' defined but not used [-Wunused-const-variable=]
166 | static const char SUCCESS[SUCCES_LENGTH - 1] = { 0x12, 0x34 };
| ^~~~~~~
vim +/set_fan_pwm_curve +175 drivers/hwmon/corsair_hydro_i_pro.c
174
> 175 int set_fan_pwm_curve(struct hydro_i_pro_device *hdev,
176 struct hwmon_fan_data *fan_data,
177 struct curve_point point[7])
178 {
179 int retval;
180 int wrote;
181 int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr);
182 int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr);
183 unsigned char *send_buf = hdev->bulk_out_buffer;
184 unsigned char *recv_buf = hdev->bulk_in_buffer;
185
186 memcpy(fan_data->curve, point, sizeof(fan_data->curve));
187
188 send_buf[0] = PWM_FAN_CURVE_CMD;
189 send_buf[1] = fan_data->fan_channel;
190 send_buf[2] = point[0].temp;
191 send_buf[3] = point[1].temp;
192 send_buf[4] = point[2].temp;
193 send_buf[5] = point[3].temp;
194 send_buf[6] = point[4].temp;
195 send_buf[7] = point[5].temp;
196 send_buf[8] = point[6].temp;
197 send_buf[9] = point[0].pwm;
198 send_buf[10] = point[1].pwm;
199 send_buf[11] = point[2].pwm;
200 send_buf[12] = point[3].pwm;
201 send_buf[13] = point[4].pwm;
202 send_buf[14] = point[5].pwm;
203 send_buf[15] = point[6].pwm;
204
205 retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 16, &wrote, 100);
206 if (retval != 0)
207 return retval;
208
209 retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 4, &wrote, 100);
210 if (retval != 0)
211 return retval;
212
213 if (!check_succes(send_buf[0], recv_buf)) {
214 dev_info(&hdev->udev->dev,
215 "[*] failed setting fan curve %d,%d,%d/%d\n",
216 recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
217 return -EINVAL;
218 }
219 return 0;
220 }
221
> 222 int set_fan_target_rpm(struct hydro_i_pro_device *hdev,
223 struct hwmon_fan_data *fan_data, long val)
224 {
225 int retval;
226 int wrote;
227 int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr);
228 int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr);
229
230 unsigned char *send_buf = hdev->bulk_out_buffer;
231 unsigned char *recv_buf = hdev->bulk_in_buffer;
232
233 fan_data->fan_target = val;
234 fan_data->fan_pwm_target = 0;
235
236 send_buf[0] = RPM_FAN_TARGET_CMD;
237 send_buf[1] = fan_data->fan_channel;
238 send_buf[2] = (fan_data->fan_target >> 8);
239 send_buf[3] = fan_data->fan_target;
240
241 retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100);
242 if (retval != 0)
243 return retval;
244
245 retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100);
246 if (retval != 0)
247 return retval;
248
249 if (!check_succes(send_buf[0], recv_buf)) {
250 dev_info(&hdev->udev->dev,
251 "[*] failed setting fan rpm %d,%d,%d/%d\n",
252 recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
253 return -EINVAL;
254 }
255 return 0;
256 }
257
> 258 int get_fan_current_rpm(struct hydro_i_pro_device *hdev,
259 struct hwmon_fan_data *fan_data, long *val)
260 {
261 int retval;
262 int wrote;
263 int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr);
264 int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr);
265
266 unsigned char *send_buf = hdev->bulk_out_buffer;
267 unsigned char *recv_buf = hdev->bulk_in_buffer;
268
269 send_buf[0] = PWM_GET_CURRENT_CMD;
270 send_buf[1] = fan_data->fan_channel;
271
272 retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 2, &wrote, 100);
273 if (retval != 0)
274 return retval;
275
276 retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100);
277 if (retval != 0)
278 return retval;
279
280 if (!check_succes(send_buf[0], recv_buf) ||
281 recv_buf[3] != fan_data->fan_channel) {
282 dev_info(&hdev->udev->dev,
283 "[*] failed retrieving fan rmp %d,%d,%d/%d\n",
284 recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
285 return -EINVAL;
286 }
287
288 *val = ((recv_buf[4]) << 8) + recv_buf[5];
289 return 0;
290 }
291
> 292 int set_fan_target_pwm(struct hydro_i_pro_device *hdev,
293 struct hwmon_fan_data *fan_data, long val)
294 {
295 int retval;
296 int wrote;
297 int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr);
298 int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr);
299
300 unsigned char *send_buf = hdev->bulk_out_buffer;
301 unsigned char *recv_buf = hdev->bulk_in_buffer;
302
303 fan_data->fan_pwm_target = val;
304 fan_data->fan_target = 0;
305
306 send_buf[0] = PWM_FAN_TARGET_CMD;
307 send_buf[1] = fan_data->fan_channel;
308 send_buf[3] = fan_data->fan_pwm_target;
309
310 retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100);
311 if (retval != 0)
312 return retval;
313
314 retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000);
315 if (retval != 0)
316 return retval;
317
318 if (!check_succes(send_buf[0], recv_buf)) {
319 dev_info(&hdev->udev->dev,
320 "[*] failed setting fan pwm %d,%d,%d/%d\n",
321 recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
322 return -EINVAL;
323 }
324 return 0;
325 }
326
> 327 umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, u32 attr,
328 int channel)
329 {
330 switch (type) {
331 case hwmon_fan:
332 switch (attr) {
333 case hwmon_fan_input:
334 return 0444;
335 break;
336 case hwmon_fan_target:
337 return 0644;
338 break;
339 case hwmon_fan_min:
340 return 0444;
341 break;
342 default:
343 break;
344 }
345 break;
346 case hwmon_pwm:
347 switch (attr) {
348 case hwmon_pwm_input:
349 return 0200;
350 break;
351 case hwmon_pwm_enable:
352 return 0644;
353 break;
354 default:
355 break;
356 }
357 break;
358 default:
359 break;
360 }
361 return 0;
362 }
363
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
On 7/17/20 5:16 AM, jaap aarts wrote: > Adds fan/pwm support for H100i platinum. > Custom temp/fan curves are not supported, however > the presets found in the proprietary drivers are available. > > Signed-off-by: Jaap Aarts <jaap.aarts1@gmail.com> Most of my comments have not been addressed. Change log is missing. 0-day feedback has not been adressed. Guenter > --- > drivers/hwmon/Kconfig | 6 + > drivers/hwmon/Makefile | 1 + > drivers/hwmon/corsair_hydro_i_pro.c | 791 ++++++++++++++++++++++++++++ > 3 files changed, 798 insertions(+) > create mode 100644 drivers/hwmon/corsair_hydro_i_pro.c > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 288ae9f63588..9831a40fb05f 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -378,6 +378,12 @@ config SENSORS_ARM_SCPI > and power sensors available on ARM Ltd's SCP based platforms. The > actual number and type of sensors exported depend on the platform. > > +config SENSORS_CORSAIR_HYDRO_I_PRO > + tristate "Corsair hydro HXXXi pro driver" > + help > + If you say yes here you get support for the corsair hydro HXXXi pro > + range of devices. > + > config SENSORS_ASB100 > tristate "Asus ASB100 Bach" > depends on X86 && I2C > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index 3e32c21f5efe..ec63294b3ef1 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -20,6 +20,7 @@ obj-$(CONFIG_SENSORS_W83793) += w83793.o > obj-$(CONFIG_SENSORS_W83795) += w83795.o > obj-$(CONFIG_SENSORS_W83781D) += w83781d.o > obj-$(CONFIG_SENSORS_W83791D) += w83791d.o > +obj-$(CONFIG_SENSORS_CORSAIR_HYDRO_I_PRO) += corsair_hydro_i_pro.o > > obj-$(CONFIG_SENSORS_AB8500) += abx500.o ab8500.o > obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o > diff --git a/drivers/hwmon/corsair_hydro_i_pro.c b/drivers/hwmon/corsair_hydro_i_pro.c > new file mode 100644 > index 000000000000..43bf52d8d365 > --- /dev/null > +++ b/drivers/hwmon/corsair_hydro_i_pro.c > @@ -0,0 +1,791 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * A hwmon driver for all corsair hyxro HXXXi pro all-in-one liquid coolers. > + * Copyright (c) Jaap Aarts 2020 > + * > + * Protocol reverse engineered by audiohacked > + * https://github.com/audiohacked/OpendriverLink > + */ > + > +/* > + * Supports following liquid coolers: > + * H100i platinum > + * > + * Other products should work with this driver but no testing has been done. > + * > + * Note: platinum is the codename name for pro within the driver, so H100i platinum = H100i pro. > + * But some products are actually calles platinum, these are not intended to be supported. > + * > + * Note: fan curve control has not been implemented > + */ > +#include <linux/errno.h> > +#include <linux/hwmon.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/slab.h> > +#include <linux/usb.h> > + > +struct hydro_i_pro_device { > + struct usb_device *udev; > + > + unsigned char *bulk_out_buffer; > + char *bulk_in_buffer; > + size_t bulk_out_size; > + size_t bulk_in_size; > + char bulk_in_endpointAddr; > + char bulk_out_endpointAddr; > + > + struct usb_interface *interface; /* the interface for this device */ > + struct semaphore > + limit_sem; /* limiting the number of writes in progress */ > +}; > + > +struct curve_point { > + uint8_t temp; > + uint8_t pwm; > +}; > + > +struct hwmon_fan_data { > + char fan_channel; > + long fan_target; > + unsigned char fan_pwm_target; > + long mode; > + struct curve_point curve[7]; > +}; > + > +struct hwmon_data { > + struct hydro_i_pro_device *hdev; > + int channel_count; > + void **channel_data; > +}; > + > +struct curve_point quiet_curve[] = { > + { > + .temp = 0x1F, > + .pwm = 0x15, > + }, > + { > + .temp = 0x21, > + .pwm = 0x1E, > + }, > + { > + .temp = 0x24, > + .pwm = 0x25, > + }, > + { > + .temp = 0x27, > + .pwm = 0x2D, > + }, > + { > + .temp = 0x29, > + .pwm = 0x38, > + }, > + { > + .temp = 0x2C, > + .pwm = 0x4A, > + }, > + { > + .temp = 0x2F, > + .pwm = 0x64, > + }, > +}; > + > +struct curve_point balanced_curve[] = { > + { > + .temp = 0x1C, > + .pwm = 0x15, > + }, > + { > + .temp = 0x1E, > + .pwm = 0x1B, > + }, > + { > + .temp = 0x20, > + .pwm = 0x23, > + }, > + { > + .temp = 0x22, > + .pwm = 0x28, > + }, > + { > + .temp = 0x24, > + .pwm = 0x32, > + }, > + { > + .temp = 0x27, > + .pwm = 0x48, > + }, > + { > + .temp = 0x29, > + .pwm = 0x64, > + }, > +}; > + > +struct curve_point extreme_curve[] = { > + { > + .temp = 0x19, > + .pwm = 0x28, > + }, > + { > + .temp = 0x1B, > + .pwm = 0x2E, > + }, > + { > + .temp = 0x1D, > + .pwm = 0x37, > + }, > + { > + .temp = 0x1E, > + .pwm = 0x41, > + }, > + { > + .temp = 0x1F, > + .pwm = 0x4C, > + }, > + { > + .temp = 0x20, > + .pwm = 0x56, > + }, > + { > + .temp = 0x21, > + .pwm = 0x64, > + }, > +}; > + > +#define default_curve quiet_curve > + > +enum opcodes { > + PWM_FAN_CURVE_CMD = 0x40, > + PWM_GET_CURRENT_CMD = 0x41, > + PWM_FAN_TARGET_CMD = 0x42, > + RPM_FAN_TARGET_CMD = 0x43, > +}; > + > +#define SUCCES_LENGTH 3 > +#define SUCCES_CODE (0x12, 0x34) > +static const char SUCCESS[SUCCES_LENGTH - 1] = { 0x12, 0x34 }; > + > +static bool check_succes(enum opcodes command, char ret[SUCCES_LENGTH]) > +{ > + char success[SUCCES_LENGTH] = { command, SUCCES_CODE }; > + > + return strncmp(ret, success, SUCCES_LENGTH) == 0; > +} > + > +int set_fan_pwm_curve(struct hydro_i_pro_device *hdev, > + struct hwmon_fan_data *fan_data, > + struct curve_point point[7]) > +{ > + int retval; > + int wrote; > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > + unsigned char *send_buf = hdev->bulk_out_buffer; > + unsigned char *recv_buf = hdev->bulk_in_buffer; > + > + memcpy(fan_data->curve, point, sizeof(fan_data->curve)); > + > + send_buf[0] = PWM_FAN_CURVE_CMD; > + send_buf[1] = fan_data->fan_channel; > + send_buf[2] = point[0].temp; > + send_buf[3] = point[1].temp; > + send_buf[4] = point[2].temp; > + send_buf[5] = point[3].temp; > + send_buf[6] = point[4].temp; > + send_buf[7] = point[5].temp; > + send_buf[8] = point[6].temp; > + send_buf[9] = point[0].pwm; > + send_buf[10] = point[1].pwm; > + send_buf[11] = point[2].pwm; > + send_buf[12] = point[3].pwm; > + send_buf[13] = point[4].pwm; > + send_buf[14] = point[5].pwm; > + send_buf[15] = point[6].pwm; > + > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 16, &wrote, 100); > + if (retval != 0) > + return retval; > + > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 4, &wrote, 100); > + if (retval != 0) > + return retval; > + > + if (!check_succes(send_buf[0], recv_buf)) { > + dev_info(&hdev->udev->dev, > + "[*] failed setting fan curve %d,%d,%d/%d\n", > + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > + return -EINVAL; > + } > + return 0; > +} > + > +int set_fan_target_rpm(struct hydro_i_pro_device *hdev, > + struct hwmon_fan_data *fan_data, long val) > +{ > + int retval; > + int wrote; > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > + > + unsigned char *send_buf = hdev->bulk_out_buffer; > + unsigned char *recv_buf = hdev->bulk_in_buffer; > + > + fan_data->fan_target = val; > + fan_data->fan_pwm_target = 0; > + > + send_buf[0] = RPM_FAN_TARGET_CMD; > + send_buf[1] = fan_data->fan_channel; > + send_buf[2] = (fan_data->fan_target >> 8); > + send_buf[3] = fan_data->fan_target; > + > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > + if (retval != 0) > + return retval; > + > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100); > + if (retval != 0) > + return retval; > + > + if (!check_succes(send_buf[0], recv_buf)) { > + dev_info(&hdev->udev->dev, > + "[*] failed setting fan rpm %d,%d,%d/%d\n", > + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > + return -EINVAL; > + } > + return 0; > +} > + > +int get_fan_current_rpm(struct hydro_i_pro_device *hdev, > + struct hwmon_fan_data *fan_data, long *val) > +{ > + int retval; > + int wrote; > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > + > + unsigned char *send_buf = hdev->bulk_out_buffer; > + unsigned char *recv_buf = hdev->bulk_in_buffer; > + > + send_buf[0] = PWM_GET_CURRENT_CMD; > + send_buf[1] = fan_data->fan_channel; > + > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 2, &wrote, 100); > + if (retval != 0) > + return retval; > + > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100); > + if (retval != 0) > + return retval; > + > + if (!check_succes(send_buf[0], recv_buf) || > + recv_buf[3] != fan_data->fan_channel) { > + dev_info(&hdev->udev->dev, > + "[*] failed retrieving fan rmp %d,%d,%d/%d\n", > + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > + return -EINVAL; > + } > + > + *val = ((recv_buf[4]) << 8) + recv_buf[5]; > + return 0; > +} > + > +int set_fan_target_pwm(struct hydro_i_pro_device *hdev, > + struct hwmon_fan_data *fan_data, long val) > +{ > + int retval; > + int wrote; > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > + > + unsigned char *send_buf = hdev->bulk_out_buffer; > + unsigned char *recv_buf = hdev->bulk_in_buffer; > + > + fan_data->fan_pwm_target = val; > + fan_data->fan_target = 0; > + > + send_buf[0] = PWM_FAN_TARGET_CMD; > + send_buf[1] = fan_data->fan_channel; > + send_buf[3] = fan_data->fan_pwm_target; > + > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > + if (retval != 0) > + return retval; > + > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000); > + if (retval != 0) > + return retval; > + > + if (!check_succes(send_buf[0], recv_buf)) { > + dev_info(&hdev->udev->dev, > + "[*] failed setting fan pwm %d,%d,%d/%d\n", > + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > + return -EINVAL; > + } > + return 0; > +} > + > +umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, u32 attr, > + int channel) > +{ > + switch (type) { > + case hwmon_fan: > + switch (attr) { > + case hwmon_fan_input: > + return 0444; > + break; > + case hwmon_fan_target: > + return 0644; > + break; > + case hwmon_fan_min: > + return 0444; > + break; > + default: > + break; > + } > + break; > + case hwmon_pwm: > + switch (attr) { > + case hwmon_pwm_input: > + return 0200; > + break; > + case hwmon_pwm_enable: > + return 0644; > + break; > + default: > + break; > + } > + break; > + default: > + break; > + } > + return 0; > +} > + > +static int hwmon_write(struct device *dev, enum hwmon_sensor_types type, > + u32 attr, int channel, long val) > +{ > + struct hwmon_data *data = dev_get_drvdata(dev); > + struct hydro_i_pro_device *hdev = data->hdev; > + struct hwmon_fan_data *fan_data; > + int retval = 0; > + > + switch (type) { > + case hwmon_fan: > + switch (attr) { > + case hwmon_fan_target: > + fan_data = data->channel_data[channel]; > + if (fan_data->mode != 1) > + return -EINVAL; > + > + retval = usb_autopm_get_interface(hdev->interface); > + if (retval) > + goto exit; > + > + if (down_trylock(&hdev->limit_sem)) { > + retval = -EAGAIN; > + goto cleanup_interface; > + } > + > + retval = set_fan_target_rpm(hdev, fan_data, val); > + if (retval) > + goto cleanup; > + > + break; > + default: > + return -EINVAL; > + } > + goto exit; > + case hwmon_pwm: > + switch (attr) { > + case hwmon_pwm_input: > + fan_data = data->channel_data[channel]; > + if (fan_data->mode != 1) > + return -EINVAL; > + > + retval = usb_autopm_get_interface(hdev->interface); > + if (retval) > + goto exit; > + > + if (down_trylock(&hdev->limit_sem)) { > + retval = -EAGAIN; > + goto cleanup_interface; > + } > + > + retval = set_fan_target_pwm(hdev, fan_data, val); > + if (retval) > + goto cleanup; > + > + break; > + case hwmon_pwm_enable: > + fan_data = data->channel_data[channel]; > + > + retval = usb_autopm_get_interface(hdev->interface); > + if (retval) > + goto exit; > + > + if (down_trylock(&hdev->limit_sem)) { > + retval = -EAGAIN; > + goto cleanup_interface; > + } > + fan_data->mode = val; > + > + switch (val) { > + case 0: > + set_fan_pwm_curve(hdev, fan_data, > + default_curve); > + break; > + case 1: > + if (fan_data->fan_target != 0) { > + retval = set_fan_target_rpm( > + hdev, fan_data, > + fan_data->fan_target); > + if (retval) > + goto cleanup; > + } else if (fan_data->fan_pwm_target != 0) { > + retval = set_fan_target_pwm( > + hdev, fan_data, > + fan_data->fan_pwm_target); > + if (retval) > + goto cleanup; > + } > + break; > + case 2: > + set_fan_pwm_curve(hdev, fan_data, quiet_curve); > + break; > + case 3: > + set_fan_pwm_curve(hdev, fan_data, > + balanced_curve); > + break; > + case 4: > + set_fan_pwm_curve(hdev, fan_data, > + extreme_curve); > + break; > + } > + break; > + default: > + return -EINVAL; > + } > + goto exit; > + default: > + return -EINVAL; > + } > + > +cleanup: > + up(&hdev->limit_sem); > +cleanup_interface: > + usb_autopm_put_interface(hdev->interface); > +exit: > + return retval; > +} > + > +int hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, > + int channel, long *val) > +{ > + struct hwmon_data *data = dev_get_drvdata(dev); > + struct hydro_i_pro_device *hdev = data->hdev; > + struct hwmon_fan_data *fan_data; > + int retval = 0; > + > + if (channel >= data->channel_count) > + return -EAGAIN; > + > + switch (type) { > + case hwmon_fan: > + switch (attr) { > + case hwmon_fan_input: > + fan_data = data->channel_data[channel]; > + > + retval = usb_autopm_get_interface(hdev->interface); > + if (retval) > + goto exit; > + > + if (down_trylock(&hdev->limit_sem)) { > + retval = -EAGAIN; > + goto cleanup_interface; > + } > + > + retval = get_fan_current_rpm(hdev, fan_data, val); > + if (retval) > + goto cleanup; > + > + goto cleanup; > + case hwmon_fan_target: > + fan_data = data->channel_data[channel]; > + if (fan_data->mode != 1) { > + *val = 0; > + goto exit; > + } > + *val = fan_data->fan_target; > + goto exit; > + case hwmon_fan_min: > + *val = 200; > + goto exit; > + > + default: > + return -EINVAL; > + } > + goto exit; > + > + case hwmon_pwm: > + switch (attr) { > + case hwmon_pwm_enable: > + fan_data = data->channel_data[channel]; > + *val = fan_data->mode; > + goto exit; > + default: > + return -EINVAL; > + } > + goto exit; > + > + default: > + return -EINVAL; > + } > + > +cleanup: > + up(&hdev->limit_sem); > +cleanup_interface: > + usb_autopm_put_interface(hdev->interface); > +exit: > + return retval; > +} > + > +#define fan_config (HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN) > +#define pwm_config (HWMON_PWM_INPUT | HWMON_PWM_ENABLE) > + > +static const struct hwmon_ops i_pro_ops = { > + .is_visible = hwmon_is_visible, > + .read = hwmon_read, > + .write = hwmon_write, > +}; > + > +bool does_fan_exist(struct hydro_i_pro_device *hdev, int channel) > +{ > + int retval; > + int wrote; > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > + > + unsigned char *send_buf = hdev->bulk_out_buffer; > + unsigned char *recv_buf = hdev->bulk_in_buffer; > + > + send_buf[0] = RPM_FAN_TARGET_CMD; > + send_buf[1] = channel; > + send_buf[2] = (600 >> 8); > + send_buf[3] = (unsigned char)600; > + > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > + if (retval != 0) > + return false; > + > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000); > + if (retval != 0) > + return false; > + > + if (!check_succes(send_buf[0], recv_buf)) > + return false; > + return true; > +} > + > +int get_fan_count(struct hydro_i_pro_device *hdev) > +{ > + int fan; > + > + for (fan = 0; does_fan_exist(hdev, fan); fan += 1) > + ; > + return fan; > +} > + > +void hwmon_init(struct