@@ -292,9 +292,13 @@ static void bdc_mem_init(struct bdc *bdc, bool reinit)
/* Initialize SRR to 0 */
memset(bdc->srr.sr_bds, 0,
NUM_SR_ENTRIES * sizeof(struct bdc_bd));
- /* clear ep flags to avoid post disconnect stops/deconfigs */
- for (i = 1; i < bdc->num_eps; ++i)
- bdc->bdc_ep_array[i]->flags = 0;
+ /*
+ * clear ep flags to avoid post disconnect stops/deconfigs but
+ * not during S2 exit
+ */
+ if (!bdc->gadget.speed)
+ for (i = 1; i < bdc->num_eps; ++i)
+ bdc->bdc_ep_array[i]->flags = 0;
} else {
/* One time initiaization only */
/* Enable status report function pointers */
On Android systems, After temporarily putting device to S2 by short pressing the power button on the remote, the display turns off. Then press the power button to turn the display back up. Adb devices would show the devices is offline. It needs a physical disconnect of the usb cable or power cycle to bring the device back online. The device is operational otherwise. The problem is that during S2 resume, the ADB gadget driver could not link back with the BDC driver because the endpoint flags were cleared. The fix is to clear the endpoint flags for the disconnect case only and not for S2 exit. Signed-off-by: Al Cooper <alcooperx@gmail.com> --- drivers/usb/gadget/udc/bdc/bdc_core.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)