@@ -202,7 +202,7 @@ Keyspan USA-series Serial Adapters
More information is available at:
- http://www.carnationsoftware.com/carnation/Keyspan.html
+ https://www.carnationsoftware.com/carnation/Keyspan.html
For any questions or problems with this driver, please contact Hugh
Blemings at hugh@misc.nu
@@ -20,7 +20,7 @@
* Please note that later models of the cyberjack reader family are
* supported by a libusb-based userspace device driver.
*
- * Homepage: http://www.reiner-sct.de/support/treiber_cyberjack.php#linux
+ * Homepage: https://www.reiner-sct.de/support/treiber_cyberjack.php#linux
*/
@@ -14,7 +14,7 @@
* The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side,
* USB on the other.
*
- * Thanx to FTDI (http://www.ftdichip.com) for so kindly providing details
+ * Thanx to FTDI (https://www.ftdichip.com) for so kindly providing details
* of the protocol required to talk to the device and ongoing assistence
* during development.
*
@@ -452,7 +452,7 @@ enum ftdi_sio_baudrate {
* FTDI_SIO_READ_EEPROM
*
* EEPROM format found in FTDI AN_201, "FT-X MTP memory Configuration",
- * http://www.ftdichip.com/Support/Documents/AppNotes/AN_201_FT-X%20MTP%20Memory%20Configuration.pdf
+ * https://www.ftdichip.com/Support/Documents/AppNotes/AN_201_FT-X%20MTP%20Memory%20Configuration.pdf
*/
#define FTDI_SIO_READ_EEPROM_REQUEST_TYPE 0xc0
#define FTDI_SIO_READ_EEPROM_REQUEST FTDI_SIO_READ_EEPROM
@@ -60,14 +60,14 @@
/*
* Texas Instruments XDS100v2 JTAG / BeagleBone A3
* http://processors.wiki.ti.com/index.php/XDS100
- * http://beagleboard.org/bone
+ * https://beagleboard.org/bone
*/
#define TI_XDS100V2_PID 0xa6d0
#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
#define FTDI_EV3CON_PID 0xABB9 /* Mindstorms EV3 Console Adapter */
-/* US Interface Navigator (http://www.usinterface.com/) */
+/* US Interface Navigator (https://www.usinterface.com/) */
#define FTDI_USINT_CAT_PID 0xb810 /* Navigator CAT and 2nd PTT lines */
#define FTDI_USINT_WKEY_PID 0xb811 /* Navigator WKEY and FSK lines */
#define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */
@@ -92,11 +92,11 @@
#define FTDI_OPENDCC_GBM_PID 0xBFDC
#define FTDI_OPENDCC_GBM_BOOST_PID 0xBFDD
-/* NZR SEM 16+ USB (http://www.nzr.de) */
+/* NZR SEM 16+ USB (https://www.nzr.de) */
#define FTDI_NZR_SEM_USB_PID 0xC1E0 /* NZR SEM-LOG16+ */
/*
- * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
+ * RR-CirKits LocoBuffer USB (https://www.rr-cirkits.com)
*/
#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */
@@ -122,7 +122,7 @@
#define FTDI_DISTORTEC_JTAG_LOCK_PICK_PID 0xCFF8
-/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
+/* SCS HF Radio Modems PID's (https://www.scs-ptc.com) */
/* the VID is the standard ftdi vid (FTDI_VID) */
#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */
@@ -138,7 +138,7 @@
#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
/*
- * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
+ * Gamma Scout (https://gamma-scout.com/). Submitted by rsc@runtux.com.
*/
#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */
@@ -153,7 +153,7 @@
#define FTDI_VARDAAN_PID 0xF070
/*
- * Xsens Technologies BV products (http://www.xsens.com).
+ * Xsens Technologies BV products (https://www.xsens.com).
*/
#define XSENS_VID 0x2639
#define XSENS_AWINDA_STATION_PID 0x0101
@@ -360,7 +360,7 @@
#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */
/*
- * microHAM product IDs (http://www.microham.com).
+ * microHAM product IDs (https://www.microham.com).
* Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
* and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
* Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
@@ -576,7 +576,7 @@
/*
* Synapse Wireless product ids (FTDI_VID)
- * http://www.synapse-wireless.com
+ * https://www.synapse-wireless.com
*/
#define FTDI_SYNAPSE_SS200_PID 0x9090 /* SS200 - SNAP Stick 200 */
@@ -630,7 +630,7 @@
* applications. The VID/PID has also been used in firmware
* emulating FTDI serial chips by:
* Hornby Elite - Digital Command Control Console
- * http://www.hornby.com/hornby-dcc/controllers/
+ * https://www.hornby.com/hornby-dcc/controllers/
*/
#define MICROCHIP_VID 0x04D8
#define MICROCHIP_USB_BOARD_PID 0x000A /* CDC RS-232 Emulation Demo */
@@ -746,7 +746,7 @@
#define ICOM_ID_RP2KVR_PID 0x0013 /* ID-RP2000V Receive config port */
/*
- * GN Otometrics (http://www.otometrics.com)
+ * GN Otometrics (https://www.otometrics.com)
* Submitted by Ville Sundberg.
*/
#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */
@@ -969,7 +969,7 @@
/*
* Physik Instrumente
- * http://www.physikinstrumente.com/en/products/
+ * https://www.physikinstrumente.com/en/products/
*/
/* These two devices use the VID of FTDI */
#define PI_C865_PID 0xe0a0 /* PI C-865 Piezomotor Controller */
@@ -1399,7 +1399,7 @@
#define MJSG_HD_RADIO_PID 0x937C
/*
- * D.O.Tec products (http://www.directout.eu)
+ * D.O.Tec products (https://www.directout.eu)
*/
#define FTDI_DOTEC_PID 0x9868
@@ -1419,7 +1419,7 @@
/*
- * Accesio USB Data Acquisition products (http://www.accesio.com/)
+ * Accesio USB Data Acquisition products (https://www.accesio.com/)
*/
#define ACCESIO_COM4SM_PID 0xD578
@@ -1435,7 +1435,7 @@
#define MILKYMISTONE_JTAGSERIAL_PID 0x0713
/*
- * CTI GmbH RS485 Converter http://www.cti-lean.com/
+ * CTI GmbH RS485 Converter https://www.cti-lean.com/
*/
/* USB-485-Mini*/
#define FTDI_CTI_MINI_PID 0xF608
@@ -1443,7 +1443,7 @@
#define FTDI_CTI_NANO_PID 0xF60B
/*
- * ZeitControl cardsystems GmbH rfid-readers http://zeitcontrol.de
+ * ZeitControl cardsystems GmbH rfid-readers https://zeitcontrol.de
*/
/* TagTracer MIFARE*/
#define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID 0xF7C0
@@ -1523,7 +1523,7 @@
#define BRAINBOXES_US_160_8_PID 0x9008 /* US-160 16xRS232 1Mbaud Port 15 and 16 */
/*
- * ekey biometric systems GmbH (http://ekey.net/)
+ * ekey biometric systems GmbH (https://ekey.net/)
*/
#define FTDI_EKEY_CONV_USB_PID 0xCB08 /* Converter USB */
@@ -33,7 +33,7 @@
#include <linux/ioctl.h>
#include "kobil_sct.h"
-#define DRIVER_AUTHOR "KOBIL Systems GmbH - http://www.kobil.com"
+#define DRIVER_AUTHOR "KOBIL Systems GmbH - https://www.kobil.com"
#define DRIVER_DESC "KOBIL USB Smart Card Terminal Driver (experimental)"
#define KOBIL_VENDOR_ID 0x0D46
@@ -4,7 +4,7 @@
distributed with Linux.
Copyright: 2007 Metrologic Instruments. All rights reserved.
- Copyright: 2011 Azimut Ltd. <http://azimutrzn.ru/>
+ Copyright: 2011 Azimut Ltd. <https://azimutrzn.ru/>
*/
#include <linux/kernel.h>
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> --- Continuing my work started at 93431e0607e5. See also: git log --oneline '--author=Alexander A. Klimov <grandmaster@al2klimov.de>' v5.7..master (Actually letting a shell for loop submit all this stuff for me.) If there are any URLs to be removed completely or at least not (just) HTTPSified: Just clearly say so and I'll *undo my change*. See also: https://lkml.org/lkml/2020/6/27/64 If there are any valid, but yet not changed URLs: See: https://lkml.org/lkml/2020/6/26/837 If you apply the patch, please let me know. Sorry again to all maintainers who complained about subject lines. Now I realized that you want an actually perfect prefixes, not just subsystem ones. I tried my best... And yes, *I could* (at least half-)automate it. Impossible is nothing! :) Documentation/usb/usb-serial.rst | 2 +- drivers/usb/serial/cyberjack.c | 2 +- drivers/usb/serial/ftdi_sio.h | 4 ++-- drivers/usb/serial/ftdi_sio_ids.h | 34 +++++++++++++++---------------- drivers/usb/serial/kobil_sct.c | 2 +- drivers/usb/serial/metro-usb.c | 2 +- 6 files changed, 23 insertions(+), 23 deletions(-)