hydro_i_pro_device *hdev) > +{ > + int fan_id; > + struct device *hwmon_dev; > + struct hwmon_fan_data *fan; > + struct hwmon_data *data = devm_kzalloc( > + &hdev->udev->dev, sizeof(struct hwmon_data), GFP_KERNEL); > + struct hwmon_chip_info *hwmon_info = devm_kzalloc( > + &hdev->udev->dev, sizeof(struct hwmon_chip_info), GFP_KERNEL); > + //Allocate the info table > + struct hwmon_channel_info **aio_info = > + devm_kzalloc(&hdev->udev->dev, > + sizeof(struct hwmon_channel_info *) * 2, > + GFP_KERNEL); //2 for each channel info. > + > + //Allocate the fan and PWM configuration > + u32 *fans_config = devm_kzalloc(&hdev->udev->dev, > + sizeof(u32) * (data->channel_count + 1), > + GFP_KERNEL); > + u32 *pwms_config = devm_kzalloc(&hdev->udev->dev, > + sizeof(u32) * (data->channel_count + 1), > + GFP_KERNEL); > + > + data->channel_count = get_fan_count(hdev); //amount of fans > + data->channel_data = > + devm_kzalloc(&hdev->udev->dev, > + sizeof(char *) * data->channel_count, GFP_KERNEL); > + > + //For each fan create a data channel a fan config entry and a pwm config entry > + for (fan_id = 0; fan_id <= data->channel_count; fan_id++) { > + fan = devm_kzalloc(&hdev->udev->dev, > + sizeof(struct hwmon_fan_data), GFP_KERNEL); > + fan->fan_channel = fan_id; > + fan->mode = 2; > + data->channel_data[fan_id] = fan; > + fans_config[fan_id] = fan_config; > + pwms_config[fan_id] = pwm_config; > + } > + fans_config[data->channel_count] = 0; > + pwms_config[data->channel_count] = 0; > + > + aio_info[0] = > + devm_kzalloc(&hdev->udev->dev, > + sizeof(struct hwmon_channel_info), GFP_KERNEL); > + aio_info[0]->type = hwmon_fan; > + aio_info[0]->config = fans_config; > + > + aio_info[1] = > + devm_kzalloc(&hdev->udev->dev, > + sizeof(struct hwmon_channel_info), GFP_KERNEL); > + aio_info[1]->type = hwmon_pwm; > + aio_info[1]->config = pwms_config; > + > + hwmon_info->ops = &i_pro_ops; > + hwmon_info->info = (const struct hwmon_channel_info **)aio_info; > + > + data->hdev = hdev; > + hwmon_dev = devm_hwmon_device_register_with_info( > + &hdev->udev->dev, "driver_fan", data, hwmon_info, NULL); > + dev_info(&hdev->udev->dev, "[*] Setup hwmon\n"); > +} > + > +/* > + * Devices that work with this driver. > + * More devices should work, however none have been tested. > + */ > +static const struct usb_device_id astk_table[] = { > + { USB_DEVICE(0x1b1c, 0x0c15) }, > + {}, > +}; > + > +MODULE_DEVICE_TABLE(usb, astk_table); > + > +int init_device(struct usb_device *udev) > +{ > + int retval; > + > + //This is needed because when running windows in a vm with proprietary driver > + //and you switch to this driver, the device will not respond unless you run this. > + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x40, > + 0xffff, 0x0000, 0, 0, 0); > + //this always returns error > + if (retval != 0) > + ; > + > + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, > + 0x0002, 0x0000, 0, 0, 0); > + return retval; > +} > + > +int deinit_device(struct usb_device *udev) > +{ > + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, > + 0x0004, 0x0000, 0, 0, 0); > +} > + > +static void astk_delete(struct hydro_i_pro_device *hdev) > +{ > + usb_put_intf(hdev->interface); > + usb_put_dev(hdev->udev); > + kfree(hdev->bulk_in_buffer); > + kfree(hdev->bulk_out_buffer); > + kfree(hdev); > +} > + > +static int astk_probe(struct usb_interface *interface, > + const struct usb_device_id *id) > +{ > + struct hydro_i_pro_device *hdev; > + int retval; > + struct usb_endpoint_descriptor *bulk_in, *bulk_out; > + > + hdev = kzalloc(sizeof(*hdev), GFP_KERNEL); > + if (!hdev) { > + retval = -ENOMEM; > + goto exit; > + } > + > + retval = usb_find_common_endpoints(interface->cur_altsetting, &bulk_in, > + &bulk_out, NULL, NULL); > + if (retval != 0) > + goto exit; > + > + hdev->udev = usb_get_dev(interface_to_usbdev(interface)); > + hdev->interface = usb_get_intf(interface); > + > + /* set up the endpoint information */ > + /* use only the first bulk-in and bulk-out endpoints */ > + hdev->bulk_in_size = usb_endpoint_maxp(bulk_in); > + hdev->bulk_in_buffer = kmalloc(hdev->bulk_in_size, GFP_KERNEL); > + hdev->bulk_in_endpointAddr = bulk_in->bEndpointAddress; > + hdev->bulk_out_size = usb_endpoint_maxp(bulk_out); > + hdev->bulk_out_buffer = kmalloc(hdev->bulk_out_size, GFP_KERNEL); > + hdev->bulk_out_endpointAddr = bulk_out->bEndpointAddress; > + > + retval = init_device(hdev->udev); > + if (retval) { > + dev_err(&interface->dev, "failed initialising this device.\n"); > + goto exit; > + } > + > + hwmon_init(hdev); > + > + usb_set_intfdata(interface, hdev); > + sema_init(&hdev->limit_sem, 8); > +exit: > + return retval; > +} > + > +static void astk_disconnect(struct usb_interface *interface) > +{ > + struct hydro_i_pro_device *hdev = usb_get_intfdata(interface); > + > + dev_info(&hdev->udev->dev, "[*] DEINIT DEVICE\n"); > + usb_set_intfdata(interface, NULL); > + astk_delete(hdev); > + deinit_device(hdev->udev); > +} > +static int astk_resume(struct usb_interface *intf) > +{ > + return 0; > +} > + > +static int astk_suspend(struct usb_interface *intf, pm_message_t message) > +{ > + return 0; > +} > + > +static struct usb_driver hydro_i_pro_driver = { > + .name = "hydro_i_pro_device", > + .id_table = astk_table, > + .probe = astk_probe, > + .disconnect = astk_disconnect, > + .resume = astk_resume, > + .suspend = astk_suspend, > + .supports_autosuspend = 1, > +}; > + > +static int __init hydro_i_pro_init(void) > +{ > + return usb_register(&hydro_i_pro_driver); > +} > + > +static void __exit hydro_i_pro_exit(void) > +{ > + usb_deregister(&hydro_i_pro_driver); > +} > + > +module_init(hydro_i_pro_init); > +module_exit(hydro_i_pro_exit); > + > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Jaap Aarts <jaap.aarts1@gmail.com>"); > +MODULE_DESCRIPTION("Corsair HXXXi pro device driver"); >
Hi jaap,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on hwmon/hwmon-next]
[also build test WARNING on v5.8-rc5 next-20200717]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/jaap-aarts/hwmon-add-fan-pwm-driver-for-corsair-h100i-platinum/20200717-201923
base: https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
config: x86_64-allyesconfig (attached as .config)
compiler: clang version 12.0.0 (https://github.com/llvm/llvm-project ed6b578040a85977026c93bf4188f996148f3218)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install x86_64 cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> drivers/hwmon/corsair_hydro_i_pro.c:175:5: warning: no previous prototype for function 'set_fan_pwm_curve' [-Wmissing-prototypes]
int set_fan_pwm_curve(struct hydro_i_pro_device *hdev,
^
drivers/hwmon/corsair_hydro_i_pro.c:175:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int set_fan_pwm_curve(struct hydro_i_pro_device *hdev,
^
static
>> drivers/hwmon/corsair_hydro_i_pro.c:222:5: warning: no previous prototype for function 'set_fan_target_rpm' [-Wmissing-prototypes]
int set_fan_target_rpm(struct hydro_i_pro_device *hdev,
^
drivers/hwmon/corsair_hydro_i_pro.c:222:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int set_fan_target_rpm(struct hydro_i_pro_device *hdev,
^
static
>> drivers/hwmon/corsair_hydro_i_pro.c:258:5: warning: no previous prototype for function 'get_fan_current_rpm' [-Wmissing-prototypes]
int get_fan_current_rpm(struct hydro_i_pro_device *hdev,
^
drivers/hwmon/corsair_hydro_i_pro.c:258:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int get_fan_current_rpm(struct hydro_i_pro_device *hdev,
^
static
>> drivers/hwmon/corsair_hydro_i_pro.c:292:5: warning: no previous prototype for function 'set_fan_target_pwm' [-Wmissing-prototypes]
int set_fan_target_pwm(struct hydro_i_pro_device *hdev,
^
drivers/hwmon/corsair_hydro_i_pro.c:292:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int set_fan_target_pwm(struct hydro_i_pro_device *hdev,
^
static
>> drivers/hwmon/corsair_hydro_i_pro.c:327:9: warning: no previous prototype for function 'hwmon_is_visible' [-Wmissing-prototypes]
umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, u32 attr,
^
drivers/hwmon/corsair_hydro_i_pro.c:327:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, u32 attr,
^
static
>> drivers/hwmon/corsair_hydro_i_pro.c:481:5: warning: no previous prototype for function 'hwmon_read' [-Wmissing-prototypes]
int hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
^
drivers/hwmon/corsair_hydro_i_pro.c:481:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
^
static
>> drivers/hwmon/corsair_hydro_i_pro.c:561:6: warning: no previous prototype for function 'does_fan_exist' [-Wmissing-prototypes]
bool does_fan_exist(struct hydro_i_pro_device *hdev, int channel)
^
drivers/hwmon/corsair_hydro_i_pro.c:561:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
bool does_fan_exist(struct hydro_i_pro_device *hdev, int channel)
^
static
>> drivers/hwmon/corsair_hydro_i_pro.c:589:5: warning: no previous prototype for function 'get_fan_count' [-Wmissing-prototypes]
int get_fan_count(struct hydro_i_pro_device *hdev)
^
drivers/hwmon/corsair_hydro_i_pro.c:589:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int get_fan_count(struct hydro_i_pro_device *hdev)
^
static
>> drivers/hwmon/corsair_hydro_i_pro.c:598:6: warning: no previous prototype for function 'hwmon_init' [-Wmissing-prototypes]
void hwmon_init(struct hydro_i_pro_device *hdev)
^
drivers/hwmon/corsair_hydro_i_pro.c:598:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void hwmon_init(struct hydro_i_pro_device *hdev)
^
static
>> drivers/hwmon/corsair_hydro_i_pro.c:671:5: warning: no previous prototype for function 'init_device' [-Wmissing-prototypes]
int init_device(struct usb_device *udev)
^
drivers/hwmon/corsair_hydro_i_pro.c:671:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int init_device(struct usb_device *udev)
^
static
>> drivers/hwmon/corsair_hydro_i_pro.c:688:5: warning: no previous prototype for function 'deinit_device' [-Wmissing-prototypes]
int deinit_device(struct usb_device *udev)
^
drivers/hwmon/corsair_hydro_i_pro.c:688:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int deinit_device(struct usb_device *udev)
^
static
>> drivers/hwmon/corsair_hydro_i_pro.c:166:19: warning: unused variable 'SUCCESS' [-Wunused-const-variable]
static const char SUCCESS[SUCCES_LENGTH - 1] = { 0x12, 0x34 };
^
12 warnings generated.
vim +/set_fan_pwm_curve +175 drivers/hwmon/corsair_hydro_i_pro.c
163
164 #define SUCCES_LENGTH 3
165 #define SUCCES_CODE (0x12, 0x34)
> 166 static const char SUCCESS[SUCCES_LENGTH - 1] = { 0x12, 0x34 };
167
168 static bool check_succes(enum opcodes command, char ret[SUCCES_LENGTH])
169 {
170 char success[SUCCES_LENGTH] = { command, SUCCES_CODE };
171
172 return strncmp(ret, success, SUCCES_LENGTH) == 0;
173 }
174
> 175 int set_fan_pwm_curve(struct hydro_i_pro_device *hdev,
176 struct hwmon_fan_data *fan_data,
177 struct curve_point point[7])
178 {
179 int retval;
180 int wrote;
181 int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr);
182 int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr);
183 unsigned char *send_buf = hdev->bulk_out_buffer;
184 unsigned char *recv_buf = hdev->bulk_in_buffer;
185
186 memcpy(fan_data->curve, point, sizeof(fan_data->curve));
187
188 send_buf[0] = PWM_FAN_CURVE_CMD;
189 send_buf[1] = fan_data->fan_channel;
190 send_buf[2] = point[0].temp;
191 send_buf[3] = point[1].temp;
192 send_buf[4] = point[2].temp;
193 send_buf[5] = point[3].temp;
194 send_buf[6] = point[4].temp;
195 send_buf[7] = point[5].temp;
196 send_buf[8] = point[6].temp;
197 send_buf[9] = point[0].pwm;
198 send_buf[10] = point[1].pwm;
199 send_buf[11] = point[2].pwm;
200 send_buf[12] = point[3].pwm;
201 send_buf[13] = point[4].pwm;
202 send_buf[14] = point[5].pwm;
203 send_buf[15] = point[6].pwm;
204
205 retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 16, &wrote, 100);
206 if (retval != 0)
207 return retval;
208
209 retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 4, &wrote, 100);
210 if (retval != 0)
211 return retval;
212
213 if (!check_succes(send_buf[0], recv_buf)) {
214 dev_info(&hdev->udev->dev,
215 "[*] failed setting fan curve %d,%d,%d/%d\n",
216 recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
217 return -EINVAL;
218 }
219 return 0;
220 }
221
> 222 int set_fan_target_rpm(struct hydro_i_pro_device *hdev,
223 struct hwmon_fan_data *fan_data, long val)
224 {
225 int retval;
226 int wrote;
227 int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr);
228 int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr);
229
230 unsigned char *send_buf = hdev->bulk_out_buffer;
231 unsigned char *recv_buf = hdev->bulk_in_buffer;
232
233 fan_data->fan_target = val;
234 fan_data->fan_pwm_target = 0;
235
236 send_buf[0] = RPM_FAN_TARGET_CMD;
237 send_buf[1] = fan_data->fan_channel;
238 send_buf[2] = (fan_data->fan_target >> 8);
239 send_buf[3] = fan_data->fan_target;
240
241 retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100);
242 if (retval != 0)
243 return retval;
244
245 retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100);
246 if (retval != 0)
247 return retval;
248
249 if (!check_succes(send_buf[0], recv_buf)) {
250 dev_info(&hdev->udev->dev,
251 "[*] failed setting fan rpm %d,%d,%d/%d\n",
252 recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
253 return -EINVAL;
254 }
255 return 0;
256 }
257
> 258 int get_fan_current_rpm(struct hydro_i_pro_device *hdev,
259 struct hwmon_fan_data *fan_data, long *val)
260 {
261 int retval;
262 int wrote;
263 int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr);
264 int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr);
265
266 unsigned char *send_buf = hdev->bulk_out_buffer;
267 unsigned char *recv_buf = hdev->bulk_in_buffer;
268
269 send_buf[0] = PWM_GET_CURRENT_CMD;
270 send_buf[1] = fan_data->fan_channel;
271
272 retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 2, &wrote, 100);
273 if (retval != 0)
274 return retval;
275
276 retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100);
277 if (retval != 0)
278 return retval;
279
280 if (!check_succes(send_buf[0], recv_buf) ||
281 recv_buf[3] != fan_data->fan_channel) {
282 dev_info(&hdev->udev->dev,
283 "[*] failed retrieving fan rmp %d,%d,%d/%d\n",
284 recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
285 return -EINVAL;
286 }
287
288 *val = ((recv_buf[4]) << 8) + recv_buf[5];
289 return 0;
290 }
291
> 292 int set_fan_target_pwm(struct hydro_i_pro_device *hdev,
293 struct hwmon_fan_data *fan_data, long val)
294 {
295 int retval;
296 int wrote;
297 int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr);
298 int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr);
299
300 unsigned char *send_buf = hdev->bulk_out_buffer;
301 unsigned char *recv_buf = hdev->bulk_in_buffer;
302
303 fan_data->fan_pwm_target = val;
304 fan_data->fan_target = 0;
305
306 send_buf[0] = PWM_FAN_TARGET_CMD;
307 send_buf[1] = fan_data->fan_channel;
308 send_buf[3] = fan_data->fan_pwm_target;
309
310 retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100);
311 if (retval != 0)
312 return retval;
313
314 retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000);
315 if (retval != 0)
316 return retval;
317
318 if (!check_succes(send_buf[0], recv_buf)) {
319 dev_info(&hdev->udev->dev,
320 "[*] failed setting fan pwm %d,%d,%d/%d\n",
321 recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
322 return -EINVAL;
323 }
324 return 0;
325 }
326
> 327 umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, u32 attr,
328 int channel)
329 {
330 switch (type) {
331 case hwmon_fan:
332 switch (attr) {
333 case hwmon_fan_input:
334 return 0444;
335 break;
336 case hwmon_fan_target:
337 return 0644;
338 break;
339 case hwmon_fan_min:
340 return 0444;
341 break;
342 default:
343 break;
344 }
345 break;
346 case hwmon_pwm:
347 switch (attr) {
348 case hwmon_pwm_input:
349 return 0200;
350 break;
351 case hwmon_pwm_enable:
352 return 0644;
353 break;
354 default:
355 break;
356 }
357 break;
358 default:
359 break;
360 }
361 return 0;
362 }
363
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
On Sat, 18 Jul 2020 at 01:15, Guenter Roeck <linux@roeck-us.net> wrote: > > On 7/17/20 5:16 AM, jaap aarts wrote: > > Adds fan/pwm support for H100i platinum. > > Custom temp/fan curves are not supported, however > > the presets found in the proprietary drivers are available. > > > > Signed-off-by: Jaap Aarts <jaap.aarts1@gmail.com> > > Most of my comments have not been addressed. I replied to your comments, everything I mentioned as fixed/changed has been addressed in this new patch. You didn't respond to that any further even though you did reply to my other email. So I thought I was supposed to just send in v2. > Change log is missing. I don't know what you mean, I have a from line, I have a one-line description of the patch, the email subject just like some other patches, I have a multi-line description, and a signed-off-by line. According to the linux docs (https://www.kernel.org/doc/html/latest/process/5.Posting.html?highlight=changelog#patch-formatting-and-changelogs) This is what a changelog should be. If you mean changelog from v1, I mailed about all the fixed/changed things in this patch. I also send a follow-up email noting that after some research I found out that this driver should NOT work with all asetek gen6 based coolers, and that I changed the scope of the driver to just a single line of corsair products. > 0-day feedback has not been adressed. True, I did not fix all of those, I wasn't sure how to take all of them since it was a long list. The rest of the 0-day feedback will be fixed next round. > > Guenter > > > --- > > drivers/hwmon/Kconfig | 6 + > > drivers/hwmon/Makefile | 1 + > > drivers/hwmon/corsair_hydro_i_pro.c | 791 ++++++++++++++++++++++++++++ > > 3 files changed, 798 insertions(+) > > create mode 100644 drivers/hwmon/corsair_hydro_i_pro.c > > > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > > index 288ae9f63588..9831a40fb05f 100644 > > --- a/drivers/hwmon/Kconfig > > +++ b/drivers/hwmon/Kconfig > > @@ -378,6 +378,12 @@ config SENSORS_ARM_SCPI > > and power sensors available on ARM Ltd's SCP based platforms. The > > actual number and type of sensors exported depend on the platform. > > > > +config SENSORS_CORSAIR_HYDRO_I_PRO > > + tristate "Corsair hydro HXXXi pro driver" > > + help > > + If you say yes here you get support for the corsair hydro HXXXi pro > > + range of devices. > > + > > config SENSORS_ASB100 > > tristate "Asus ASB100 Bach" > > depends on X86 && I2C > > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > > index 3e32c21f5efe..ec63294b3ef1 100644 > > --- a/drivers/hwmon/Makefile > > +++ b/drivers/hwmon/Makefile > > @@ -20,6 +20,7 @@ obj-$(CONFIG_SENSORS_W83793) += w83793.o > > obj-$(CONFIG_SENSORS_W83795) += w83795.o > > obj-$(CONFIG_SENSORS_W83781D) += w83781d.o > > obj-$(CONFIG_SENSORS_W83791D) += w83791d.o > > +obj-$(CONFIG_SENSORS_CORSAIR_HYDRO_I_PRO) += corsair_hydro_i_pro.o > > > > obj-$(CONFIG_SENSORS_AB8500) += abx500.o ab8500.o > > obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o > > diff --git a/drivers/hwmon/corsair_hydro_i_pro.c b/drivers/hwmon/corsair_hydro_i_pro.c > > new file mode 100644 > > index 000000000000..43bf52d8d365 > > --- /dev/null > > +++ b/drivers/hwmon/corsair_hydro_i_pro.c > > @@ -0,0 +1,791 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later > > +/* > > + * A hwmon driver for all corsair hyxro HXXXi pro all-in-one liquid coolers. > > + * Copyright (c) Jaap Aarts 2020 > > + * > > + * Protocol reverse engineered by audiohacked > > + * https://github.com/audiohacked/OpendriverLink > > + */ > > + > > +/* > > + * Supports following liquid coolers: > > + * H100i platinum > > + * > > + * Other products should work with this driver but no testing has been done. > > + * > > + * Note: platinum is the codename name for pro within the driver, so H100i platinum = H100i pro. > > + * But some products are actually calles platinum, these are not intended to be supported. > > + * > > + * Note: fan curve control has not been implemented > > + */ > > +#include <linux/errno.h> > > +#include <linux/hwmon.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/slab.h> > > +#include <linux/usb.h> > > + > > +struct hydro_i_pro_device { > > + struct usb_device *udev; > > + > > + unsigned char *bulk_out_buffer; > > + char *bulk_in_buffer; > > + size_t bulk_out_size; > > + size_t bulk_in_size; > > + char bulk_in_endpointAddr; > > + char bulk_out_endpointAddr; > > + > > + struct usb_interface *interface; /* the interface for this device */ > > + struct semaphore > > + limit_sem; /* limiting the number of writes in progress */ > > +}; > > + > > +struct curve_point { > > + uint8_t temp; > > + uint8_t pwm; > > +}; > > + > > +struct hwmon_fan_data { > > + char fan_channel; > > + long fan_target; > > + unsigned char fan_pwm_target; > > + long mode; > > + struct curve_point curve[7]; > > +}; > > + > > +struct hwmon_data { > > + struct hydro_i_pro_device *hdev; > > + int channel_count; > > + void **channel_data; > > +}; > > + > > +struct curve_point quiet_curve[] = { > > + { > > + .temp = 0x1F, > > + .pwm = 0x15, > > + }, > > + { > > + .temp = 0x21, > > + .pwm = 0x1E, > > + }, > > + { > > + .temp = 0x24, > > + .pwm = 0x25, > > + }, > > + { > > + .temp = 0x27, > > + .pwm = 0x2D, > > + }, > > + { > > + .temp = 0x29, > > + .pwm = 0x38, > > + }, > > + { > > + .temp = 0x2C, > > + .pwm = 0x4A, > > + }, > > + { > > + .temp = 0x2F, > > + .pwm = 0x64, > > + }, > > +}; > > + > > +struct curve_point balanced_curve[] = { > > + { > > + .temp = 0x1C, > > + .pwm = 0x15, > > + }, > > + { > > + .temp = 0x1E, > > + .pwm = 0x1B, > > + }, > > + { > > + .temp = 0x20, > > + .pwm = 0x23, > > + }, > > + { > > + .temp = 0x22, > > + .pwm = 0x28, > > + }, > > + { > > + .temp = 0x24, > > + .pwm = 0x32, > > + }, > > + { > > + .temp = 0x27, > > + .pwm = 0x48, > > + }, > > + { > > + .temp = 0x29, > > + .pwm = 0x64, > > + }, > > +}; > > + > > +struct curve_point extreme_curve[] = { > > + { > > + .temp = 0x19, > > + .pwm = 0x28, > > + }, > > + { > > + .temp = 0x1B, > > + .pwm = 0x2E, > > + }, > > + { > > + .temp = 0x1D, > > + .pwm = 0x37, > > + }, > > + { > > + .temp = 0x1E, > > + .pwm = 0x41, > > + }, > > + { > > + .temp = 0x1F, > > + .pwm = 0x4C, > > + }, > > + { > > + .temp = 0x20, > > + .pwm = 0x56, > > + }, > > + { > > + .temp = 0x21, > > + .pwm = 0x64, > > + }, > > +}; > > + > > +#define default_curve quiet_curve > > + > > +enum opcodes { > > + PWM_FAN_CURVE_CMD = 0x40, > > + PWM_GET_CURRENT_CMD = 0x41, > > + PWM_FAN_TARGET_CMD = 0x42, > > + RPM_FAN_TARGET_CMD = 0x43, > > +}; > > + > > +#define SUCCES_LENGTH 3 > > +#define SUCCES_CODE (0x12, 0x34) > > +static const char SUCCESS[SUCCES_LENGTH - 1] = { 0x12, 0x34 }; > > + > > +static bool check_succes(enum opcodes command, char ret[SUCCES_LENGTH]) > > +{ > > + char success[SUCCES_LENGTH] = { command, SUCCES_CODE }; > > + > > + return strncmp(ret, success, SUCCES_LENGTH) == 0; > > +} > > + > > +int set_fan_pwm_curve(struct hydro_i_pro_device *hdev, > > + struct hwmon_fan_data *fan_data, > > + struct curve_point point[7]) > > +{ > > + int retval; > > + int wrote; > > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > > + unsigned char *send_buf = hdev->bulk_out_buffer; > > + unsigned char *recv_buf = hdev->bulk_in_buffer; > > + > > + memcpy(fan_data->curve, point, sizeof(fan_data->curve)); > > + > > + send_buf[0] = PWM_FAN_CURVE_CMD; > > + send_buf[1] = fan_data->fan_channel; > > + send_buf[2] = point[0].temp; > > + send_buf[3] = point[1].temp; > > + send_buf[4] = point[2].temp; > > + send_buf[5] = point[3].temp; > > + send_buf[6] = point[4].temp; > > + send_buf[7] = point[5].temp; > > + send_buf[8] = point[6].temp; > > + send_buf[9] = point[0].pwm; > > + send_buf[10] = point[1].pwm; > > + send_buf[11] = point[2].pwm; > > + send_buf[12] = point[3].pwm; > > + send_buf[13] = point[4].pwm; > > + send_buf[14] = point[5].pwm; > > + send_buf[15] = point[6].pwm; > > + > > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 16, &wrote, 100); > > + if (retval != 0) > > + return retval; > > + > > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 4, &wrote, 100); > > + if (retval != 0) > > + return retval; > > + > > + if (!check_succes(send_buf[0], recv_buf)) { > > + dev_info(&hdev->udev->dev, > > + "[*] failed setting fan curve %d,%d,%d/%d\n", > > + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > > + return -EINVAL; > > + } > > + return 0; > > +} > > + > > +int set_fan_target_rpm(struct hydro_i_pro_device *hdev, > > + struct hwmon_fan_data *fan_data, long val) > > +{ > > + int retval; > > + int wrote; > > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > > + > > + unsigned char *send_buf = hdev->bulk_out_buffer; > > + unsigned char *recv_buf = hdev->bulk_in_buffer; > > + > > + fan_data->fan_target = val; > > + fan_data->fan_pwm_target = 0; > > + > > + send_buf[0] = RPM_FAN_TARGET_CMD; > > + send_buf[1] = fan_data->fan_channel; > > + send_buf[2] = (fan_data->fan_target >> 8); > > + send_buf[3] = fan_data->fan_target; > > + > > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > > + if (retval != 0) > > + return retval; > > + > > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100); > > + if (retval != 0) > > + return retval; > > + > > + if (!check_succes(send_buf[0], recv_buf)) { > > + dev_info(&hdev->udev->dev, > > + "[*] failed setting fan rpm %d,%d,%d/%d\n", > > + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > > + return -EINVAL; > > + } > > + return 0; > > +} > > + > > +int get_fan_current_rpm(struct hydro_i_pro_device *hdev, > > + struct hwmon_fan_data *fan_data, long *val) > > +{ > > + int retval; > > + int wrote; > > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > > + > > + unsigned char *send_buf = hdev->bulk_out_buffer; > > + unsigned char *recv_buf = hdev->bulk_in_buffer; > > + > > + send_buf[0] = PWM_GET_CURRENT_CMD; > > + send_buf[1] = fan_data->fan_channel; > > + > > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 2, &wrote, 100); > > + if (retval != 0) > > + return retval; > > + > > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100); > > + if (retval != 0) > > + return retval; > > + > > + if (!check_succes(send_buf[0], recv_buf) || > > + recv_buf[3] != fan_data->fan_channel) { > > + dev_info(&hdev->udev->dev, > > + "[*] failed retrieving fan rmp %d,%d,%d/%d\n", > > + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > > + return -EINVAL; > > + } > > + > > + *val = ((recv_buf[4]) << 8) + recv_buf[5]; > > + return 0; > > +} > > + > > +int set_fan_target_pwm(struct hydro_i_pro_device *hdev, > > + struct hwmon_fan_data *fan_data, long val) > > +{ > > + int retval; > > + int wrote; > > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > > + > > + unsigned char *send_buf = hdev->bulk_out_buffer; > > + unsigned char *recv_buf = hdev->bulk_in_buffer; > > + > > + fan_data->fan_pwm_target = val; > > + fan_data->fan_target = 0; > > + > > + send_buf[0] = PWM_FAN_TARGET_CMD; > > + send_buf[1] = fan_data->fan_channel; > > + send_buf[3] = fan_data->fan_pwm_target; > > + > > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > > + if (retval != 0) > > + return retval; > > + > > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000); > > + if (retval != 0) > > + return retval; > > + > > + if (!check_succes(send_buf[0], recv_buf)) { > > + dev_info(&hdev->udev->dev, > > + "[*] failed setting fan pwm %d,%d,%d/%d\n", > > + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > > + return -EINVAL; > > + } > > + return 0; > > +} > > + > > +umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, u32 attr, > > + int channel) > > +{ > > + switch (type) { > > + case hwmon_fan: > > + switch (attr) { > > + case hwmon_fan_input: > > + return 0444; > > + break; > > + case hwmon_fan_target: > > + return 0644; > > + break; > > + case hwmon_fan_min: > > + return 0444; > > + break; > > + default: > > + break; > > + } > > + break; > > + case hwmon_pwm: > > + switch (attr) { > > + case hwmon_pwm_input: > > + return 0200; > > + break; > > + case hwmon_pwm_enable: > > + return 0644; > > + break; > > + default: > > + break; > > + } > > + break; > > + default: > > + break; > > + } > > + return 0; > > +} > > + > > +static int hwmon_write(struct device *dev, enum hwmon_sensor_types type, > > + u32 attr, int channel, long val) > > +{ > > + struct hwmon_data *data = dev_get_drvdata(dev); > > + struct hydro_i_pro_device *hdev = data->hdev; > > + struct hwmon_fan_data *fan_data; > > + int retval = 0; > > + > > + switch (type) { > > + case hwmon_fan: > > + switch (attr) { > > + case hwmon_fan_target: > > + fan_data = data->channel_data[channel]; > > + if (fan_data->mode != 1) > > + return -EINVAL; > > + > > + retval = usb_autopm_get_interface(hdev->interface); > > + if (retval) > > + goto exit; > > + > > + if (down_trylock(&hdev->limit_sem)) { > > + retval = -EAGAIN; > > + goto cleanup_interface; > > + } > > + > > + retval = set_fan_target_rpm(hdev, fan_data, val); > > + if (retval) > > + goto cleanup; > > + > > + break; > > + default: > > + return -EINVAL; > > + } > > + goto exit; > > + case hwmon_pwm: > > + switch (attr) { > > + case hwmon_pwm_input: > > + fan_data = data->channel_data[channel]; > > + if (fan_data->mode != 1) > > + return -EINVAL; > > + > > + retval = usb_autopm_get_interface(hdev->interface); > > + if (retval) > > + goto exit; > > + > > + if (down_trylock(&hdev->limit_sem)) { > > + retval = -EAGAIN; > > + goto cleanup_interface; > > + } > > + > > + retval = set_fan_target_pwm(hdev, fan_data, val); > > + if (retval) > > + goto cleanup; > > + > > + break; > > + case hwmon_pwm_enable: > > + fan_data = data->channel_data[channel]; > > + > > + retval = usb_autopm_get_interface(hdev->interface); > > + if (retval) > > + goto exit; > > + > > + if (down_trylock(&hdev->limit_sem)) { > > + retval = -EAGAIN; > > + goto cleanup_interface; > > + } > > + fan_data->mode = val; > > + > > + switch (val) { > > + case 0: > > + set_fan_pwm_curve(hdev, fan_data, > > + default_curve); > > + break; > > + case 1: > > + if (fan_data->fan_target != 0) { > > + retval = set_fan_target_rpm( > > + hdev, fan_data, > > + fan_data->fan_target); > > + if (retval) > > + goto cleanup; > > + } else if (fan_data->fan_pwm_target != 0) { > > + retval = set_fan_target_pwm( > > + hdev, fan_data, > > + fan_data->fan_pwm_target); > > + if (retval) > > + goto cleanup; > > + } > > + break; > > + case 2: > > + set_fan_pwm_curve(hdev, fan_data, quiet_curve); > > + break; > > + case 3: > > + set_fan_pwm_curve(hdev, fan_data, > > + balanced_curve); > > + break; > > + case 4: > > + set_fan_pwm_curve(hdev, fan_data, > > + extreme_curve); > > + break; > > + } > > + break; > > + default: > > + return -EINVAL; > > + } > > + goto exit; > > + default: > > + return -EINVAL; > > + } > > + > > +cleanup: > > + up(&hdev->limit_sem); > > +cleanup_interface: > > + usb_autopm_put_interface(hdev->interface); > > +exit: > > + return retval; > > +} > > + > > +int hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, > > + int channel, long *val) > > +{ > > + struct hwmon_data *data = dev_get_drvdata(dev); > > + struct hydro_i_pro_device *hdev = data->hdev; > > + struct hwmon_fan_data *fan_data; > > + int retval = 0; > > + > > + if (channel >= data->channel_count) > > + return -EAGAIN; > > + > > + switch (type) { > > + case hwmon_fan: > > + switch (attr) { > > + case hwmon_fan_input: > > + fan_data = data->channel_data[channel]; > > + > > + retval = usb_autopm_get_interface(hdev->interface); > > + if (retval) > > + goto exit; > > + > > + if (down_trylock(&hdev->limit_sem)) { > > + retval = -EAGAIN; > > + goto cleanup_interface; > > + } > > + > > + retval = get_fan_current_rpm(hdev, fan_data, val); > > + if (retval) > > + goto cleanup; > > + > > + goto cleanup; > > + case hwmon_fan_target: > > + fan_data = data->channel_data[channel]; > > + if (fan_data->mode != 1) { > > + *val = 0; > > + goto exit; > > + } > > + *val = fan_data->fan_target; > > + goto exit; > > + case hwmon_fan_min: > > + *val = 200; > > + goto exit; > > + > > + default: > > + return -EINVAL; > > + } > > + goto exit; > > + > > + case hwmon_pwm: > > + switch (attr) { > > + case hwmon_pwm_enable: > > + fan_data = data->channel_data[channel]; > > + *val = fan_data->mode; > > + goto exit; > > + default: > > + return -EINVAL; > > + } > > + goto exit; > > + > > + default: > > + return -EINVAL; > > + } > > + > > +cleanup: > > + up(&hdev->limit_sem); > > +cleanup_interface: > > + usb_autopm_put_interface(hdev->interface); > > +exit: > > + return retval; > > +} > > + > > +#define fan_config (HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN) > > +#define pwm_config (HWMON_PWM_INPUT | HWMON_PWM_ENABLE) > > + > > +static const struct hwmon_ops i_pro_ops = { > > + .is_visible = hwmon_is_visible, > > + .read = hwmon_read, > > + .write = hwmon_write, > > +}; > > + > > +bool does_fan_exist(struct hydro_i_pro_device *hdev, int channel) > > +{ > > + int retval; > > + int wrote; > > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > > + > > + unsigned char *send_buf = hdev->bulk_out_buffer; > > + unsigned char *recv_buf = hdev->bulk_in_buffer; > > + > > + send_buf[0] = RPM_FAN_TARGET_CMD; > > + send_buf[1] = channel; > > + send_buf[2] = (600 >> 8); > > + send_buf[3] = (unsigned char)600; > > + > > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > > + if (retval != 0) > > + return false; > > + > > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000); > > + if (retval != 0) > > + return false; > > + > > + if (!check_succes(send_buf[0], recv_buf)) > > + return false; > > + return true; > > +} > > + > > +int get_fan_count(struct hydro_i_pro_device *hdev) > > +{ > > + int fan; > > + > > + for (fan = 0; does_fan_exist(hdev, fan); fan += 1) > > + ; > > + return fan; > > +} > > + > > +void hwmon_init(struct hydro_i_pro_device *hdev) > > +{ > > + int fan_id; > > + struct device *hwmon_dev; > > + struct hwmon_fan_data *fan; > > + struct hwmon_data *data = devm_kzalloc( > > + &hdev->udev->dev, sizeof(struct hwmon_data), GFP_KERNEL); > > + struct hwmon_chip_info *hwmon_info = devm_kzalloc( > > + &hdev->udev->dev, sizeof(struct hwmon_chip_info), GFP_KERNEL); > > + //Allocate the info table > > + struct hwmon_channel_info **aio_info = > > + devm_kzalloc(&hdev->udev->dev, > > + sizeof(struct hwmon_channel_info *) * 2, > > + GFP_KERNEL); //2 for each channel info. > > + > > + //Allocate the fan and PWM configuration > > + u32 *fans_config = devm_kzalloc(&hdev->udev->dev, > > + sizeof(u32) * (data->channel_count + 1), > > + GFP_KERNEL); > > + u32 *pwms_config = devm_kzalloc(&hdev->udev->dev, > > + sizeof(u32) * (data->channel_count + 1), > > + GFP_KERNEL); > > + > > + data->channel_count = get_fan_count(hdev); //amount of fans > > + data->channel_data = > > + devm_kzalloc(&hdev->udev->dev, > > + sizeof(char *) * data->channel_count, GFP_KERNEL); > > + > > + //For each fan create a data channel a fan config entry and a pwm config entry > > + for (fan_id = 0; fan_id <= data->channel_count; fan_id++) { > > + fan = devm_kzalloc(&hdev->udev->dev, > > + sizeof(struct hwmon_fan_data), GFP_KERNEL); > > + fan->fan_channel = fan_id; > > + fan->mode = 2; > > + data->channel_data[fan_id] = fan; > > + fans_config[fan_id] = fan_config; > > + pwms_config[fan_id] = pwm_config; > > + } > > + fans_config[data->channel_count] = 0; > > + pwms_config[data->channel_count] = 0; > > + > > + aio_info[0] = > > + devm_kzalloc(&hdev->udev->dev, > > + sizeof(struct hwmon_channel_info), GFP_KERNEL); > > + aio_info[0]->type = hwmon_fan; > > + aio_info[0]->config = fans_config; > > + > > + aio_info[1] = > > + devm_kzalloc(&hdev->udev->dev, > > + sizeof(struct hwmon_channel_info), GFP_KERNEL); > > + aio_info[1]->type = hwmon_pwm; > > + aio_info[1]->config = pwms_config; > > + > > + hwmon_info->ops = &i_pro_ops; > > + hwmon_info->info = (const struct hwmon_channel_info **)aio_info; > > + > > + data->hdev = hdev; > > + hwmon_dev = devm_hwmon_device_register_with_info( > > + &hdev->udev->dev, "driver_fan", data, hwmon_info, NULL); > > + dev_info(&hdev->udev->dev, "[*] Setup hwmon\n"); > > +} > > + > > +/* > > + * Devices that work with this driver. > > + * More devices should work, however none have been tested. > > + */ > > +static const struct usb_device_id astk_table[] = { > > + { USB_DEVICE(0x1b1c, 0x0c15) }, > > + {}, > > +}; > > + > > +MODULE_DEVICE_TABLE(usb, astk_table); > > + > > +int init_device(struct usb_device *udev) > > +{ > > + int retval; > > + > > + //This is needed because when running windows in a vm with proprietary driver > > + //and you switch to this driver, the device will not respond unless you run this. > > + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x40, > > + 0xffff, 0x0000, 0, 0, 0); > > + //this always returns error > > + if (retval != 0) > > + ; > > + > > + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, > > + 0x0002, 0x0000, 0, 0, 0); > > + return retval; > > +} > > + > > +int deinit_device(struct usb_device *udev) > > +{ > > + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, > > + 0x0004, 0x0000, 0, 0, 0); > > +} > > + > > +static void astk_delete(struct hydro_i_pro_device *hdev) > > +{ > > + usb_put_intf(hdev->interface); > > + usb_put_dev(hdev->udev); > > + kfree(hdev->bulk_in_buffer); > > + kfree(hdev->bulk_out_buffer); > > + kfree(hdev); > > +} > > + > > +static int astk_probe(struct usb_interface *interface, > > + const struct usb_device_id *id) > > +{ > > + struct hydro_i_pro_device *hdev; > > + int retval; > > + struct usb_endpoint_descriptor *bulk_in, *bulk_out; > > + > > + hdev = kzalloc(sizeof(*hdev), GFP_KERNEL); > > + if (!hdev) { > > + retval = -ENOMEM; > > + goto exit; > > + } > > + > > + retval = usb_find_common_endpoints(interface->cur_altsetting, &bulk_in, > > + &bulk_out, NULL, NULL); > > + if (retval != 0) > > + goto exit; > > + > > + hdev->udev = usb_get_dev(interface_to_usbdev(interface)); > > + hdev->interface = usb_get_intf(interface); > > + > > + /* set up the endpoint information */ > > + /* use only the first bulk-in and bulk-out endpoints */ > > + hdev->bulk_in_size = usb_endpoint_maxp(bulk_in); > > + hdev->bulk_in_buffer = kmalloc(hdev->bulk_in_size, GFP_KERNEL); > > + hdev->bulk_in_endpointAddr = bulk_in->bEndpointAddress; > > + hdev->bulk_out_size = usb_endpoint_maxp(bulk_out); > > + hdev->bulk_out_buffer = kmalloc(hdev->bulk_out_size, GFP_KERNEL); > > + hdev->bulk_out_endpointAddr = bulk_out->bEndpointAddress; > > + > > + retval = init_device(hdev->udev); > > + if (retval) { > > + dev_err(&interface->dev, "failed initialising this device.\n"); > > + goto exit; > > + } > > + > > + hwmon_init(hdev); > > + > > + usb_set_intfdata(interface, hdev); > > + sema_init(&hdev->limit_sem, 8); > > +exit: > > + return retval; > > +} > > + > > +static void astk_disconnect(struct usb_interface *interface) > > +{ > > + struct hydro_i_pro_device *hdev = usb_get_intfdata(interface); > > + > > + dev_info(&hdev->udev->dev, "[*] DEINIT DEVICE\n"); > > + usb_set_intfdata(interface, NULL); > > + astk_delete(hdev); > > + deinit_device(hdev->udev); > > +} > > +static int astk_resume(struct usb_interface *intf) > > +{ > > + return 0; > > +} > > + > > +static int astk_suspend(struct usb_interface *intf, pm_message_t message) > > +{ > > + return 0; > > +} > > + > > +static struct usb_driver hydro_i_pro_driver = { > > + .name = "hydro_i_pro_device", > > + .id_table = astk_table, > > + .probe = astk_probe, > > + .disconnect = astk_disconnect, > > + .resume = astk_resume, > > + .suspend = astk_suspend, > > + .supports_autosuspend = 1, > > +}; > > + > > +static int __init hydro_i_pro_init(void) > > +{ > > + return usb_register(&hydro_i_pro_driver); > > +} > > + > > +static void __exit hydro_i_pro_exit(void) > > +{ > > + usb_deregister(&hydro_i_pro_driver); > > +} > > + > > +module_init(hydro_i_pro_init); > > +module_exit(hydro_i_pro_exit); > > + > > +MODULE_LICENSE("GPL"); > > +MODULE_AUTHOR("Jaap Aarts <jaap.aarts1@gmail.com>"); > > +MODULE_DESCRIPTION("Corsair HXXXi pro device driver"); > > >
On 7/18/20 2:33 AM, jaap aarts wrote: > On Sat, 18 Jul 2020 at 01:15, Guenter Roeck <linux@roeck-us.net> wrote: >> >> On 7/17/20 5:16 AM, jaap aarts wrote: >>> Adds fan/pwm support for H100i platinum. >>> Custom temp/fan curves are not supported, however >>> the presets found in the proprietary drivers are available. >>> >>> Signed-off-by: Jaap Aarts <jaap.aarts1@gmail.com> >> >> Most of my comments have not been addressed. > > I replied to your comments, everything I mentioned as fixed/changed > has been addressed in this new patch. You didn't respond to that any > further even though you did reply to my other email. So I thought I > was supposed to just send in v2. > This is incorrect. I did say, for example, that I won't accept things like setting fan curves, and that the driver should provide sets of {temperature, pwm} attributes instead. There are several other comments which were not addressed, such as not using C++ comments and using "if (retval)" instead of "if (retval != 0)". There is still a 100-second timeout. I didn't check any further, but I think that is sufficient to say that several of my comments were not addressed. >> Change log is missing. > > I don't know what you mean, I have a from line, I have a one-line > description of the patch, the email subject just like some other > patches, I have a multi-line description, and a signed-off-by line. > According to the linux docs > (https://www.kernel.org/doc/html/latest/process/5.Posting.html?highlight=changelog#patch-formatting-and-changelogs) > This is what a changelog should be. > If you mean changelog from v1, I mailed about all the fixed/changed > things in this patch. I also send a follow-up email noting that after > some research I found out that this driver should NOT work with > all asetek gen6 based coolers, and that I changed the scope of > the driver to just a single line of corsair products. > I don't see anything along the line of v2: - made this change - made that change in this patch. >> 0-day feedback has not been adressed. > > True, I did not fix all of those, I wasn't sure how to take all of them > since it was a long list. I am not entirely sure how to respond to that. What would be the point of reviewing the code if a simple compile and sanity check reveals several errors, and you state yourself that you did not fix them all ? Guenter > The rest of the 0-day feedback will be fixed next round. > >> >> Guenter > > >> >>> --- >>> drivers/hwmon/Kconfig | 6 + >>> drivers/hwmon/Makefile | 1 + >>> drivers/hwmon/corsair_hydro_i_pro.c | 791 ++++++++++++++++++++++++++++ >>> 3 files changed, 798 insertions(+) >>> create mode 100644 drivers/hwmon/corsair_hydro_i_pro.c >>> >>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig >>> index 288ae9f63588..9831a40fb05f 100644 >>> --- a/drivers/hwmon/Kconfig >>> +++ b/drivers/hwmon/Kconfig >>> @@ -378,6 +378,12 @@ config SENSORS_ARM_SCPI >>> and power sensors available on ARM Ltd's SCP based platforms. The >>> actual number and type of sensors exported depend on the platform. >>> >>> +config SENSORS_CORSAIR_HYDRO_I_PRO >>> + tristate "Corsair hydro HXXXi pro driver" >>> + help >>> + If you say yes here you get support for the corsair hydro HXXXi pro >>> + range of devices. >>> + >>> config SENSORS_ASB100 >>> tristate "Asus ASB100 Bach" >>> depends on X86 && I2C >>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile >>> index 3e32c21f5efe..ec63294b3ef1 100644 >>> --- a/drivers/hwmon/Makefile >>> +++ b/drivers/hwmon/Makefile >>> @@ -20,6 +20,7 @@ obj-$(CONFIG_SENSORS_W83793) += w83793.o >>> obj-$(CONFIG_SENSORS_W83795) += w83795.o >>> obj-$(CONFIG_SENSORS_W83781D) += w83781d.o >>> obj-$(CONFIG_SENSORS_W83791D) += w83791d.o >>> +obj-$(CONFIG_SENSORS_CORSAIR_HYDRO_I_PRO) += corsair_hydro_i_pro.o >>> >>> obj-$(CONFIG_SENSORS_AB8500) += abx500.o ab8500.o >>> obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o >>> diff --git a/drivers/hwmon/corsair_hydro_i_pro.c b/drivers/hwmon/corsair_hydro_i_pro.c >>> new file mode 100644 >>> index 000000000000..43bf52d8d365 >>> --- /dev/null >>> +++ b/drivers/hwmon/corsair_hydro_i_pro.c >>> @@ -0,0 +1,791 @@ >>> +// SPDX-License-Identifier: GPL-2.0-or-later >>> +/* >>> + * A hwmon driver for all corsair hyxro HXXXi pro all-in-one liquid coolers. >>> + * Copyright (c) Jaap Aarts 2020 >>> + * >>> + * Protocol reverse engineered by audiohacked >>> + * https://github.com/audiohacked/OpendriverLink >>> + */ >>> + >>> +/* >>> + * Supports following liquid coolers: >>> + * H100i platinum >>> + * >>> + * Other products should work with this driver but no testing has been done. >>> + * >>> + * Note: platinum is the codename name for pro within the driver, so H100i platinum = H100i pro. >>> + * But some products are actually calles platinum, these are not intended to be supported. >>> + * >>> + * Note: fan curve control has not been implemented >>> + */ >>> +#include <linux/errno.h> >>> +#include <linux/hwmon.h> >>> +#include <linux/kernel.h> >>> +#include <linux/module.h> >>> +#include <linux/slab.h> >>> +#include <linux/usb.h> >>> + >>> +struct hydro_i_pro_device { >>> + struct usb_device *udev; >>> + >>> + unsigned char *bulk_out_buffer; >>> + char *bulk_in_buffer; >>> + size_t bulk_out_size; >>> + size_t bulk_in_size; >>> + char bulk_in_endpointAddr; >>> + char bulk_out_endpointAddr; >>> + >>> + struct usb_interface *interface; /* the interface for this device */ >>> + struct semaphore >>> + limit_sem; /* limiting the number of writes in progress */ >>> +}; >>> + >>> +struct curve_point { >>> + uint8_t temp; >>> + uint8_t pwm; >>> +}; >>> + >>> +struct hwmon_fan_data { >>> + char fan_channel; >>> + long fan_target; >>> + unsigned char fan_pwm_target; >>> + long mode; >>> + struct curve_point curve[7]; >>> +}; >>> + >>> +struct hwmon_data { >>> + struct hydro_i_pro_device *hdev; >>> + int channel_count; >>> + void **channel_data; >>> +}; >>> + >>> +struct curve_point quiet_curve[] = { >>> + { >>> + .temp = 0x1F, >>> + .pwm = 0x15, >>> + }, >>> + { >>> + .temp = 0x21, >>> + .pwm = 0x1E, >>> + }, >>> + { >>> + .temp = 0x24, >>> + .pwm = 0x25, >>> + }, >>> + { >>> + .temp = 0x27, >>> + .pwm = 0x2D, >>> + }, >>> + { >>> + .temp = 0x29, >>> + .pwm = 0x38, >>> + }, >>> + { >>> + .temp = 0x2C, >>> + .pwm = 0x4A, >>> + }, >>> + { >>> + .temp = 0x2F, >>> + .pwm = 0x64, >>> + }, >>> +}; >>> + >>> +struct curve_point balanced_curve[] = { >>> + { >>> + .temp = 0x1C, >>> + .pwm = 0x15, >>> + }, >>> + { >>> + .temp = 0x1E, >>> + .pwm = 0x1B, >>> + }, >>> + { >>> + .temp = 0x20, >>> + .pwm = 0x23, >>> + }, >>> + { >>> + .temp = 0x22, >>> + .pwm = 0x28, >>> + }, >>> + { >>> + .temp = 0x24, >>> + .pwm = 0x32, >>> + }, >>> + { >>> + .temp = 0x27, >>> + .pwm = 0x48, >>> + }, >>> + { >>> + .temp = 0x29, >>> + .pwm = 0x64, >>> + }, >>> +}; >>> + >>> +struct curve_point extreme_curve[] = { >>> + { >>> + .temp = 0x19, >>> + .pwm = 0x28, >>> + }, >>> + { >>> + .temp = 0x1B, >>> + .pwm = 0x2E, >>> + }, >>> + { >>> + .temp = 0x1D, >>> + .pwm = 0x37, >>> + }, >>> + { >>> + .temp = 0x1E, >>> + .pwm = 0x41, >>> + }, >>> + { >>> + .temp = 0x1F, >>> + .pwm = 0x4C, >>> + }, >>> + { >>> + .temp = 0x20, >>> + .pwm = 0x56, >>> + }, >>> + { >>> + .temp = 0x21, >>> + .pwm = 0x64, >>> + }, >>> +}; >>> + >>> +#define default_curve quiet_curve >>> + >>> +enum opcodes { >>> + PWM_FAN_CURVE_CMD = 0x40, >>> + PWM_GET_CURRENT_CMD = 0x41, >>> + PWM_FAN_TARGET_CMD = 0x42, >>> + RPM_FAN_TARGET_CMD = 0x43, >>> +}; >>> + >>> +#define SUCCES_LENGTH 3 >>> +#define SUCCES_CODE (0x12, 0x34) >>> +static const char SUCCESS[SUCCES_LENGTH - 1] = { 0x12, 0x34 }; >>> + >>> +static bool check_succes(enum opcodes command, char ret[SUCCES_LENGTH]) >>> +{ >>> + char success[SUCCES_LENGTH] = { command, SUCCES_CODE }; >>> + >>> + return strncmp(ret, success, SUCCES_LENGTH) == 0; >>> +} >>> + >>> +int set_fan_pwm_curve(struct hydro_i_pro_device *hdev, >>> + struct hwmon_fan_data *fan_data, >>> + struct curve_point point[7]) >>> +{ >>> + int retval; >>> + int wrote; >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); >>> + unsigned char *send_buf = hdev->bulk_out_buffer; >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; >>> + >>> + memcpy(fan_data->curve, point, sizeof(fan_data->curve)); >>> + >>> + send_buf[0] = PWM_FAN_CURVE_CMD; >>> + send_buf[1] = fan_data->fan_channel; >>> + send_buf[2] = point[0].temp; >>> + send_buf[3] = point[1].temp; >>> + send_buf[4] = point[2].temp; >>> + send_buf[5] = point[3].temp; >>> + send_buf[6] = point[4].temp; >>> + send_buf[7] = point[5].temp; >>> + send_buf[8] = point[6].temp; >>> + send_buf[9] = point[0].pwm; >>> + send_buf[10] = point[1].pwm; >>> + send_buf[11] = point[2].pwm; >>> + send_buf[12] = point[3].pwm; >>> + send_buf[13] = point[4].pwm; >>> + send_buf[14] = point[5].pwm; >>> + send_buf[15] = point[6].pwm; >>> + >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 16, &wrote, 100); >>> + if (retval != 0) >>> + return retval; >>> + >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 4, &wrote, 100); >>> + if (retval != 0) >>> + return retval; >>> + >>> + if (!check_succes(send_buf[0], recv_buf)) { >>> + dev_info(&hdev->udev->dev, >>> + "[*] failed setting fan curve %d,%d,%d/%d\n", >>> + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); >>> + return -EINVAL; >>> + } >>> + return 0; >>> +} >>> + >>> +int set_fan_target_rpm(struct hydro_i_pro_device *hdev, >>> + struct hwmon_fan_data *fan_data, long val) >>> +{ >>> + int retval; >>> + int wrote; >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); >>> + >>> + unsigned char *send_buf = hdev->bulk_out_buffer; >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; >>> + >>> + fan_data->fan_target = val; >>> + fan_data->fan_pwm_target = 0; >>> + >>> + send_buf[0] = RPM_FAN_TARGET_CMD; >>> + send_buf[1] = fan_data->fan_channel; >>> + send_buf[2] = (fan_data->fan_target >> 8); >>> + send_buf[3] = fan_data->fan_target; >>> + >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); >>> + if (retval != 0) >>> + return retval; >>> + >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100); >>> + if (retval != 0) >>> + return retval; >>> + >>> + if (!check_succes(send_buf[0], recv_buf)) { >>> + dev_info(&hdev->udev->dev, >>> + "[*] failed setting fan rpm %d,%d,%d/%d\n", >>> + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); >>> + return -EINVAL; >>> + } >>> + return 0; >>> +} >>> + >>> +int get_fan_current_rpm(struct hydro_i_pro_device *hdev, >>> + struct hwmon_fan_data *fan_data, long *val) >>> +{ >>> + int retval; >>> + int wrote; >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); >>> + >>> + unsigned char *send_buf = hdev->bulk_out_buffer; >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; >>> + >>> + send_buf[0] = PWM_GET_CURRENT_CMD; >>> + send_buf[1] = fan_data->fan_channel; >>> + >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 2, &wrote, 100); >>> + if (retval != 0) >>> + return retval; >>> + >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100); >>> + if (retval != 0) >>> + return retval; >>> + >>> + if (!check_succes(send_buf[0], recv_buf) || >>> + recv_buf[3] != fan_data->fan_channel) { >>> + dev_info(&hdev->udev->dev, >>> + "[*] failed retrieving fan rmp %d,%d,%d/%d\n", >>> + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); >>> + return -EINVAL; >>> + } >>> + >>> + *val = ((recv_buf[4]) << 8) + recv_buf[5]; >>> + return 0; >>> +} >>> + >>> +int set_fan_target_pwm(struct hydro_i_pro_device *hdev, >>> + struct hwmon_fan_data *fan_data, long val) >>> +{ >>> + int retval; >>> + int wrote; >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); >>> + >>> + unsigned char *send_buf = hdev->bulk_out_buffer; >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; >>> + >>> + fan_data->fan_pwm_target = val; >>> + fan_data->fan_target = 0; >>> + >>> + send_buf[0] = PWM_FAN_TARGET_CMD; >>> + send_buf[1] = fan_data->fan_channel; >>> + send_buf[3] = fan_data->fan_pwm_target; >>> + >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); >>> + if (retval != 0) >>> + return retval; >>> + >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000); >>> + if (retval != 0) >>> + return retval; >>> + >>> + if (!check_succes(send_buf[0], recv_buf)) { >>> + dev_info(&hdev->udev->dev, >>> + "[*] failed setting fan pwm %d,%d,%d/%d\n", >>> + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); >>> + return -EINVAL; >>> + } >>> + return 0; >>> +} >>> + >>> +umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, u32 attr, >>> + int channel) >>> +{ >>> + switch (type) { >>> + case hwmon_fan: >>> + switch (attr) { >>> + case hwmon_fan_input: >>> + return 0444; >>> + break; >>> + case hwmon_fan_target: >>> + return 0644; >>> + break; >>> + case hwmon_fan_min: >>> + return 0444; >>> + break; >>> + default: >>> + break; >>> + } >>> + break; >>> + case hwmon_pwm: >>> + switch (attr) { >>> + case hwmon_pwm_input: >>> + return 0200; >>> + break; >>> + case hwmon_pwm_enable: >>> + return 0644; >>> + break; >>> + default: >>> + break; >>> + } >>> + break; >>> + default: >>> + break; >>> + } >>> + return 0; >>> +} >>> + >>> +static int hwmon_write(struct device *dev, enum hwmon_sensor_types type, >>> + u32 attr, int channel, long val) >>> +{ >>> + struct hwmon_data *data = dev_get_drvdata(dev); >>> + struct hydro_i_pro_device *hdev = data->hdev; >>> + struct hwmon_fan_data *fan_data; >>> + int retval = 0; >>> + >>> + switch (type) { >>> + case hwmon_fan: >>> + switch (attr) { >>> + case hwmon_fan_target: >>> + fan_data = data->channel_data[channel]; >>> + if (fan_data->mode != 1) >>> + return -EINVAL; >>> + >>> + retval = usb_autopm_get_interface(hdev->interface); >>> + if (retval) >>> + goto exit; >>> + >>> + if (down_trylock(&hdev->limit_sem)) { >>> + retval = -EAGAIN; >>> + goto cleanup_interface; >>> + } >>> + >>> + retval = set_fan_target_rpm(hdev, fan_data, val); >>> + if (retval) >>> + goto cleanup; >>> + >>> + break; >>> + default: >>> + return -EINVAL; >>> + } >>> + goto exit; >>> + case hwmon_pwm: >>> + switch (attr) { >>> + case hwmon_pwm_input: >>> + fan_data = data->channel_data[channel]; >>> + if (fan_data->mode != 1) >>> + return -EINVAL; >>> + >>> + retval = usb_autopm_get_interface(hdev->interface); >>> + if (retval) >>> + goto exit; >>> + >>> + if (down_trylock(&hdev->limit_sem)) { >>> + retval = -EAGAIN; >>> + goto cleanup_interface; >>> + } >>> + >>> + retval = set_fan_target_pwm(hdev, fan_data, val); >>> + if (retval) >>> + goto cleanup; >>> + >>> + break; >>> + case hwmon_pwm_enable: >>> + fan_data = data->channel_data[channel]; >>> + >>> + retval = usb_autopm_get_interface(hdev->interface); >>> + if (retval) >>> + goto exit; >>> + >>> + if (down_trylock(&hdev->limit_sem)) { >>> + retval = -EAGAIN; >>> + goto cleanup_interface; >>> + } >>> + fan_data->mode = val; >>> + >>> + switch (val) { >>> + case 0: >>> + set_fan_pwm_curve(hdev, fan_data, >>> + default_curve); >>> + break; >>> + case 1: >>> + if (fan_data->fan_target != 0) { >>> + retval = set_fan_target_rpm( >>> + hdev, fan_data, >>> + fan_data->fan_target); >>> + if (retval) >>> + goto cleanup; >>> + } else if (fan_data->fan_pwm_target != 0) { >>> + retval = set_fan_target_pwm( >>> + hdev, fan_data, >>> + fan_data->fan_pwm_target); >>> + if (retval) >>> + goto cleanup; >>> + } >>> + break; >>> + case 2: >>> + set_fan_pwm_curve(hdev, fan_data, quiet_curve); >>> + break; >>> + case 3: >>> + set_fan_pwm_curve(hdev, fan_data, >>> + balanced_curve); >>> + break; >>> + case 4: >>> + set_fan_pwm_curve(hdev, fan_data, >>> + extreme_curve); >>> + break; >>> + } >>> + break; >>> + default: >>> + return -EINVAL; >>> + } >>> + goto exit; >>> + default: >>> + return -EINVAL; >>> + } >>> + >>> +cleanup: >>> + up(&hdev->limit_sem); >>> +cleanup_interface: >>> + usb_autopm_put_interface(hdev->interface); >>> +exit: >>> + return retval; >>> +} >>> + >>> +int hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, >>> + int channel, long *val) >>> +{ >>> + struct hwmon_data *data = dev_get_drvdata(dev); >>> + struct hydro_i_pro_device *hdev = data->hdev; >>> + struct hwmon_fan_data *fan_data; >>> + int retval = 0; >>> + >>> + if (channel >= data->channel_count) >>> + return -EAGAIN; >>> + >>> + switch (type) { >>> + case hwmon_fan: >>> + switch (attr) { >>> + case hwmon_fan_input: >>> + fan_data = data->channel_data[channel]; >>> + >>> + retval = usb_autopm_get_interface(hdev->interface); >>> + if (retval) >>> + goto exit; >>> + >>> + if (down_trylock(&hdev->limit_sem)) { >>> + retval = -EAGAIN; >>> + goto cleanup_interface; >>> + } >>> + >>> + retval = get_fan_current_rpm(hdev, fan_data, val); >>> + if (retval) >>> + goto cleanup; >>> + >>> + goto cleanup; >>> + case hwmon_fan_target: >>> + fan_data = data->channel_data[channel]; >>> + if (fan_data->mode != 1) { >>> + *val = 0; >>> + goto exit; >>> + } >>> + *val = fan_data->fan_target; >>> + goto exit; >>> + case hwmon_fan_min: >>> + *val = 200; >>> + goto exit; >>> + >>> + default: >>> + return -EINVAL; >>> + } >>> + goto exit; >>> + >>> + case hwmon_pwm: >>> + switch (attr) { >>> + case hwmon_pwm_enable: >>> + fan_data = data->channel_data[channel]; >>> + *val = fan_data->mode; >>> + goto exit; >>> + default: >>> + return -EINVAL; >>> + } >>> + goto exit; >>> + >>> + default: >>> + return -EINVAL; >>> + } >>> + >>> +cleanup: >>> + up(&hdev->limit_sem); >>> +cleanup_interface: >>> + usb_autopm_put_interface(hdev->interface); >>> +exit: >>> + return retval; >>> +} >>> + >>> +#define fan_config (HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN) >>> +#define pwm_config (HWMON_PWM_INPUT | HWMON_PWM_ENABLE) >>> + >>> +static const struct hwmon_ops i_pro_ops = { >>> + .is_visible = hwmon_is_visible, >>> + .read = hwmon_read, >>> + .write = hwmon_write, >>> +}; >>> + >>> +bool does_fan_exist(struct hydro_i_pro_device *hdev, int channel) >>> +{ >>> + int retval; >>> + int wrote; >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); >>> + >>> + unsigned char *send_buf = hdev->bulk_out_buffer; >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; >>> + >>> + send_buf[0] = RPM_FAN_TARGET_CMD; >>> + send_buf[1] = channel; >>> + send_buf[2] = (600 >> 8); >>> + send_buf[3] = (unsigned char)600; >>> + >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); >>> + if (retval != 0) >>> + return false; >>> + >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000); >>> + if (retval != 0) >>> + return false; >>> + >>> + if (!check_succes(send_buf[0], recv_buf)) >>> + return false; >>> + return true; >>> +} >>> + >>> +int get_fan_count(struct hydro_i_pro_device *hdev) >>> +{ >>> + int fan; >>> + >>> + for (fan = 0; does_fan_exist(hdev, fan); fan += 1) >>> + ; >>> + return fan; >>> +} >>> + >>> +void hwmon_init(struct hydro_i_pro_device *hdev) >>> +{ >>> + int fan_id; >>> + struct device *hwmon_dev; >>> + struct hwmon_fan_data *fan; >>> + struct hwmon_data *data = devm_kzalloc( >>> + &hdev->udev->dev, sizeof(struct hwmon_data), GFP_KERNEL); >>> + struct hwmon_chip_info *hwmon_info = devm_kzalloc( >>> + &hdev->udev->dev, sizeof(struct hwmon_chip_info), GFP_KERNEL); >>> + //Allocate the info table >>> + struct hwmon_channel_info **aio_info = >>> + devm_kzalloc(&hdev->udev->dev, >>> + sizeof(struct hwmon_channel_info *) * 2, >>> + GFP_KERNEL); //2 for each channel info. >>> + >>> + //Allocate the fan and PWM configuration >>> + u32 *fans_config = devm_kzalloc(&hdev->udev->dev, >>> + sizeof(u32) * (data->channel_count + 1), >>> + GFP_KERNEL); >>> + u32 *pwms_config = devm_kzalloc(&hdev->udev->dev, >>> + sizeof(u32) * (data->channel_count + 1), >>> + GFP_KERNEL); >>> + >>> + data->channel_count = get_fan_count(hdev); //amount of fans >>> + data->channel_data = >>> + devm_kzalloc(&hdev->udev->dev, >>> + sizeof(char *) * data->channel_count, GFP_KERNEL); >>> + >>> + //For each fan create a data channel a fan config entry and a pwm config entry >>> + for (fan_id = 0; fan_id <= data->channel_count; fan_id++) { >>> + fan = devm_kzalloc(&hdev->udev->dev, >>> + sizeof(struct hwmon_fan_data), GFP_KERNEL); >>> + fan->fan_channel = fan_id; >>> + fan->mode = 2; >>> + data->channel_data[fan_id] = fan; >>> + fans_config[fan_id] = fan_config; >>> + pwms_config[fan_id] = pwm_config; >>> + } >>> + fans_config[data->channel_count] = 0; >>> + pwms_config[data->channel_count] = 0; >>> + >>> + aio_info[0] = >>> + devm_kzalloc(&hdev->udev->dev, >>> + sizeof(struct hwmon_channel_info), GFP_KERNEL); >>> + aio_info[0]->type = hwmon_fan; >>> + aio_info[0]->config = fans_config; >>> + >>> + aio_info[1] = >>> + devm_kzalloc(&hdev->udev->dev, >>> + sizeof(struct hwmon_channel_info), GFP_KERNEL); >>> + aio_info[1]->type = hwmon_pwm; >>> + aio_info[1]->config = pwms_config; >>> + >>> + hwmon_info->ops = &i_pro_ops; >>> + hwmon_info->info = (const struct hwmon_channel_info **)aio_info; >>> + >>> + data->hdev = hdev; >>> + hwmon_dev = devm_hwmon_device_register_with_info( >>> + &hdev->udev->dev, "driver_fan", data, hwmon_info, NULL); >>> + dev_info(&hdev->udev->dev, "[*] Setup hwmon\n"); >>> +} >>> + >>> +/* >>> + * Devices that work with this driver. >>> + * More devices should work, however none have been tested. >>> + */ >>> +static const struct usb_device_id astk_table[] = { >>> + { USB_DEVICE(0x1b1c, 0x0c15) }, >>> + {}, >>> +}; >>> + >>> +MODULE_DEVICE_TABLE(usb, astk_table); >>> + >>> +int init_device(struct usb_device *udev) >>> +{ >>> + int retval; >>> + >>> + //This is needed because when running windows in a vm with proprietary driver >>> + //and you switch to this driver, the device will not respond unless you run this. >>> + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x40, >>> + 0xffff, 0x0000, 0, 0, 0); >>> + //this always returns error >>> + if (retval != 0) >>> + ; >>> + >>> + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, >>> + 0x0002, 0x0000, 0, 0, 0); >>> + return retval; >>> +} >>> + >>> +int deinit_device(struct usb_device *udev) >>> +{ >>> + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, >>> + 0x0004, 0x0000, 0, 0, 0); >>> +} >>> + >>> +static void astk_delete(struct hydro_i_pro_device *hdev) >>> +{ >>> + usb_put_intf(hdev->interface); >>> + usb_put_dev(hdev->udev); >>> + kfree(hdev->bulk_in_buffer); >>> + kfree(hdev->bulk_out_buffer); >>> + kfree(hdev); >>> +} >>> + >>> +static int astk_probe(struct usb_interface *interface, >>> + const struct usb_device_id *id) >>> +{ >>> + struct hydro_i_pro_device *hdev; >>> + int retval; >>> + struct usb_endpoint_descriptor *bulk_in, *bulk_out; >>> + >>> + hdev = kzalloc(sizeof(*hdev), GFP_KERNEL); >>> + if (!hdev) { >>> + retval = -ENOMEM; >>> + goto exit; >>> + } >>> + >>> + retval = usb_find_common_endpoints(interface->cur_altsetting, &bulk_in, >>> + &bulk_out, NULL, NULL); >>> + if (retval != 0) >>> + goto exit; >>> + >>> + hdev->udev = usb_get_dev(interface_to_usbdev(interface)); >>> + hdev->interface = usb_get_intf(interface); >>> + >>> + /* set up the endpoint information */ >>> + /* use only the first bulk-in and bulk-out endpoints */ >>> + hdev->bulk_in_size = usb_endpoint_maxp(bulk_in); >>> + hdev->bulk_in_buffer = kmalloc(hdev->bulk_in_size, GFP_KERNEL); >>> + hdev->bulk_in_endpointAddr = bulk_in->bEndpointAddress; >>> + hdev->bulk_out_size = usb_endpoint_maxp(bulk_out); >>> + hdev->bulk_out_buffer = kmalloc(hdev->bulk_out_size, GFP_KERNEL); >>> + hdev->bulk_out_endpointAddr = bulk_out->bEndpointAddress; >>> + >>> + retval = init_device(hdev->udev); >>> + if (retval) { >>> + dev_err(&interface->dev, "failed initialising this device.\n"); >>> + goto exit; >>> + } >>> + >>> + hwmon_init(hdev); >>> + >>> + usb_set_intfdata(interface, hdev); >>> + sema_init(&hdev->limit_sem, 8); >>> +exit: >>> + return retval; >>> +} >>> + >>> +static void astk_disconnect(struct usb_interface *interface) >>> +{ >>> + struct hydro_i_pro_device *hdev = usb_get_intfdata(interface); >>> + >>> + dev_info(&hdev->udev->dev, "[*] DEINIT DEVICE\n"); >>> + usb_set_intfdata(interface, NULL); >>> + astk_delete(hdev); >>> + deinit_device(hdev->udev); >>> +} >>> +static int astk_resume(struct usb_interface *intf) >>> +{ >>> + return 0; >>> +} >>> + >>> +static int astk_suspend(struct usb_interface *intf, pm_message_t message) >>> +{ >>> + return 0; >>> +} >>> + >>> +static struct usb_driver hydro_i_pro_driver = { >>> + .name = "hydro_i_pro_device", >>> + .id_table = astk_table, >>> + .probe = astk_probe, >>> + .disconnect = astk_disconnect, >>> + .resume = astk_resume, >>> + .suspend = astk_suspend, >>> + .supports_autosuspend = 1, >>> +}; >>> + >>> +static int __init hydro_i_pro_init(void) >>> +{ >>> + return usb_register(&hydro_i_pro_driver); >>> +} >>> + >>> +static void __exit hydro_i_pro_exit(void) >>> +{ >>> + usb_deregister(&hydro_i_pro_driver); >>> +} >>> + >>> +module_init(hydro_i_pro_init); >>> +module_exit(hydro_i_pro_exit); >>> + >>> +MODULE_LICENSE("GPL"); >>> +MODULE_AUTHOR("Jaap Aarts <jaap.aarts1@gmail.com>"); >>> +MODULE_DESCRIPTION("Corsair HXXXi pro device driver"); >>> >>
On Sat, 18 Jul 2020 at 17:10, Guenter Roeck <linux@roeck-us.net> wrote: > > On 7/18/20 2:33 AM, jaap aarts wrote: > > On Sat, 18 Jul 2020 at 01:15, Guenter Roeck <linux@roeck-us.net> wrote: > >> > >> On 7/17/20 5:16 AM, jaap aarts wrote: > >>> Adds fan/pwm support for H100i platinum. > >>> Custom temp/fan curves are not supported, however > >>> the presets found in the proprietary drivers are available. > >>> > >>> Signed-off-by: Jaap Aarts <jaap.aarts1@gmail.com> > >> > >> Most of my comments have not been addressed. > > > > I replied to your comments, everything I mentioned as fixed/changed > > has been addressed in this new patch. You didn't respond to that any > > further even though you did reply to my other email. So I thought I > > was supposed to just send in v2. > > > > This is incorrect. I did say, for example, that I won't accept things > like setting fan curves, and that the driver should provide sets of > {temperature, pwm} attributes instead. I replied to this comment saying at least a default was needed for setting pwm{1-*}_enable to 0, I didnt get any response on that so I could not make a decision on what to so about this. > There are several other comments > which were not addressed, such as not using C++ comments I replied asking what exactly C++ comments are. I think you mean C++ style comments, which i can easily find out what they are, I tried googling C++ comments and that does not give any useful information. > and using "if (retval)" instead of "if (retval != 0)". I asked if it was ok to be more verbose, I personally prefer to not treat ints as boolean values. Asyou had not replied yet I did not see purpose in changing this. > There is still a 100-second timeout. This is indeed my bad, there were a lot small changes im sorry I missed one. > I didn't check any further, but I think that > is sufficient to say that several of my comments were not addressed. > > >> Change log is missing. > > > > I don't know what you mean, I have a from line, I have a one-line > > description of the patch, the email subject just like some other > > patches, I have a multi-line description, and a signed-off-by line. > > According to the linux docs > > (https://www.kernel.org/doc/html/latest/process/5.Posting.html?highlight=changelog#patch-formatting-and-changelogs) > > This is what a changelog should be. > > If you mean changelog from v1, I mailed about all the fixed/changed > > things in this patch. I also send a follow-up email noting that after > > some research I found out that this driver should NOT work with > > all asetek gen6 based coolers, and that I changed the scope of > > the driver to just a single line of corsair products. > > > > I don't see anything along the line of > > v2: > - made this change > - made that change > > in this patch. I have not read anything about that in the documentation, for V3 I will add a changelog. > >> 0-day feedback has not been adressed. > > > > True, I did not fix all of those, I wasn't sure how to take all of them > > since it was a long list. > > I am not entirely sure how to respond to that. What would be the point > of reviewing the code if a simple compile and sanity check reveals > several errors, and you state yourself that you did not fix them all ? My code compiled without warnings, the linux format checker told me to put "()" around my `#define SUCCES_CODE 0x12, 0x34`. I had no idea this would cause anything to change, I was under the understanding this was just nice syntax-wise so I didn't try to recompile. (it's a format checker after all, format doesn't change compiler output.) I can send in V3 with all the 0-day problems fixed and remove `()` around the define? That would be a pretty insignificant change but if you prefer that I am ok with that. > Guenter > > > The rest of the 0-day feedback will be fixed next round. > > > >> > >> Guenter > > > > > >> > >>> --- > >>> drivers/hwmon/Kconfig | 6 + > >>> drivers/hwmon/Makefile | 1 + > >>> drivers/hwmon/corsair_hydro_i_pro.c | 791 ++++++++++++++++++++++++++++ > >>> 3 files changed, 798 insertions(+) > >>> create mode 100644 drivers/hwmon/corsair_hydro_i_pro.c > >>> > >>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > >>> index 288ae9f63588..9831a40fb05f 100644 > >>> --- a/drivers/hwmon/Kconfig > >>> +++ b/drivers/hwmon/Kconfig > >>> @@ -378,6 +378,12 @@ config SENSORS_ARM_SCPI > >>> and power sensors available on ARM Ltd's SCP based platforms. The > >>> actual number and type of sensors exported depend on the platform. > >>> > >>> +config SENSORS_CORSAIR_HYDRO_I_PRO > >>> + tristate "Corsair hydro HXXXi pro driver" > >>> + help > >>> + If you say yes here you get support for the corsair hydro HXXXi pro > >>> + range of devices. > >>> + > >>> config SENSORS_ASB100 > >>> tristate "Asus ASB100 Bach" > >>> depends on X86 && I2C > >>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > >>> index 3e32c21f5efe..ec63294b3ef1 100644 > >>> --- a/drivers/hwmon/Makefile > >>> +++ b/drivers/hwmon/Makefile > >>> @@ -20,6 +20,7 @@ obj-$(CONFIG_SENSORS_W83793) += w83793.o > >>> obj-$(CONFIG_SENSORS_W83795) += w83795.o > >>> obj-$(CONFIG_SENSORS_W83781D) += w83781d.o > >>> obj-$(CONFIG_SENSORS_W83791D) += w83791d.o > >>> +obj-$(CONFIG_SENSORS_CORSAIR_HYDRO_I_PRO) += corsair_hydro_i_pro.o > >>> > >>> obj-$(CONFIG_SENSORS_AB8500) += abx500.o ab8500.o > >>> obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o > >>> diff --git a/drivers/hwmon/corsair_hydro_i_pro.c b/drivers/hwmon/corsair_hydro_i_pro.c > >>> new file mode 100644 > >>> index 000000000000..43bf52d8d365 > >>> --- /dev/null > >>> +++ b/drivers/hwmon/corsair_hydro_i_pro.c > >>> @@ -0,0 +1,791 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-or-later > >>> +/* > >>> + * A hwmon driver for all corsair hyxro HXXXi pro all-in-one liquid coolers. > >>> + * Copyright (c) Jaap Aarts 2020 > >>> + * > >>> + * Protocol reverse engineered by audiohacked > >>> + * https://github.com/audiohacked/OpendriverLink > >>> + */ > >>> + > >>> +/* > >>> + * Supports following liquid coolers: > >>> + * H100i platinum > >>> + * > >>> + * Other products should work with this driver but no testing has been done. > >>> + * > >>> + * Note: platinum is the codename name for pro within the driver, so H100i platinum = H100i pro. > >>> + * But some products are actually calles platinum, these are not intended to be supported. > >>> + * > >>> + * Note: fan curve control has not been implemented > >>> + */ > >>> +#include <linux/errno.h> > >>> +#include <linux/hwmon.h> > >>> +#include <linux/kernel.h> > >>> +#include <linux/module.h> > >>> +#include <linux/slab.h> > >>> +#include <linux/usb.h> > >>> + > >>> +struct hydro_i_pro_device { > >>> + struct usb_device *udev; > >>> + > >>> + unsigned char *bulk_out_buffer; > >>> + char *bulk_in_buffer; > >>> + size_t bulk_out_size; > >>> + size_t bulk_in_size; > >>> + char bulk_in_endpointAddr; > >>> + char bulk_out_endpointAddr; > >>> + > >>> + struct usb_interface *interface; /* the interface for this device */ > >>> + struct semaphore > >>> + limit_sem; /* limiting the number of writes in progress */ > >>> +}; > >>> + > >>> +struct curve_point { > >>> + uint8_t temp; > >>> + uint8_t pwm; > >>> +}; > >>> + > >>> +struct hwmon_fan_data { > >>> + char fan_channel; > >>> + long fan_target; > >>> + unsigned char fan_pwm_target; > >>> + long mode; > >>> + struct curve_point curve[7]; > >>> +}; > >>> + > >>> +struct hwmon_data { > >>> + struct hydro_i_pro_device *hdev; > >>> + int channel_count; > >>> + void **channel_data; > >>> +}; > >>> + > >>> +struct curve_point quiet_curve[] = { > >>> + { > >>> + .temp = 0x1F, > >>> + .pwm = 0x15, > >>> + }, > >>> + { > >>> + .temp = 0x21, > >>> + .pwm = 0x1E, > >>> + }, > >>> + { > >>> + .temp = 0x24, > >>> + .pwm = 0x25, > >>> + }, > >>> + { > >>> + .temp = 0x27, > >>> + .pwm = 0x2D, > >>> + }, > >>> + { > >>> + .temp = 0x29, > >>> + .pwm = 0x38, > >>> + }, > >>> + { > >>> + .temp = 0x2C, > >>> + .pwm = 0x4A, > >>> + }, > >>> + { > >>> + .temp = 0x2F, > >>> + .pwm = 0x64, > >>> + }, > >>> +}; > >>> + > >>> +struct curve_point balanced_curve[] = { > >>> + { > >>> + .temp = 0x1C, > >>> + .pwm = 0x15, > >>> + }, > >>> + { > >>> + .temp = 0x1E, > >>> + .pwm = 0x1B, > >>> + }, > >>> + { > >>> + .temp = 0x20, > >>> + .pwm = 0x23, > >>> + }, > >>> + { > >>> + .temp = 0x22, > >>> + .pwm = 0x28, > >>> + }, > >>> + { > >>> + .temp = 0x24, > >>> + .pwm = 0x32, > >>> + }, > >>> + { > >>> + .temp = 0x27, > >>> + .pwm = 0x48, > >>> + }, > >>> + { > >>> + .temp = 0x29, > >>> + .pwm = 0x64, > >>> + }, > >>> +}; > >>> + > >>> +struct curve_point extreme_curve[] = { > >>> + { > >>> + .temp = 0x19, > >>> + .pwm = 0x28, > >>> + }, > >>> + { > >>> + .temp = 0x1B, > >>> + .pwm = 0x2E, > >>> + }, > >>> + { > >>> + .temp = 0x1D, > >>> + .pwm = 0x37, > >>> + }, > >>> + { > >>> + .temp = 0x1E, > >>> + .pwm = 0x41, > >>> + }, > >>> + { > >>> + .temp = 0x1F, > >>> + .pwm = 0x4C, > >>> + }, > >>> + { > >>> + .temp = 0x20, > >>> + .pwm = 0x56, > >>> + }, > >>> + { > >>> + .temp = 0x21, > >>> + .pwm = 0x64, > >>> + }, > >>> +}; > >>> + > >>> +#define default_curve quiet_curve > >>> + > >>> +enum opcodes { > >>> + PWM_FAN_CURVE_CMD = 0x40, > >>> + PWM_GET_CURRENT_CMD = 0x41, > >>> + PWM_FAN_TARGET_CMD = 0x42, > >>> + RPM_FAN_TARGET_CMD = 0x43, > >>> +}; > >>> + > >>> +#define SUCCES_LENGTH 3 > >>> +#define SUCCES_CODE (0x12, 0x34) > >>> +static const char SUCCESS[SUCCES_LENGTH - 1] = { 0x12, 0x34 }; > >>> + > >>> +static bool check_succes(enum opcodes command, char ret[SUCCES_LENGTH]) > >>> +{ > >>> + char success[SUCCES_LENGTH] = { command, SUCCES_CODE }; > >>> + > >>> + return strncmp(ret, success, SUCCES_LENGTH) == 0; > >>> +} > >>> + > >>> +int set_fan_pwm_curve(struct hydro_i_pro_device *hdev, > >>> + struct hwmon_fan_data *fan_data, > >>> + struct curve_point point[7]) > >>> +{ > >>> + int retval; > >>> + int wrote; > >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > >>> + unsigned char *send_buf = hdev->bulk_out_buffer; > >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; > >>> + > >>> + memcpy(fan_data->curve, point, sizeof(fan_data->curve)); > >>> + > >>> + send_buf[0] = PWM_FAN_CURVE_CMD; > >>> + send_buf[1] = fan_data->fan_channel; > >>> + send_buf[2] = point[0].temp; > >>> + send_buf[3] = point[1].temp; > >>> + send_buf[4] = point[2].temp; > >>> + send_buf[5] = point[3].temp; > >>> + send_buf[6] = point[4].temp; > >>> + send_buf[7] = point[5].temp; > >>> + send_buf[8] = point[6].temp; > >>> + send_buf[9] = point[0].pwm; > >>> + send_buf[10] = point[1].pwm; > >>> + send_buf[11] = point[2].pwm; > >>> + send_buf[12] = point[3].pwm; > >>> + send_buf[13] = point[4].pwm; > >>> + send_buf[14] = point[5].pwm; > >>> + send_buf[15] = point[6].pwm; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 16, &wrote, 100); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 4, &wrote, 100); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + if (!check_succes(send_buf[0], recv_buf)) { > >>> + dev_info(&hdev->udev->dev, > >>> + "[*] failed setting fan curve %d,%d,%d/%d\n", > >>> + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > >>> + return -EINVAL; > >>> + } > >>> + return 0; > >>> +} > >>> + > >>> +int set_fan_target_rpm(struct hydro_i_pro_device *hdev, > >>> + struct hwmon_fan_data *fan_data, long val) > >>> +{ > >>> + int retval; > >>> + int wrote; > >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > >>> + > >>> + unsigned char *send_buf = hdev->bulk_out_buffer; > >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; > >>> + > >>> + fan_data->fan_target = val; > >>> + fan_data->fan_pwm_target = 0; > >>> + > >>> + send_buf[0] = RPM_FAN_TARGET_CMD; > >>> + send_buf[1] = fan_data->fan_channel; > >>> + send_buf[2] = (fan_data->fan_target >> 8); > >>> + send_buf[3] = fan_data->fan_target; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + if (!check_succes(send_buf[0], recv_buf)) { > >>> + dev_info(&hdev->udev->dev, > >>> + "[*] failed setting fan rpm %d,%d,%d/%d\n", > >>> + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > >>> + return -EINVAL; > >>> + } > >>> + return 0; > >>> +} > >>> + > >>> +int get_fan_current_rpm(struct hydro_i_pro_device *hdev, > >>> + struct hwmon_fan_data *fan_data, long *val) > >>> +{ > >>> + int retval; > >>> + int wrote; > >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > >>> + > >>> + unsigned char *send_buf = hdev->bulk_out_buffer; > >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; > >>> + > >>> + send_buf[0] = PWM_GET_CURRENT_CMD; > >>> + send_buf[1] = fan_data->fan_channel; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 2, &wrote, 100); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + if (!check_succes(send_buf[0], recv_buf) || > >>> + recv_buf[3] != fan_data->fan_channel) { > >>> + dev_info(&hdev->udev->dev, > >>> + "[*] failed retrieving fan rmp %d,%d,%d/%d\n", > >>> + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > >>> + return -EINVAL; > >>> + } > >>> + > >>> + *val = ((recv_buf[4]) << 8) + recv_buf[5]; > >>> + return 0; > >>> +} > >>> + > >>> +int set_fan_target_pwm(struct hydro_i_pro_device *hdev, > >>> + struct hwmon_fan_data *fan_data, long val) > >>> +{ > >>> + int retval; > >>> + int wrote; > >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > >>> + > >>> + unsigned char *send_buf = hdev->bulk_out_buffer; > >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; > >>> + > >>> + fan_data->fan_pwm_target = val; > >>> + fan_data->fan_target = 0; > >>> + > >>> + send_buf[0] = PWM_FAN_TARGET_CMD; > >>> + send_buf[1] = fan_data->fan_channel; > >>> + send_buf[3] = fan_data->fan_pwm_target; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + if (!check_succes(send_buf[0], recv_buf)) { > >>> + dev_info(&hdev->udev->dev, > >>> + "[*] failed setting fan pwm %d,%d,%d/%d\n", > >>> + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > >>> + return -EINVAL; > >>> + } > >>> + return 0; > >>> +} > >>> + > >>> +umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, u32 attr, > >>> + int channel) > >>> +{ > >>> + switch (type) { > >>> + case hwmon_fan: > >>> + switch (attr) { > >>> + case hwmon_fan_input: > >>> + return 0444; > >>> + break; > >>> + case hwmon_fan_target: > >>> + return 0644; > >>> + break; > >>> + case hwmon_fan_min: > >>> + return 0444; > >>> + break; > >>> + default: > >>> + break; > >>> + } > >>> + break; > >>> + case hwmon_pwm: > >>> + switch (attr) { > >>> + case hwmon_pwm_input: > >>> + return 0200; > >>> + break; > >>> + case hwmon_pwm_enable: > >>> + return 0644; > >>> + break; > >>> + default: > >>> + break; > >>> + } > >>> + break; > >>> + default: > >>> + break; > >>> + } > >>> + return 0; > >>> +} > >>> + > >>> +static int hwmon_write(struct device *dev, enum hwmon_sensor_types type, > >>> + u32 attr, int channel, long val) > >>> +{ > >>> + struct hwmon_data *data = dev_get_drvdata(dev); > >>> + struct hydro_i_pro_device *hdev = data->hdev; > >>> + struct hwmon_fan_data *fan_data; > >>> + int retval = 0; > >>> + > >>> + switch (type) { > >>> + case hwmon_fan: > >>> + switch (attr) { > >>> + case hwmon_fan_target: > >>> + fan_data = data->channel_data[channel]; > >>> + if (fan_data->mode != 1) > >>> + return -EINVAL; > >>> + > >>> + retval = usb_autopm_get_interface(hdev->interface); > >>> + if (retval) > >>> + goto exit; > >>> + > >>> + if (down_trylock(&hdev->limit_sem)) { > >>> + retval = -EAGAIN; > >>> + goto cleanup_interface; > >>> + } > >>> + > >>> + retval = set_fan_target_rpm(hdev, fan_data, val); > >>> + if (retval) > >>> + goto cleanup; > >>> + > >>> + break; > >>> + default: > >>> + return -EINVAL; > >>> + } > >>> + goto exit; > >>> + case hwmon_pwm: > >>> + switch (attr) { > >>> + case hwmon_pwm_input: > >>> + fan_data = data->channel_data[channel]; > >>> + if (fan_data->mode != 1) > >>> + return -EINVAL; > >>> + > >>> + retval = usb_autopm_get_interface(hdev->interface); > >>> + if (retval) > >>> + goto exit; > >>> + > >>> + if (down_trylock(&hdev->limit_sem)) { > >>> + retval = -EAGAIN; > >>> + goto cleanup_interface; > >>> + } > >>> + > >>> + retval = set_fan_target_pwm(hdev, fan_data, val); > >>> + if (retval) > >>> + goto cleanup; > >>> + > >>> + break; > >>> + case hwmon_pwm_enable: > >>> + fan_data = data->channel_data[channel]; > >>> + > >>> + retval = usb_autopm_get_interface(hdev->interface); > >>> + if (retval) > >>> + goto exit; > >>> + > >>> + if (down_trylock(&hdev->limit_sem)) { > >>> + retval = -EAGAIN; > >>> + goto cleanup_interface; > >>> + } > >>> + fan_data->mode = val; > >>> + > >>> + switch (val) { > >>> + case 0: > >>> + set_fan_pwm_curve(hdev, fan_data, > >>> + default_curve); > >>> + break; > >>> + case 1: > >>> + if (fan_data->fan_target != 0) { > >>> + retval = set_fan_target_rpm( > >>> + hdev, fan_data, > >>> + fan_data->fan_target); > >>> + if (retval) > >>> + goto cleanup; > >>> + } else if (fan_data->fan_pwm_target != 0) { > >>> + retval = set_fan_target_pwm( > >>> + hdev, fan_data, > >>> + fan_data->fan_pwm_target); > >>> + if (retval) > >>> + goto cleanup; > >>> + } > >>> + break; > >>> + case 2: > >>> + set_fan_pwm_curve(hdev, fan_data, quiet_curve); > >>> + break; > >>> + case 3: > >>> + set_fan_pwm_curve(hdev, fan_data, > >>> + balanced_curve); > >>> + break; > >>> + case 4: > >>> + set_fan_pwm_curve(hdev, fan_data, > >>> + extreme_curve); > >>> + break; > >>> + } > >>> + break; > >>> + default: > >>> + return -EINVAL; > >>> + } > >>> + goto exit; > >>> + default: > >>> + return -EINVAL; > >>> + } > >>> + > >>> +cleanup: > >>> + up(&hdev->limit_sem); > >>> +cleanup_interface: > >>> + usb_autopm_put_interface(hdev->interface); > >>> +exit: > >>> + return retval; > >>> +} > >>> + > >>> +int hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, > >>> + int channel, long *val) > >>> +{ > >>> + struct hwmon_data *data = dev_get_drvdata(dev); > >>> + struct hydro_i_pro_device *hdev = data->hdev; > >>> + struct hwmon_fan_data *fan_data; > >>> + int retval = 0; > >>> + > >>> + if (channel >= data->channel_count) > >>> + return -EAGAIN; > >>> + > >>> + switch (type) { > >>> + case hwmon_fan: > >>> + switch (attr) { > >>> + case hwmon_fan_input: > >>> + fan_data = data->channel_data[channel]; > >>> + > >>> + retval = usb_autopm_get_interface(hdev->interface); > >>> + if (retval) > >>> + goto exit; > >>> + > >>> + if (down_trylock(&hdev->limit_sem)) { > >>> + retval = -EAGAIN; > >>> + goto cleanup_interface; > >>> + } > >>> + > >>> + retval = get_fan_current_rpm(hdev, fan_data, val); > >>> + if (retval) > >>> + goto cleanup; > >>> + > >>> + goto cleanup; > >>> + case hwmon_fan_target: > >>> + fan_data = data->channel_data[channel]; > >>> + if (fan_data->mode != 1) { > >>> + *val = 0; > >>> + goto exit; > >>> + } > >>> + *val = fan_data->fan_target; > >>> + goto exit; > >>> + case hwmon_fan_min: > >>> + *val = 200; > >>> + goto exit; > >>> + > >>> + default: > >>> + return -EINVAL; > >>> + } > >>> + goto exit; > >>> + > >>> + case hwmon_pwm: > >>> + switch (attr) { > >>> + case hwmon_pwm_enable: > >>> + fan_data = data->channel_data[channel]; > >>> + *val = fan_data->mode; > >>> + goto exit; > >>> + default: > >>> + return -EINVAL; > >>> + } > >>> + goto exit; > >>> + > >>> + default: > >>> + return -EINVAL; > >>> + } > >>> + > >>> +cleanup: > >>> + up(&hdev->limit_sem); > >>> +cleanup_interface: > >>> + usb_autopm_put_interface(hdev->interface); > >>> +exit: > >>> + return retval; > >>> +} > >>> + > >>> +#define fan_config (HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN) > >>> +#define pwm_config (HWMON_PWM_INPUT | HWMON_PWM_ENABLE) > >>> + > >>> +static const struct hwmon_ops i_pro_ops = { > >>> + .is_visible = hwmon_is_visible, > >>> + .read = hwmon_read, > >>> + .write = hwmon_write, > >>> +}; > >>> + > >>> +bool does_fan_exist(struct hydro_i_pro_device *hdev, int channel) > >>> +{ > >>> + int retval; > >>> + int wrote; > >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > >>> + > >>> + unsigned char *send_buf = hdev->bulk_out_buffer; > >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; > >>> + > >>> + send_buf[0] = RPM_FAN_TARGET_CMD; > >>> + send_buf[1] = channel; > >>> + send_buf[2] = (600 >> 8); > >>> + send_buf[3] = (unsigned char)600; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > >>> + if (retval != 0) > >>> + return false; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000); > >>> + if (retval != 0) > >>> + return false; > >>> + > >>> + if (!check_succes(send_buf[0], recv_buf)) > >>> + return false; > >>> + return true; > >>> +} > >>> + > >>> +int get_fan_count(struct hydro_i_pro_device *hdev) > >>> +{ > >>> + int fan; > >>> + > >>> + for (fan = 0; does_fan_exist(hdev, fan); fan += 1) > >>> + ; > >>> + return fan; > >>> +} > >>> + > >>> +void hwmon_init(struct hydro_i_pro_device *hdev) > >>> +{ > >>> + int fan_id; > >>> + struct device *hwmon_dev; > >>> + struct hwmon_fan_data *fan; > >>> + struct hwmon_data *data = devm_kzalloc( > >>> + &hdev->udev->dev, sizeof(struct hwmon_data), GFP_KERNEL); > >>> + struct hwmon_chip_info *hwmon_info = devm_kzalloc( > >>> + &hdev->udev->dev, sizeof(struct hwmon_chip_info), GFP_KERNEL); > >>> + //Allocate the info table > >>> + struct hwmon_channel_info **aio_info = > >>> + devm_kzalloc(&hdev->udev->dev, > >>> + sizeof(struct hwmon_channel_info *) * 2, > >>> + GFP_KERNEL); //2 for each channel info. > >>> + > >>> + //Allocate the fan and PWM configuration > >>> + u32 *fans_config = devm_kzalloc(&hdev->udev->dev, > >>> + sizeof(u32) * (data->channel_count + 1), > >>> + GFP_KERNEL); > >>> + u32 *pwms_config = devm_kzalloc(&hdev->udev->dev, > >>> + sizeof(u32) * (data->channel_count + 1), > >>> + GFP_KERNEL); > >>> + > >>> + data->channel_count = get_fan_count(hdev); //amount of fans > >>> + data->channel_data = > >>> + devm_kzalloc(&hdev->udev->dev, > >>> + sizeof(char *) * data->channel_count, GFP_KERNEL); > >>> + > >>> + //For each fan create a data channel a fan config entry and a pwm config entry > >>> + for (fan_id = 0; fan_id <= data->channel_count; fan_id++) { > >>> + fan = devm_kzalloc(&hdev->udev->dev, > >>> + sizeof(struct hwmon_fan_data), GFP_KERNEL); > >>> + fan->fan_channel = fan_id; > >>> + fan->mode = 2; > >>> + data->channel_data[fan_id] = fan; > >>> + fans_config[fan_id] = fan_config; > >>> + pwms_config[fan_id] = pwm_config; > >>> + } > >>> + fans_config[data->channel_count] = 0; > >>> + pwms_config[data->channel_count] = 0; > >>> + > >>> + aio_info[0] = > >>> + devm_kzalloc(&hdev->udev->dev, > >>> + sizeof(struct hwmon_channel_info), GFP_KERNEL); > >>> + aio_info[0]->type = hwmon_fan; > >>> + aio_info[0]->config = fans_config; > >>> + > >>> + aio_info[1] = > >>> + devm_kzalloc(&hdev->udev->dev, > >>> + sizeof(struct hwmon_channel_info), GFP_KERNEL); > >>> + aio_info[1]->type = hwmon_pwm; > >>> + aio_info[1]->config = pwms_config; > >>> + > >>> + hwmon_info->ops = &i_pro_ops; > >>> + hwmon_info->info = (const struct hwmon_channel_info **)aio_info; > >>> + > >>> + data->hdev = hdev; > >>> + hwmon_dev = devm_hwmon_device_register_with_info( > >>> + &hdev->udev->dev, "driver_fan", data, hwmon_info, NULL); > >>> + dev_info(&hdev->udev->dev, "[*] Setup hwmon\n"); > >>> +} > >>> + > >>> +/* > >>> + * Devices that work with this driver. > >>> + * More devices should work, however none have been tested. > >>> + */ > >>> +static const struct usb_device_id astk_table[] = { > >>> + { USB_DEVICE(0x1b1c, 0x0c15) }, > >>> + {}, > >>> +}; > >>> + > >>> +MODULE_DEVICE_TABLE(usb, astk_table); > >>> + > >>> +int init_device(struct usb_device *udev) > >>> +{ > >>> + int retval; > >>> + > >>> + //This is needed because when running windows in a vm with proprietary driver > >>> + //and you switch to this driver, the device will not respond unless you run this. > >>> + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x40, > >>> + 0xffff, 0x0000, 0, 0, 0); > >>> + //this always returns error > >>> + if (retval != 0) > >>> + ; > >>> + > >>> + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, > >>> + 0x0002, 0x0000, 0, 0, 0); > >>> + return retval; > >>> +} > >>> + > >>> +int deinit_device(struct usb_device *udev) > >>> +{ > >>> + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, > >>> + 0x0004, 0x0000, 0, 0, 0); > >>> +} > >>> + > >>> +static void astk_delete(struct hydro_i_pro_device *hdev) > >>> +{ > >>> + usb_put_intf(hdev->interface); > >>> + usb_put_dev(hdev->udev); > >>> + kfree(hdev->bulk_in_buffer); > >>> + kfree(hdev->bulk_out_buffer); > >>> + kfree(hdev); > >>> +} > >>> + > >>> +static int astk_probe(struct usb_interface *interface, > >>> + const struct usb_device_id *id) > >>> +{ > >>> + struct hydro_i_pro_device *hdev; > >>> + int retval; > >>> + struct usb_endpoint_descriptor *bulk_in, *bulk_out; > >>> + > >>> + hdev = kzalloc(sizeof(*hdev), GFP_KERNEL); > >>> + if (!hdev) { > >>> + retval = -ENOMEM; > >>> + goto exit; > >>> + } > >>> + > >>> + retval = usb_find_common_endpoints(interface->cur_altsetting, &bulk_in, > >>> + &bulk_out, NULL, NULL); > >>> + if (retval != 0) > >>> + goto exit; > >>> + > >>> + hdev->udev = usb_get_dev(interface_to_usbdev(interface)); > >>> + hdev->interface = usb_get_intf(interface); > >>> + > >>> + /* set up the endpoint information */ > >>> + /* use only the first bulk-in and bulk-out endpoints */ > >>> + hdev->bulk_in_size = usb_endpoint_maxp(bulk_in); > >>> + hdev->bulk_in_buffer = kmalloc(hdev->bulk_in_size, GFP_KERNEL); > >>> + hdev->bulk_in_endpointAddr = bulk_in->bEndpointAddress; > >>> + hdev->bulk_out_size = usb_endpoint_maxp(bulk_out); > >>> + hdev->bulk_out_buffer = kmalloc(hdev->bulk_out_size, GFP_KERNEL); > >>> + hdev->bulk_out_endpointAddr = bulk_out->bEndpointAddress; > >>> + > >>> + retval = init_device(hdev->udev); > >>> + if (retval) { > >>> + dev_err(&interface->dev, "failed initialising this device.\n"); > >>> + goto exit; > >>> + } > >>> + > >>> + hwmon_init(hdev); > >>> + > >>> + usb_set_intfdata(interface, hdev); > >>> + sema_init(&hdev->limit_sem, 8); > >>> +exit: > >>> + return retval; > >>> +} > >>> + > >>> +static void astk_disconnect(struct usb_interface *interface) > >>> +{ > >>> + struct hydro_i_pro_device *hdev = usb_get_intfdata(interface); > >>> + > >>> + dev_info(&hdev->udev->dev, "[*] DEINIT DEVICE\n"); > >>> + usb_set_intfdata(interface, NULL); > >>> + astk_delete(hdev); > >>> + deinit_device(hdev->udev); > >>> +} > >>> +static int astk_resume(struct usb_interface *intf) > >>> +{ > >>> + return 0; > >>> +} > >>> + > >>> +static int astk_suspend(struct usb_interface *intf, pm_message_t message) > >>> +{ > >>> + return 0; > >>> +} > >>> + > >>> +static struct usb_driver hydro_i_pro_driver = { > >>> + .name = "hydro_i_pro_device", > >>> + .id_table = astk_table, > >>> + .probe = astk_probe, > >>> + .disconnect = astk_disconnect, > >>> + .resume = astk_resume, > >>> + .suspend = astk_suspend, > >>> + .supports_autosuspend = 1, > >>> +}; > >>> + > >>> +static int __init hydro_i_pro_init(void) > >>> +{ > >>> + return usb_register(&hydro_i_pro_driver); > >>> +} > >>> + > >>> +static void __exit hydro_i_pro_exit(void) > >>> +{ > >>> + usb_deregister(&hydro_i_pro_driver); > >>> +} > >>> + > >>> +module_init(hydro_i_pro_init); > >>> +module_exit(hydro_i_pro_exit); > >>> + > >>> +MODULE_LICENSE("GPL"); > >>> +MODULE_AUTHOR("Jaap Aarts <jaap.aarts1@gmail.com>"); > >>> +MODULE_DESCRIPTION("Corsair HXXXi pro device driver"); > >>> > >> >
Hi jaap,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on hwmon/hwmon-next]
[also build test ERROR on v5.8-rc5 next-20200717]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/jaap-aarts/hwmon-add-fan-pwm-driver-for-corsair-h100i-platinum/20200717-201923
base: https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
config: xtensa-randconfig-r011-20200719 (attached as .config)
compiler: xtensa-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=xtensa
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>, old ones prefixed by <<):
>> ERROR: modpost: "usb_deregister" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined!
>> ERROR: modpost: "usb_register_driver" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined!
>> ERROR: modpost: "usb_put_dev" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined!
>> ERROR: modpost: "usb_put_intf" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined!
>> ERROR: modpost: "usb_get_intf" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined!
>> ERROR: modpost: "usb_get_dev" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined!
>> ERROR: modpost: "usb_find_common_endpoints" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined!
>> ERROR: modpost: "usb_control_msg" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined!
>> ERROR: modpost: "usb_autopm_put_interface" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined!
>> ERROR: modpost: "usb_autopm_get_interface" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined!
>> ERROR: modpost: "usb_bulk_msg" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined!
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
I tried to reproduce this, but I got the error: xtensa-linux-gcc: error: missing argument to '-Wframe-larger-than=' at the last step using the provided config. Jaap Aarts On Sun, 19 Jul 2020 at 02:31, kernel test robot <lkp@intel.com> wrote: > > Hi jaap, > > Thank you for the patch! Yet something to improve: > > [auto build test ERROR on hwmon/hwmon-next] > [also build test ERROR on v5.8-rc5 next-20200717] > [If your patch is applied to the wrong git tree, kindly drop us a note. > And when submitting patch, we suggest to use '--base' as documented in > https://git-scm.com/docs/git-format-patch] > > url: https://github.com/0day-ci/linux/commits/jaap-aarts/hwmon-add-fan-pwm-driver-for-corsair-h100i-platinum/20200717-201923 > base: https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next > config: xtensa-randconfig-r011-20200719 (attached as .config) > compiler: xtensa-linux-gcc (GCC) 9.3.0 > reproduce (this is a W=1 build): > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross > chmod +x ~/bin/make.cross > # save the attached .config to linux build tree > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=xtensa > > If you fix the issue, kindly add following tag as appropriate > Reported-by: kernel test robot <lkp@intel.com> > > All errors (new ones prefixed by >>, old ones prefixed by <<): > > >> ERROR: modpost: "usb_deregister" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined! > >> ERROR: modpost: "usb_register_driver" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined! > >> ERROR: modpost: "usb_put_dev" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined! > >> ERROR: modpost: "usb_put_intf" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined! > >> ERROR: modpost: "usb_get_intf" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined! > >> ERROR: modpost: "usb_get_dev" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined! > >> ERROR: modpost: "usb_find_common_endpoints" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined! > >> ERROR: modpost: "usb_control_msg" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined! > >> ERROR: modpost: "usb_autopm_put_interface" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined! > >> ERROR: modpost: "usb_autopm_get_interface" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined! > >> ERROR: modpost: "usb_bulk_msg" [drivers/hwmon/corsair_hydro_i_pro.ko] undefined! > > --- > 0-DAY CI Kernel Test Service, Intel Corporation > https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
Hello Guenter, Is there still interest in this driver? I got a way of not needing the dynamic clusterfuck in `hwmon_init` and could send in v3 with that, the 0day issues fixed and remove the 100s timeout. I send this message in private by accident, sorry about that. Jaap Aarts On Sat, 18 Jul 2020 at 17:10, Guenter Roeck <linux@roeck-us.net> wrote: > > On 7/18/20 2:33 AM, jaap aarts wrote: > > On Sat, 18 Jul 2020 at 01:15, Guenter Roeck <linux@roeck-us.net> wrote: > >> > >> On 7/17/20 5:16 AM, jaap aarts wrote: > >>> Adds fan/pwm support for H100i platinum. > >>> Custom temp/fan curves are not supported, however > >>> the presets found in the proprietary drivers are available. > >>> > >>> Signed-off-by: Jaap Aarts <jaap.aarts1@gmail.com> > >> > >> Most of my comments have not been addressed. > > > > I replied to your comments, everything I mentioned as fixed/changed > > has been addressed in this new patch. You didn't respond to that any > > further even though you did reply to my other email. So I thought I > > was supposed to just send in v2. > > > > This is incorrect. I did say, for example, that I won't accept things > like setting fan curves, and that the driver should provide sets of > {temperature, pwm} attributes instead. There are several other comments > which were not addressed, such as not using C++ comments and using > "if (retval)" instead of "if (retval != 0)". There is still a > 100-second timeout. I didn't check any further, but I think that > is sufficient to say that several of my comments were not addressed. > > >> Change log is missing. > > > > I don't know what you mean, I have a from line, I have a one-line > > description of the patch, the email subject just like some other > > patches, I have a multi-line description, and a signed-off-by line. > > According to the linux docs > > (https://www.kernel.org/doc/html/latest/process/5.Posting.html?highlight=changelog#patch-formatting-and-changelogs) > > This is what a changelog should be. > > If you mean changelog from v1, I mailed about all the fixed/changed > > things in this patch. I also send a follow-up email noting that after > > some research I found out that this driver should NOT work with > > all asetek gen6 based coolers, and that I changed the scope of > > the driver to just a single line of corsair products. > > > > I don't see anything along the line of > > v2: > - made this change > - made that change > > in this patch. > > >> 0-day feedback has not been adressed. > > > > True, I did not fix all of those, I wasn't sure how to take all of them > > since it was a long list. > > I am not entirely sure how to respond to that. What would be the point > of reviewing the code if a simple compile and sanity check reveals > several errors, and you state yourself that you did not fix them all ? > > Guenter > > > The rest of the 0-day feedback will be fixed next round. > > > >> > >> Guenter > > > > > >> > >>> --- > >>> drivers/hwmon/Kconfig | 6 + > >>> drivers/hwmon/Makefile | 1 + > >>> drivers/hwmon/corsair_hydro_i_pro.c | 791 ++++++++++++++++++++++++++++ > >>> 3 files changed, 798 insertions(+) > >>> create mode 100644 drivers/hwmon/corsair_hydro_i_pro.c > >>> > >>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > >>> index 288ae9f63588..9831a40fb05f 100644 > >>> --- a/drivers/hwmon/Kconfig > >>> +++ b/drivers/hwmon/Kconfig > >>> @@ -378,6 +378,12 @@ config SENSORS_ARM_SCPI > >>> and power sensors available on ARM Ltd's SCP based platforms. The > >>> actual number and type of sensors exported depend on the platform. > >>> > >>> +config SENSORS_CORSAIR_HYDRO_I_PRO > >>> + tristate "Corsair hydro HXXXi pro driver" > >>> + help > >>> + If you say yes here you get support for the corsair hydro HXXXi pro > >>> + range of devices. > >>> + > >>> config SENSORS_ASB100 > >>> tristate "Asus ASB100 Bach" > >>> depends on X86 && I2C > >>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > >>> index 3e32c21f5efe..ec63294b3ef1 100644 > >>> --- a/drivers/hwmon/Makefile > >>> +++ b/drivers/hwmon/Makefile > >>> @@ -20,6 +20,7 @@ obj-$(CONFIG_SENSORS_W83793) += w83793.o > >>> obj-$(CONFIG_SENSORS_W83795) += w83795.o > >>> obj-$(CONFIG_SENSORS_W83781D) += w83781d.o > >>> obj-$(CONFIG_SENSORS_W83791D) += w83791d.o > >>> +obj-$(CONFIG_SENSORS_CORSAIR_HYDRO_I_PRO) += corsair_hydro_i_pro.o > >>> > >>> obj-$(CONFIG_SENSORS_AB8500) += abx500.o ab8500.o > >>> obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o > >>> diff --git a/drivers/hwmon/corsair_hydro_i_pro.c b/drivers/hwmon/corsair_hydro_i_pro.c > >>> new file mode 100644 > >>> index 000000000000..43bf52d8d365 > >>> --- /dev/null > >>> +++ b/drivers/hwmon/corsair_hydro_i_pro.c > >>> @@ -0,0 +1,791 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-or-later > >>> +/* > >>> + * A hwmon driver for all corsair hyxro HXXXi pro all-in-one liquid coolers. > >>> + * Copyright (c) Jaap Aarts 2020 > >>> + * > >>> + * Protocol reverse engineered by audiohacked > >>> + * https://github.com/audiohacked/OpendriverLink > >>> + */ > >>> + > >>> +/* > >>> + * Supports following liquid coolers: > >>> + * H100i platinum > >>> + * > >>> + * Other products should work with this driver but no testing has been done. > >>> + * > >>> + * Note: platinum is the codename name for pro within the driver, so H100i platinum = H100i pro. > >>> + * But some products are actually calles platinum, these are not intended to be supported. > >>> + * > >>> + * Note: fan curve control has not been implemented > >>> + */ > >>> +#include <linux/errno.h> > >>> +#include <linux/hwmon.h> > >>> +#include <linux/kernel.h> > >>> +#include <linux/module.h> > >>> +#include <linux/slab.h> > >>> +#include <linux/usb.h> > >>> + > >>> +struct hydro_i_pro_device { > >>> + struct usb_device *udev; > >>> + > >>> + unsigned char *bulk_out_buffer; > >>> + char *bulk_in_buffer; > >>> + size_t bulk_out_size; > >>> + size_t bulk_in_size; > >>> + char bulk_in_endpointAddr; > >>> + char bulk_out_endpointAddr; > >>> + > >>> + struct usb_interface *interface; /* the interface for this device */ > >>> + struct semaphore > >>> + limit_sem; /* limiting the number of writes in progress */ > >>> +}; > >>> + > >>> +struct curve_point { > >>> + uint8_t temp; > >>> + uint8_t pwm; > >>> +}; > >>> + > >>> +struct hwmon_fan_data { > >>> + char fan_channel; > >>> + long fan_target; > >>> + unsigned char fan_pwm_target; > >>> + long mode; > >>> + struct curve_point curve[7]; > >>> +}; > >>> + > >>> +struct hwmon_data { > >>> + struct hydro_i_pro_device *hdev; > >>> + int channel_count; > >>> + void **channel_data; > >>> +}; > >>> + > >>> +struct curve_point quiet_curve[] = { > >>> + { > >>> + .temp = 0x1F, > >>> + .pwm = 0x15, > >>> + }, > >>> + { > >>> + .temp = 0x21, > >>> + .pwm = 0x1E, > >>> + }, > >>> + { > >>> + .temp = 0x24, > >>> + .pwm = 0x25, > >>> + }, > >>> + { > >>> + .temp = 0x27, > >>> + .pwm = 0x2D, > >>> + }, > >>> + { > >>> + .temp = 0x29, > >>> + .pwm = 0x38, > >>> + }, > >>> + { > >>> + .temp = 0x2C, > >>> + .pwm = 0x4A, > >>> + }, > >>> + { > >>> + .temp = 0x2F, > >>> + .pwm = 0x64, > >>> + }, > >>> +}; > >>> + > >>> +struct curve_point balanced_curve[] = { > >>> + { > >>> + .temp = 0x1C, > >>> + .pwm = 0x15, > >>> + }, > >>> + { > >>> + .temp = 0x1E, > >>> + .pwm = 0x1B, > >>> + }, > >>> + { > >>> + .temp = 0x20, > >>> + .pwm = 0x23, > >>> + }, > >>> + { > >>> + .temp = 0x22, > >>> + .pwm = 0x28, > >>> + }, > >>> + { > >>> + .temp = 0x24, > >>> + .pwm = 0x32, > >>> + }, > >>> + { > >>> + .temp = 0x27, > >>> + .pwm = 0x48, > >>> + }, > >>> + { > >>> + .temp = 0x29, > >>> + .pwm = 0x64, > >>> + }, > >>> +}; > >>> + > >>> +struct curve_point extreme_curve[] = { > >>> + { > >>> + .temp = 0x19, > >>> + .pwm = 0x28, > >>> + }, > >>> + { > >>> + .temp = 0x1B, > >>> + .pwm = 0x2E, > >>> + }, > >>> + { > >>> + .temp = 0x1D, > >>> + .pwm = 0x37, > >>> + }, > >>> + { > >>> + .temp = 0x1E, > >>> + .pwm = 0x41, > >>> + }, > >>> + { > >>> + .temp = 0x1F, > >>> + .pwm = 0x4C, > >>> + }, > >>> + { > >>> + .temp = 0x20, > >>> + .pwm = 0x56, > >>> + }, > >>> + { > >>> + .temp = 0x21, > >>> + .pwm = 0x64, > >>> + }, > >>> +}; > >>> + > >>> +#define default_curve quiet_curve > >>> + > >>> +enum opcodes { > >>> + PWM_FAN_CURVE_CMD = 0x40, > >>> + PWM_GET_CURRENT_CMD = 0x41, > >>> + PWM_FAN_TARGET_CMD = 0x42, > >>> + RPM_FAN_TARGET_CMD = 0x43, > >>> +}; > >>> + > >>> +#define SUCCES_LENGTH 3 > >>> +#define SUCCES_CODE (0x12, 0x34) > >>> +static const char SUCCESS[SUCCES_LENGTH - 1] = { 0x12, 0x34 }; > >>> + > >>> +static bool check_succes(enum opcodes command, char ret[SUCCES_LENGTH]) > >>> +{ > >>> + char success[SUCCES_LENGTH] = { command, SUCCES_CODE }; > >>> + > >>> + return strncmp(ret, success, SUCCES_LENGTH) == 0; > >>> +} > >>> + > >>> +int set_fan_pwm_curve(struct hydro_i_pro_device *hdev, > >>> + struct hwmon_fan_data *fan_data, > >>> + struct curve_point point[7]) > >>> +{ > >>> + int retval; > >>> + int wrote; > >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > >>> + unsigned char *send_buf = hdev->bulk_out_buffer; > >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; > >>> + > >>> + memcpy(fan_data->curve, point, sizeof(fan_data->curve)); > >>> + > >>> + send_buf[0] = PWM_FAN_CURVE_CMD; > >>> + send_buf[1] = fan_data->fan_channel; > >>> + send_buf[2] = point[0].temp; > >>> + send_buf[3] = point[1].temp; > >>> + send_buf[4] = point[2].temp; > >>> + send_buf[5] = point[3].temp; > >>> + send_buf[6] = point[4].temp; > >>> + send_buf[7] = point[5].temp; > >>> + send_buf[8] = point[6].temp; > >>> + send_buf[9] = point[0].pwm; > >>> + send_buf[10] = point[1].pwm; > >>> + send_buf[11] = point[2].pwm; > >>> + send_buf[12] = point[3].pwm; > >>> + send_buf[13] = point[4].pwm; > >>> + send_buf[14] = point[5].pwm; > >>> + send_buf[15] = point[6].pwm; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 16, &wrote, 100); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 4, &wrote, 100); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + if (!check_succes(send_buf[0], recv_buf)) { > >>> + dev_info(&hdev->udev->dev, > >>> + "[*] failed setting fan curve %d,%d,%d/%d\n", > >>> + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > >>> + return -EINVAL; > >>> + } > >>> + return 0; > >>> +} > >>> + > >>> +int set_fan_target_rpm(struct hydro_i_pro_device *hdev, > >>> + struct hwmon_fan_data *fan_data, long val) > >>> +{ > >>> + int retval; > >>> + int wrote; > >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > >>> + > >>> + unsigned char *send_buf = hdev->bulk_out_buffer; > >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; > >>> + > >>> + fan_data->fan_target = val; > >>> + fan_data->fan_pwm_target = 0; > >>> + > >>> + send_buf[0] = RPM_FAN_TARGET_CMD; > >>> + send_buf[1] = fan_data->fan_channel; > >>> + send_buf[2] = (fan_data->fan_target >> 8); > >>> + send_buf[3] = fan_data->fan_target; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + if (!check_succes(send_buf[0], recv_buf)) { > >>> + dev_info(&hdev->udev->dev, > >>> + "[*] failed setting fan rpm %d,%d,%d/%d\n", > >>> + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > >>> + return -EINVAL; > >>> + } > >>> + return 0; > >>> +} > >>> + > >>> +int get_fan_current_rpm(struct hydro_i_pro_device *hdev, > >>> + struct hwmon_fan_data *fan_data, long *val) > >>> +{ > >>> + int retval; > >>> + int wrote; > >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > >>> + > >>> + unsigned char *send_buf = hdev->bulk_out_buffer; > >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; > >>> + > >>> + send_buf[0] = PWM_GET_CURRENT_CMD; > >>> + send_buf[1] = fan_data->fan_channel; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 2, &wrote, 100); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + if (!check_succes(send_buf[0], recv_buf) || > >>> + recv_buf[3] != fan_data->fan_channel) { > >>> + dev_info(&hdev->udev->dev, > >>> + "[*] failed retrieving fan rmp %d,%d,%d/%d\n", > >>> + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > >>> + return -EINVAL; > >>> + } > >>> + > >>> + *val = ((recv_buf[4]) << 8) + recv_buf[5]; > >>> + return 0; > >>> +} > >>> + > >>> +int set_fan_target_pwm(struct hydro_i_pro_device *hdev, > >>> + struct hwmon_fan_data *fan_data, long val) > >>> +{ > >>> + int retval; > >>> + int wrote; > >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > >>> + > >>> + unsigned char *send_buf = hdev->bulk_out_buffer; > >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; > >>> + > >>> + fan_data->fan_pwm_target = val; > >>> + fan_data->fan_target = 0; > >>> + > >>> + send_buf[0] = PWM_FAN_TARGET_CMD; > >>> + send_buf[1] = fan_data->fan_channel; > >>> + send_buf[3] = fan_data->fan_pwm_target; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000); > >>> + if (retval != 0) > >>> + return retval; > >>> + > >>> + if (!check_succes(send_buf[0], recv_buf)) { > >>> + dev_info(&hdev->udev->dev, > >>> + "[*] failed setting fan pwm %d,%d,%d/%d\n", > >>> + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > >>> + return -EINVAL; > >>> + } > >>> + return 0; > >>> +} > >>> + > >>> +umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, u32 attr, > >>> + int channel) > >>> +{ > >>> + switch (type) { > >>> + case hwmon_fan: > >>> + switch (attr) { > >>> + case hwmon_fan_input: > >>> + return 0444; > >>> + break; > >>> + case hwmon_fan_target: > >>> + return 0644; > >>> + break; > >>> + case hwmon_fan_min: > >>> + return 0444; > >>> + break; > >>> + default: > >>> + break; > >>> + } > >>> + break; > >>> + case hwmon_pwm: > >>> + switch (attr) { > >>> + case hwmon_pwm_input: > >>> + return 0200; > >>> + break; > >>> + case hwmon_pwm_enable: > >>> + return 0644; > >>> + break; > >>> + default: > >>> + break; > >>> + } > >>> + break; > >>> + default: > >>> + break; > >>> + } > >>> + return 0; > >>> +} > >>> + > >>> +static int hwmon_write(struct device *dev, enum hwmon_sensor_types type, > >>> + u32 attr, int channel, long val) > >>> +{ > >>> + struct hwmon_data *data = dev_get_drvdata(dev); > >>> + struct hydro_i_pro_device *hdev = data->hdev; > >>> + struct hwmon_fan_data *fan_data; > >>> + int retval = 0; > >>> + > >>> + switch (type) { > >>> + case hwmon_fan: > >>> + switch (attr) { > >>> + case hwmon_fan_target: > >>> + fan_data = data->channel_data[channel]; > >>> + if (fan_data->mode != 1) > >>> + return -EINVAL; > >>> + > >>> + retval = usb_autopm_get_interface(hdev->interface); > >>> + if (retval) > >>> + goto exit; > >>> + > >>> + if (down_trylock(&hdev->limit_sem)) { > >>> + retval = -EAGAIN; > >>> + goto cleanup_interface; > >>> + } > >>> + > >>> + retval = set_fan_target_rpm(hdev, fan_data, val); > >>> + if (retval) > >>> + goto cleanup; > >>> + > >>> + break; > >>> + default: > >>> + return -EINVAL; > >>> + } > >>> + goto exit; > >>> + case hwmon_pwm: > >>> + switch (attr) { > >>> + case hwmon_pwm_input: > >>> + fan_data = data->channel_data[channel]; > >>> + if (fan_data->mode != 1) > >>> + return -EINVAL; > >>> + > >>> + retval = usb_autopm_get_interface(hdev->interface); > >>> + if (retval) > >>> + goto exit; > >>> + > >>> + if (down_trylock(&hdev->limit_sem)) { > >>> + retval = -EAGAIN; > >>> + goto cleanup_interface; > >>> + } > >>> + > >>> + retval = set_fan_target_pwm(hdev, fan_data, val); > >>> + if (retval) > >>> + goto cleanup; > >>> + > >>> + break; > >>> + case hwmon_pwm_enable: > >>> + fan_data = data->channel_data[channel]; > >>> + > >>> + retval = usb_autopm_get_interface(hdev->interface); > >>> + if (retval) > >>> + goto exit; > >>> + > >>> + if (down_trylock(&hdev->limit_sem)) { > >>> + retval = -EAGAIN; > >>> + goto cleanup_interface; > >>> + } > >>> + fan_data->mode = val; > >>> + > >>> + switch (val) { > >>> + case 0: > >>> + set_fan_pwm_curve(hdev, fan_data, > >>> + default_curve); > >>> + break; > >>> + case 1: > >>> + if (fan_data->fan_target != 0) { > >>> + retval = set_fan_target_rpm( > >>> + hdev, fan_data, > >>> + fan_data->fan_target); > >>> + if (retval) > >>> + goto cleanup; > >>> + } else if (fan_data->fan_pwm_target != 0) { > >>> + retval = set_fan_target_pwm( > >>> + hdev, fan_data, > >>> + fan_data->fan_pwm_target); > >>> + if (retval) > >>> + goto cleanup; > >>> + } > >>> + break; > >>> + case 2: > >>> + set_fan_pwm_curve(hdev, fan_data, quiet_curve); > >>> + break; > >>> + case 3: > >>> + set_fan_pwm_curve(hdev, fan_data, > >>> + balanced_curve); > >>> + break; > >>> + case 4: > >>> + set_fan_pwm_curve(hdev, fan_data, > >>> + extreme_curve); > >>> + break; > >>> + } > >>> + break; > >>> + default: > >>> + return -EINVAL; > >>> + } > >>> + goto exit; > >>> + default: > >>> + return -EINVAL; > >>> + } > >>> + > >>> +cleanup: > >>> + up(&hdev->limit_sem); > >>> +cleanup_interface: > >>> + usb_autopm_put_interface(hdev->interface); > >>> +exit: > >>> + return retval; > >>> +} > >>> + > >>> +int hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, > >>> + int channel, long *val) > >>> +{ > >>> + struct hwmon_data *data = dev_get_drvdata(dev); > >>> + struct hydro_i_pro_device *hdev = data->hdev; > >>> + struct hwmon_fan_data *fan_data; > >>> + int retval = 0; > >>> + > >>> + if (channel >= data->channel_count) > >>> + return -EAGAIN; > >>> + > >>> + switch (type) { > >>> + case hwmon_fan: > >>> + switch (attr) { > >>> + case hwmon_fan_input: > >>> + fan_data = data->channel_data[channel]; > >>> + > >>> + retval = usb_autopm_get_interface(hdev->interface); > >>> + if (retval) > >>> + goto exit; > >>> + > >>> + if (down_trylock(&hdev->limit_sem)) { > >>> + retval = -EAGAIN; > >>> + goto cleanup_interface; > >>> + } > >>> + > >>> + retval = get_fan_current_rpm(hdev, fan_data, val); > >>> + if (retval) > >>> + goto cleanup; > >>> + > >>> + goto cleanup; > >>> + case hwmon_fan_target: > >>> + fan_data = data->channel_data[channel]; > >>> + if (fan_data->mode != 1) { > >>> + *val = 0; > >>> + goto exit; > >>> + } > >>> + *val = fan_data->fan_target; > >>> + goto exit; > >>> + case hwmon_fan_min: > >>> + *val = 200; > >>> + goto exit; > >>> + > >>> + default: > >>> + return -EINVAL; > >>> + } > >>> + goto exit; > >>> + > >>> + case hwmon_pwm: > >>> + switch (attr) { > >>> + case hwmon_pwm_enable: > >>> + fan_data = data->channel_data[channel]; > >>> + *val = fan_data->mode; > >>> + goto exit; > >>> + default: > >>> + return -EINVAL; > >>> + } > >>> + goto exit; > >>> + > >>> + default: > >>> + return -EINVAL; > >>> + } > >>> + > >>> +cleanup: > >>> + up(&hdev->limit_sem); > >>> +cleanup_interface: > >>> + usb_autopm_put_interface(hdev->interface); > >>> +exit: > >>> + return retval; > >>> +} > >>> + > >>> +#define fan_config (HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN) > >>> +#define pwm_config (HWMON_PWM_INPUT | HWMON_PWM_ENABLE) > >>> + > >>> +static const struct hwmon_ops i_pro_ops = { > >>> + .is_visible = hwmon_is_visible, > >>> + .read = hwmon_read, > >>> + .write = hwmon_write, > >>> +}; > >>> + > >>> +bool does_fan_exist(struct hydro_i_pro_device *hdev, int channel) > >>> +{ > >>> + int retval; > >>> + int wrote; > >>> + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > >>> + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > >>> + > >>> + unsigned char *send_buf = hdev->bulk_out_buffer; > >>> + unsigned char *recv_buf = hdev->bulk_in_buffer; > >>> + > >>> + send_buf[0] = RPM_FAN_TARGET_CMD; > >>> + send_buf[1] = channel; > >>> + send_buf[2] = (600 >> 8); > >>> + send_buf[3] = (unsigned char)600; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > >>> + if (retval != 0) > >>> + return false; > >>> + > >>> + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000); > >>> + if (retval != 0) > >>> + return false; > >>> + > >>> + if (!check_succes(send_buf[0], recv_buf)) > >>> + return false; > >>> + return true; > >>> +} > >>> + > >>> +int get_fan_count(struct hydro_i_pro_device *hdev) > >>> +{ > >>> + int fan; > >>> + > >>> + for (fan = 0; does_fan_exist(hdev, fan); fan += 1) > >>> + ; > >>> + return fan; > >>> +} > >>> + > >>> +void hwmon_init(struct hydro_i_pro_device *hdev) > >>> +{ > >>> + int fan_id; > >>> + struct device *hwmon_dev; > >>> + struct hwmon_fan_data *fan; > >>> + struct hwmon_data *data = devm_kzalloc( > >>> + &hdev->udev->dev, sizeof(struct hwmon_data), GFP_KERNEL); > >>> + struct hwmon_chip_info *hwmon_info = devm_kzalloc( > >>> + &hdev->udev->dev, sizeof(struct hwmon_chip_info), GFP_KERNEL); > >>> + //Allocate the info table > >>> + struct hwmon_channel_info **aio_info = > >>> + devm_kzalloc(&hdev->udev->dev, > >>> + sizeof(struct hwmon_channel_info *) * 2, > >>> + GFP_KERNEL); //2 for each channel info. > >>> + > >>> + //Allocate the fan and PWM configuration > >>> + u32 *fans_config = devm_kzalloc(&hdev->udev->dev, > >>> + sizeof(u32) * (data->channel_count + 1), > >>> + GFP_KERNEL); > >>> + u32 *pwms_config = devm_kzalloc(&hdev->udev->dev, > >>> + sizeof(u32) * (data->channel_count + 1), > >>> + GFP_KERNEL); > >>> + > >>> + data->channel_count = get_fan_count(hdev); //amount of fans > >>> + data->channel_data = > >>> + devm_kzalloc(&hdev->udev->dev, > >>> + sizeof(char *) * data->channel_count, GFP_KERNEL); > >>> + > >>> + //For each fan create a data channel a fan config entry and a pwm config entry > >>> + for (fan_id = 0; fan_id <= data->channel_count; fan_id++) { > >>> + fan = devm_kzalloc(&hdev->udev->dev, > >>> + sizeof(struct hwmon_fan_data), GFP_KERNEL); > >>> + fan->fan_channel = fan_id; > >>> + fan->mode = 2; > >>> + data->channel_data[fan_id] = fan; > >>> + fans_config[fan_id] = fan_config; > >>> + pwms_config[fan_id] = pwm_config; > >>> + } > >>> + fans_config[data->channel_count] = 0; > >>> + pwms_config[data->channel_count] = 0; > >>> + > >>> + aio_info[0] = > >>> + devm_kzalloc(&hdev->udev->dev, > >>> + sizeof(struct hwmon_channel_info), GFP_KERNEL); > >>> + aio_info[0]->type = hwmon_fan; > >>> + aio_info[0]->config = fans_config; > >>> + > >>> + aio_info[1] = > >>> + devm_kzalloc(&hdev->udev->dev, > >>> + sizeof(struct hwmon_channel_info), GFP_KERNEL); > >>> + aio_info[1]->type = hwmon_pwm; > >>> + aio_info[1]->config = pwms_config; > >>> + > >>> + hwmon_info->ops = &i_pro_ops; > >>> + hwmon_info->info = (const struct hwmon_channel_info **)aio_info; > >>> + > >>> + data->hdev = hdev; > >>> + hwmon_dev = devm_hwmon_device_register_with_info( > >>> + &hdev->udev->dev, "driver_fan", data, hwmon_info, NULL); > >>> + dev_info(&hdev->udev->dev, "[*] Setup hwmon\n"); > >>> +} > >>> + > >>> +/* > >>> + * Devices that work with this driver. > >>> + * More devices should work, however none have been tested. > >>> + */ > >>> +static const struct usb_device_id astk_table[] = { > >>> + { USB_DEVICE(0x1b1c, 0x0c15) }, > >>> + {}, > >>> +}; > >>> + > >>> +MODULE_DEVICE_TABLE(usb, astk_table); > >>> + > >>> +int init_device(struct usb_device *udev) > >>> +{ > >>> + int retval; > >>> + > >>> + //This is needed because when running windows in a vm with proprietary driver > >>> + //and you switch to this driver, the device will not respond unless you run this. > >>> + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x40, > >>> + 0xffff, 0x0000, 0, 0, 0); > >>> + //this always returns error > >>> + if (retval != 0) > >>> + ; > >>> + > >>> + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, > >>> + 0x0002, 0x0000, 0, 0, 0); > >>> + return retval; > >>> +} > >>> + > >>> +int deinit_device(struct usb_device *udev) > >>> +{ > >>> + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, > >>> + 0x0004, 0x0000, 0, 0, 0); > >>> +} > >>> + > >>> +static void astk_delete(struct hydro_i_pro_device *hdev) > >>> +{ > >>> + usb_put_intf(hdev->interface); > >>> + usb_put_dev(hdev->udev); > >>> + kfree(hdev->bulk_in_buffer); > >>> + kfree(hdev->bulk_out_buffer); > >>> + kfree(hdev); > >>> +} > >>> + > >>> +static int astk_probe(struct usb_interface *interface, > >>> + const struct usb_device_id *id) > >>> +{ > >>> + struct hydro_i_pro_device *hdev; > >>> + int retval; > >>> + struct usb_endpoint_descriptor *bulk_in, *bulk_out; > >>> + > >>> + hdev = kzalloc(sizeof(*hdev), GFP_KERNEL); > >>> + if (!hdev) { > >>> + retval = -ENOMEM; > >>> + goto exit; > >>> + } > >>> + > >>> + retval = usb_find_common_endpoints(interface->cur_altsetting, &bulk_in, > >>> + &bulk_out, NULL, NULL); > >>> + if (retval != 0) > >>> + goto exit; > >>> + > >>> + hdev->udev = usb_get_dev(interface_to_usbdev(interface)); > >>> + hdev->interface = usb_get_intf(interface); > >>> + > >>> + /* set up the endpoint information */ > >>> + /* use only the first bulk-in and bulk-out endpoints */ > >>> + hdev->bulk_in_size = usb_endpoint_maxp(bulk_in); > >>> + hdev->bulk_in_buffer = kmalloc(hdev->bulk_in_size, GFP_KERNEL); > >>> + hdev->bulk_in_endpointAddr = bulk_in->bEndpointAddress; > >>> + hdev->bulk_out_size = usb_endpoint_maxp(bulk_out); > >>> + hdev->bulk_out_buffer = kmalloc(hdev->bulk_out_size, GFP_KERNEL); > >>> + hdev->bulk_out_endpointAddr = bulk_out->bEndpointAddress; > >>> + > >>> + retval = init_device(hdev->udev); > >>> + if (retval) { > >>> + dev_err(&interface->dev, "failed initialising this device.\n"); > >>> + goto exit; > >>> + } > >>> + > >>> + hwmon_init(hdev); > >>> + > >>> + usb_set_intfdata(interface, hdev); > >>> + sema_init(&hdev->limit_sem, 8); > >>> +exit: > >>> + return retval; > >>> +} > >>> + > >>> +static void astk_disconnect(struct usb_interface *interface) > >>> +{ > >>> + struct hydro_i_pro_device *hdev = usb_get_intfdata(interface); > >>> + > >>> + dev_info(&hdev->udev->dev, "[*] DEINIT DEVICE\n"); > >>> + usb_set_intfdata(interface, NULL); > >>> + astk_delete(hdev); > >>> + deinit_device(hdev->udev); > >>> +} > >>> +static int astk_resume(struct usb_interface *intf) > >>> +{ > >>> + return 0; > >>> +} > >>> + > >>> +static int astk_suspend(struct usb_interface *intf, pm_message_t message) > >>> +{ > >>> + return 0; > >>> +} > >>> + > >>> +static struct usb_driver hydro_i_pro_driver = { > >>> + .name = "hydro_i_pro_device", > >>> + .id_table = astk_table, > >>> + .probe = astk_probe, > >>> + .disconnect = astk_disconnect, > >>> + .resume = astk_resume, > >>> + .suspend = astk_suspend, > >>> + .supports_autosuspend = 1, > >>> +}; > >>> + > >>> +static int __init hydro_i_pro_init(void) > >>> +{ > >>> + return usb_register(&hydro_i_pro_driver); > >>> +} > >>> + > >>> +static void __exit hydro_i_pro_exit(void) > >>> +{ > >>> + usb_deregister(&hydro_i_pro_driver); > >>> +} > >>> + > >>> +module_init(hydro_i_pro_init); > >>> +module_exit(hydro_i_pro_exit); > >>> + > >>> +MODULE_LICENSE("GPL"); > >>> +MODULE_AUTHOR("Jaap Aarts <jaap.aarts1@gmail.com>"); > >>> +MODULE_DESCRIPTION("Corsair HXXXi pro device driver"); > >>> > >> >
>-----Original Message----- >From: jaap aarts <jaap.aarts1@gmail.com> >Sent: 2020年7月19日 17:38 >To: kernel test robot <lkp@intel.com> >Cc: Jean Delvare <jdelvare@suse.com>; Guenter Roeck <linux@roeck-us.net>; >linux-hwmon@vger.kernel.org; linux-usb@vger.kernel.org; kbuild- >all@lists.01.org >Subject: Re: [PATCH V2] hwmon: add fan/pwm driver for corsair h100i platinum > >I tried to reproduce this, but I got the error: >xtensa-linux-gcc: error: missing argument to '-Wframe-larger-than=' >at the last step using the provided config. Hi Jaap Aarts, Sorry to not reproduce the error you met. You can try to reproduce the modpost error With any kernel config that enable SENSORS_CORSAIR_HYDRO_I_PRO and disable USB. The driver supposed to need add "depends on USB" in kconfig since it use usb API. --Hui > >Jaap Aarts > >On Sun, 19 Jul 2020 at 02:31, kernel test robot <lkp@intel.com> wrote: >> >> Hi jaap, >> >> Thank you for the patch! Yet something to improve: >> >> [auto build test ERROR on hwmon/hwmon-next] [also build test ERROR on >> v5.8-rc5 next-20200717] [If your patch is applied to the wrong git >> tree, kindly drop us a note. >> And when submitting patch, we suggest to use '--base' as documented in >> https://git-scm.com/docs/git-format-patch] >> >> url: https://github.com/0day-ci/linux/commits/jaap-aarts/hwmon-add-fan- >pwm-driver-for-corsair-h100i-platinum/20200717-201923 >> base: https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git >hwmon-next >> config: xtensa-randconfig-r011-20200719 (attached as .config) >> compiler: xtensa-linux-gcc (GCC) 9.3.0 reproduce (this is a W=1 >> build): >> wget https://raw.githubusercontent.com/intel/lkp- >tests/master/sbin/make.cross -O ~/bin/make.cross >> chmod +x ~/bin/make.cross >> # save the attached .config to linux build tree >> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross >> ARCH=xtensa >> >> If you fix the issue, kindly add following tag as appropriate >> Reported-by: kernel test robot <lkp@intel.com> >> >> All errors (new ones prefixed by >>, old ones prefixed by <<): >> >> >> ERROR: modpost: "usb_deregister" [drivers/hwmon/corsair_hydro_i_pro.ko] >undefined! >> >> ERROR: modpost: "usb_register_driver" >[drivers/hwmon/corsair_hydro_i_pro.ko] undefined! >> >> ERROR: modpost: "usb_put_dev" [drivers/hwmon/corsair_hydro_i_pro.ko] >undefined! >> >> ERROR: modpost: "usb_put_intf" [drivers/hwmon/corsair_hydro_i_pro.ko] >undefined! >> >> ERROR: modpost: "usb_get_intf" [drivers/hwmon/corsair_hydro_i_pro.ko] >undefined! >> >> ERROR: modpost: "usb_get_dev" [drivers/hwmon/corsair_hydro_i_pro.ko] >undefined! >> >> ERROR: modpost: "usb_find_common_endpoints" >[drivers/hwmon/corsair_hydro_i_pro.ko] undefined! >> >> ERROR: modpost: "usb_control_msg" >[drivers/hwmon/corsair_hydro_i_pro.ko] undefined! >> >> ERROR: modpost: "usb_autopm_put_interface" >[drivers/hwmon/corsair_hydro_i_pro.ko] undefined! >> >> ERROR: modpost: "usb_autopm_get_interface" >[drivers/hwmon/corsair_hydro_i_pro.ko] undefined! >> >> ERROR: modpost: "usb_bulk_msg" [drivers/hwmon/corsair_hydro_i_pro.ko] >undefined! >> >> --- >> 0-DAY CI Kernel Test Service, Intel Corporation >> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 288ae9f63588..9831a40fb05f 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -378,6 +378,12 @@ config SENSORS_ARM_SCPI and power sensors available on ARM Ltd's SCP based platforms. The actual number and type of sensors exported depend on the platform. +config SENSORS_CORSAIR_HYDRO_I_PRO + tristate "Corsair hydro HXXXi pro driver" + help + If you say yes here you get support for the corsair hydro HXXXi pro + range of devices. + config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on X86 && I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 3e32c21f5efe..ec63294b3ef1 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_SENSORS_W83793) += w83793.o obj-$(CONFIG_SENSORS_W83795) += w83795.o obj-$(CONFIG_SENSORS_W83781D) += w83781d.o obj-$(CONFIG_SENSORS_W83791D) += w83791d.o +obj-$(CONFIG_SENSORS_CORSAIR_HYDRO_I_PRO) += corsair_hydro_i_pro.o obj-$(CONFIG_SENSORS_AB8500) += abx500.o ab8500.o obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o diff --git a/drivers/hwmon/corsair_hydro_i_pro.c b/drivers/hwmon/corsair_hydro_i_pro.c new file mode 100644 index 000000000000..43bf52d8d365 --- /dev/null +++ b/drivers/hwmon/corsair_hydro_i_pro.c @@ -0,0 +1,791 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * A hwmon driver for all corsair hyxro HXXXi pro all-in-one liquid coolers. + * Copyright (c) Jaap Aarts 2020 + * + * Protocol reverse engineered by audiohacked + * https://github.com/audiohacked/OpendriverLink + */ + +/* + * Supports following liquid coolers: + * H100i platinum + * + * Other products should work with this driver but no testing has been done. + * + * Note: platinum is the codename name for pro within the driver, so H100i platinum = H100i pro. + * But some products are actually calles platinum, these are not intended to be supported. + * + * Note: fan curve control has not been implemented + */ +#include <linux/errno.h> +#include <linux/hwmon.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb.h> + +struct hydro_i_pro_device { + struct usb_device *udev; + + unsigned char *bulk_out_buffer; + char *bulk_in_buffer; + size_t bulk_out_size; + size_t bulk_in_size; + char bulk_in_endpointAddr; + char bulk_out_endpointAddr; + + struct usb_interface *interface; /* the interface for this device */ + struct semaphore + limit_sem; /* limiting the number of writes in progress */ +}; + +struct curve_point { + uint8_t temp; + uint8_t pwm; +}; + +struct hwmon_fan_data { + char fan_channel; + long fan_target; + unsigned char fan_pwm_target; + long mode; + struct curve_point curve[7]; +}; + +struct hwmon_data { + struct hydro_i_pro_device *hdev; + int channel_count; + void **channel_data; +}; + +struct curve_point quiet_curve[] = { + { + .temp = 0x1F, + .pwm = 0x15, + }, + { + .temp = 0x21, + .pwm = 0x1E, + }, + { + .temp = 0x24, + .pwm = 0x25, + }, + { + .temp = 0x27, + .pwm = 0x2D, + }, + { + .temp = 0x29, + .pwm = 0x38, + }, + { + .temp = 0x2C, + .pwm = 0x4A, + }, + { + .temp = 0x2F, + .pwm = 0x64, + }, +}; + +struct curve_point balanced_curve[] = { + { + .temp = 0x1C, + .pwm = 0x15, + }, + { + .temp = 0x1E, + .pwm = 0x1B, + }, + { + .temp = 0x20, + .pwm = 0x23, + }, + { + .temp = 0x22, + .pwm = 0x28, + }, + { + .temp = 0x24, + .pwm = 0x32, + }, + { + .temp = 0x27, + .pwm = 0x48, + }, + { + .temp = 0x29, + .pwm = 0x64, + }, +}; + +struct curve_point extreme_curve[] = { + { + .temp = 0x19, + .pwm = 0x28, + }, + { + .temp = 0x1B, + .pwm = 0x2E, + }, + { + .temp = 0x1D, + .pwm = 0x37, + }, + { + .temp = 0x1E, + .pwm = 0x41, + }, + { + .temp = 0x1F, + .pwm = 0x4C, + }, + { + .temp = 0x20, + .pwm = 0x56, + }, + { + .temp = 0x21, + .pwm = 0x64, + }, +}; + +#define default_curve quiet_curve + +enum opcodes { + PWM_FAN_CURVE_CMD = 0x40, + PWM_GET_CURRENT_CMD = 0x41, + PWM_FAN_TARGET_CMD = 0x42, + RPM_FAN_TARGET_CMD = 0x43, +}; + +#define SUCCES_LENGTH 3 +#define SUCCES_CODE (0x12, 0x34) +static const char SUCCESS[SUCCES_LENGTH - 1] = { 0x12, 0x34 }; + +static bool check_succes(enum opcodes command, char ret[SUCCES_LENGTH]) +{ + char success[SUCCES_LENGTH] = { command, SUCCES_CODE }; + + return strncmp(ret, success, SUCCES_LENGTH) == 0; +} + +int set_fan_pwm_curve(struct hydro_i_pro_device *hdev, + struct hwmon_fan_data *fan_data, + struct curve_point point[7]) +{ + int retval; + int wrote; + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); + unsigned char *send_buf = hdev->bulk_out_buffer; + unsigned char *recv_buf = hdev->bulk_in_buffer; + + memcpy(fan_data->curve, point, sizeof(fan_data->curve)); + + send_buf[0] = PWM_FAN_CURVE_CMD; + send_buf[1] = fan_data->fan_channel; + send_buf[2] = point[0].temp; + send_buf[3] = point[1].temp; + send_buf[4] = point[2].temp; + send_buf[5] = point[3].temp; + send_buf[6] = point[4].temp; + send_buf[7] = point[5].temp; + send_buf[8] = point[6].temp; + send_buf[9] = point[0].pwm; + send_buf[10] = point[1].pwm; + send_buf[11] = point[2].pwm; + send_buf[12] = point[3].pwm; + send_buf[13] = point[4].pwm; + send_buf[14] = point[5].pwm; + send_buf[15] = point[6].pwm; + + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 16, &wrote, 100); + if (retval != 0) + return retval; + + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 4, &wrote, 100); + if (retval != 0) + return retval; + + if (!check_succes(send_buf[0], recv_buf)) { + dev_info(&hdev->udev->dev, + "[*] failed setting fan curve %d,%d,%d/%d\n", + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); + return -EINVAL; + } + return 0; +} + +int set_fan_target_rpm(struct hydro_i_pro_device *hdev, + struct hwmon_fan_data *fan_data, long val) +{ + int retval; + int wrote; + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); + + unsigned char *send_buf = hdev->bulk_out_buffer; + unsigned char *recv_buf = hdev->bulk_in_buffer; + + fan_data->fan_target = val; + fan_data->fan_pwm_target = 0; + + send_buf[0] = RPM_FAN_TARGET_CMD; + send_buf[1] = fan_data->fan_channel; + send_buf[2] = (fan_data->fan_target >> 8); + send_buf[3] = fan_data->fan_target; + + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); + if (retval != 0) + return retval; + + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100); + if (retval != 0) + return retval; + + if (!check_succes(send_buf[0], recv_buf)) { + dev_info(&hdev->udev->dev, + "[*] failed setting fan rpm %d,%d,%d/%d\n", + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); + return -EINVAL; + } + return 0; +} + +int get_fan_current_rpm(struct hydro_i_pro_device *hdev, + struct hwmon_fan_data *fan_data, long *val) +{ + int retval; + int wrote; + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); + + unsigned char *send_buf = hdev->bulk_out_buffer; + unsigned char *recv_buf = hdev->bulk_in_buffer; + + send_buf[0] = PWM_GET_CURRENT_CMD; + send_buf[1] = fan_data->fan_channel; + + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 2, &wrote, 100); + if (retval != 0) + return retval; + + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100); + if (retval != 0) + return retval; + + if (!check_succes(send_buf[0], recv_buf) || + recv_buf[3] != fan_data->fan_channel) { + dev_info(&hdev->udev->dev, + "[*] failed retrieving fan rmp %d,%d,%d/%d\n", + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); + return -EINVAL; + } + + *val = ((recv_buf[4]) << 8) + recv_buf[5]; + return 0; +} + +int set_fan_target_pwm(struct hydro_i_pro_device *hdev, + struct hwmon_fan_data *fan_data, long val) +{ + int retval; + int wrote; + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); + + unsigned char *send_buf = hdev->bulk_out_buffer; + unsigned char *recv_buf = hdev->bulk_in_buffer; + + fan_data->fan_pwm_target = val; + fan_data->fan_target = 0; + + send_buf[0] = PWM_FAN_TARGET_CMD; + send_buf[1] = fan_data->fan_channel; + send_buf[3] = fan_data->fan_pwm_target; + + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); + if (retval != 0) + return retval; + + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000); + if (retval != 0) + return retval; + + if (!check_succes(send_buf[0], recv_buf)) { + dev_info(&hdev->udev->dev, + "[*] failed setting fan pwm %d,%d,%d/%d\n", + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); + return -EINVAL; + } + return 0; +} + +umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, u32 attr, + int channel) +{ + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + return 0444; + break; + case hwmon_fan_target: + return 0644; + break; + case hwmon_fan_min: + return 0444; + break; + default: + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + return 0200; + break; + case hwmon_pwm_enable: + return 0644; + break; + default: + break; + } + break; + default: + break; + } + return 0; +} + +static int hwmon_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct hwmon_data *data = dev_get_drvdata(dev); + struct hydro_i_pro_device *hdev = data->hdev; + struct hwmon_fan_data *fan_data; + int retval = 0; + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_target: + fan_data = data->channel_data[channel]; + if (fan_data->mode != 1) + return -EINVAL; + + retval = usb_autopm_get_interface(hdev->interface); + if (retval) + goto exit; + + if (down_trylock(&hdev->limit_sem)) { + retval = -EAGAIN; + goto cleanup_interface; + } + + retval = set_fan_target_rpm(hdev, fan_data, val); + if (retval) + goto cleanup; + + break; + default: + return -EINVAL; + } + goto exit; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + fan_data = data->channel_data[channel]; + if (fan_data->mode != 1) + return -EINVAL; + + retval = usb_autopm_get_interface(hdev->interface); + if (retval) + goto exit; + + if (down_trylock(&hdev->limit_sem)) { + retval = -EAGAIN; + goto cleanup_interface; + } + + retval = set_fan_target_pwm(hdev, fan_data, val); + if (retval) + goto cleanup; + + break; + case hwmon_pwm_enable: + fan_data = data->channel_data[channel]; + + retval = usb_autopm_get_interface(hdev->interface); + if (retval) + goto exit; + + if (down_trylock(&hdev->limit_sem)) { + retval = -EAGAIN; + goto cleanup_interface; + } + fan_data->mode = val; + + switch (val) { + case 0: + set_fan_pwm_curve(hdev, fan_data, + default_curve); + break; + case 1: + if (fan_data->fan_target != 0) { + retval = set_fan_target_rpm( + hdev, fan_data, + fan_data->fan_target); + if (retval) + goto cleanup; + } else if (fan_data->fan_pwm_target != 0) { + retval = set_fan_target_pwm( + hdev, fan_data, + fan_data->fan_pwm_target); + if (retval) + goto cleanup; + } + break; + case 2: + set_fan_pwm_curve(hdev, fan_data, quiet_curve); + break; + case 3: + set_fan_pwm_curve(hdev, fan_data, + balanced_curve); + break; + case 4: + set_fan_pwm_curve(hdev, fan_data, + extreme_curve); + break; + } + break; + default: + return -EINVAL; + } + goto exit; + default: + return -EINVAL; + } + +cleanup: + up(&hdev->limit_sem); +cleanup_interface: + usb_autopm_put_interface(hdev->interface); +exit: + return retval; +} + +int hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, + int channel, long *val) +{ + struct hwmon_data *data = dev_get_drvdata(dev); + struct hydro_i_pro_device *hdev = data->hdev; + struct hwmon_fan_data *fan_data; + int retval = 0; + + if (channel >= data->channel_count) + return -EAGAIN; + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + fan_data = data->channel_data[channel]; + + retval = usb_autopm_get_interface(hdev->interface); + if (retval) + goto exit; + + if (down_trylock(&hdev->limit_sem)) { + retval = -EAGAIN; + goto cleanup_interface; + } + + retval = get_fan_current_rpm(hdev, fan_data, val); + if (retval) + goto cleanup; + + goto cleanup; + case hwmon_fan_target: + fan_data = data->channel_data[channel]; + if (fan_data->mode != 1) { + *val = 0; + goto exit; + } + *val = fan_data->fan_target; + goto exit; + case hwmon_fan_min: + *val = 200; + goto exit; + + default: + return -EINVAL; + } + goto exit; + + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_enable: + fan_data = data->channel_data[channel]; + *val = fan_data->mode; + goto exit; + default: + return -EINVAL; + } + goto exit; + + default: + return -EINVAL; + } + +cleanup: + up(&hdev->limit_sem); +cleanup_interface: + usb_autopm_put_interface(hdev->interface); +exit: + return retval; +} + +#define fan_config (HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN) +#define pwm_config (HWMON_PWM_INPUT | HWMON_PWM_ENABLE) + +static const struct hwmon_ops i_pro_ops = { + .is_visible = hwmon_is_visible, + .read = hwmon_read, + .write = hwmon_write, +}; + +bool does_fan_exist(struct hydro_i_pro_device *hdev, int channel) +{ + int retval; + int wrote; + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); + + unsigned char *send_buf = hdev->bulk_out_buffer; + unsigned char *recv_buf = hdev->bulk_in_buffer; + + send_buf[0] = RPM_FAN_TARGET_CMD; + send_buf[1] = channel; + send_buf[2] = (600 >> 8); + send_buf[3] = (unsigned char)600; + + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); + if (retval != 0) + return false; + + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000); + if (retval != 0) + return false; + + if (!check_succes(send_buf[0], recv_buf)) + return false; + return true; +} + +int get_fan_count(struct hydro_i_pro_device *hdev) +{ + int fan; + + for (fan = 0; does_fan_exist(hdev, fan); fan += 1) + ; + return fan; +} + +void hwmon_init(struct hydro_i_pro_device *hdev) +{ + int fan_id; + struct device *hwmon_dev; + struct hwmon_fan_data *fan; + struct hwmon_data *data = devm_kzalloc( + &hdev->udev->dev, sizeof(struct hwmon_data), GFP_KERNEL); + struct hwmon_chip_info *hwmon_info = devm_kzalloc( + &hdev->udev->dev, sizeof(struct hwmon_chip_info), GFP_KERNEL); + //Allocate the info table + struct hwmon_channel_info **aio_info = + devm_kzalloc(&hdev->udev->dev, + sizeof(struct hwmon_channel_info *) * 2, + GFP_KERNEL); //2 for each channel info. + + //Allocate the fan and PWM configuration + u32 *fans_config = devm_kzalloc(&hdev->udev->dev, + sizeof(u32) * (data->channel_count + 1), + GFP_KERNEL); + u32 *pwms_config = devm_kzalloc(&hdev->udev->dev, + sizeof(u32) * (data->channel_count + 1), + GFP_KERNEL); + + data->channel_count = get_fan_count(hdev); //amount of fans + data->channel_data = + devm_kzalloc(&hdev->udev->dev, + sizeof(char *) * data->channel_count, GFP_KERNEL); + + //For each fan create a data channel a fan config entry and a pwm config entry + for (fan_id = 0; fan_id <= data->channel_count; fan_id++) { + fan = devm_kzalloc(&hdev->udev->dev, + sizeof(struct hwmon_fan_data), GFP_KERNEL); + fan->fan_channel = fan_id; + fan->mode = 2; + data->channel_data[fan_id] = fan; + fans_config[fan_id] = fan_config; + pwms_config[fan_id] = pwm_config; + } + fans_config[data->channel_count] = 0; + pwms_config[data->channel_count] = 0; + + aio_info[0] = + devm_kzalloc(&hdev->udev->dev, + sizeof(struct hwmon_channel_info), GFP_KERNEL); + aio_info[0]->type = hwmon_fan; + aio_info[0]->config = fans_config; + + aio_info[1] = + devm_kzalloc(&hdev->udev->dev, + sizeof(struct hwmon_channel_info), GFP_KERNEL); + aio_info[1]->type = hwmon_pwm; + aio_info[1]->config = pwms_config; + + hwmon_info->ops = &i_pro_ops; + hwmon_info->info = (const struct hwmon_channel_info **)aio_info; + + data->hdev = hdev; + hwmon_dev = devm_hwmon_device_register_with_info( + &hdev->udev->dev, "driver_fan", data, hwmon_info, NULL); + dev_info(&hdev->udev->dev, "[*] Setup hwmon\n"); +} + +/* + * Devices that work with this driver. + * More devices should work, however none have been tested. + */ +static const struct usb_device_id astk_table[] = { + { USB_DEVICE(0x1b1c, 0x0c15) }, + {}, +}; + +MODULE_DEVICE_TABLE(usb, astk_table); + +int init_device(struct usb_device *udev) +{ + int retval; + + //This is needed because when running windows in a vm with proprietary driver + //and you switch to this driver, the device will not respond unless you run this. + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x40, + 0xffff, 0x0000, 0, 0, 0); + //this always returns error + if (retval != 0) + ; + + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, + 0x0002, 0x0000, 0, 0, 0); + return retval; +} + +int deinit_device(struct usb_device *udev) +{ + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, + 0x0004, 0x0000, 0, 0, 0); +} + +static void astk_delete(struct hydro_i_pro_device *hdev) +{ + usb_put_intf(hdev->interface); + usb_put_dev(hdev->udev); + kfree(hdev->bulk_in_buffer); + kfree(hdev->bulk_out_buffer); + kfree(hdev); +} + +static int astk_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct hydro_i_pro_device *hdev; + int retval; + struct usb_endpoint_descriptor *bulk_in, *bulk_out; + + hdev = kzalloc(sizeof(*hdev), GFP_KERNEL); + if (!hdev) { + retval = -ENOMEM; + goto exit; + } + + retval = usb_find_common_endpoints(interface->cur_altsetting, &bulk_in, + &bulk_out, NULL, NULL); + if (retval != 0) + goto exit; + + hdev->udev = usb_get_dev(interface_to_usbdev(interface)); + hdev->interface = usb_get_intf(interface); + + /* set up the endpoint information */ + /* use only the first bulk-in and bulk-out endpoints */ + hdev->bulk_in_size = usb_endpoint_maxp(bulk_in); + hdev->bulk_in_buffer = kmalloc(hdev->bulk_in_size, GFP_KERNEL); + hdev->bulk_in_endpointAddr = bulk_in->bEndpointAddress; + hdev->bulk_out_size = usb_endpoint_maxp(bulk_out); + hdev->bulk_out_buffer = kmalloc(hdev->bulk_out_size, GFP_KERNEL); + hdev->bulk_out_endpointAddr = bulk_out->bEndpointAddress; + + retval = init_device(hdev->udev); + if (retval) { + dev_err(&interface->dev, "failed initialising this device.\n"); + goto exit; + } + + hwmon_init(hdev); + + usb_set_intfdata(interface, hdev); + sema_init(&hdev->limit_sem, 8); +exit: + return retval; +} + +static void astk_disconnect(struct usb_interface *interface) +{ + struct hydro_i_pro_device *hdev = usb_get_intfdata(interface); + + dev_info(&hdev->udev->dev, "[*] DEINIT DEVICE\n"); + usb_set_intfdata(interface, NULL); + astk_delete(hdev); + deinit_device(hdev->udev); +} +static int astk_resume(struct usb_interface *intf) +{ + return 0; +} + +static int astk_suspend(struct usb_interface *intf, pm_message_t message) +{ + return 0; +} + +static struct usb_driver hydro_i_pro_driver = { + .name = "hydro_i_pro_device", + .id_table = astk_table, + .probe = astk_probe, + .disconnect = astk_disconnect, + .resume = astk_resume, + .suspend = astk_suspend, + .supports_autosuspend = 1, +}; + +static int __init hydro_i_pro_init(void) +{ + return usb_register(&hydro_i_pro_driver); +} + +static void __exit hydro_i_pro_exit(void) +{ + usb_deregister(&hydro_i_pro_driver); +} + +module_init(hydro_i_pro_init); +module_exit(hydro_i_pro_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jaap Aarts <jaap.aarts1@gmail.com>"); +MODULE_DESCRIPTION("Corsair HXXXi pro device driver");
Adds fan/pwm support for H100i platinum. Custom temp/fan curves are not supported, however the presets found in the proprietary drivers are available. Signed-off-by: Jaap Aarts <jaap.aarts1@gmail.com> --- drivers/hwmon/Kconfig | 6 + drivers/hwmon/Makefile | 1 + drivers/hwmon/corsair_hydro_i_pro.c | 791 ++++++++++++++++++++++++++++ 3 files changed, 798 insertions(+) create mode 100644 drivers/hwmon/corsair_hydro_i_pro.c