@@ -12,12 +12,9 @@
#include <linux/interrupt.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/irq.h>
-/* GPIO port for VBUS detecting */
-static int vbus_gpio_port = -1; /* GPIO port number (-1:Not used) */
-
#define PCH_VBUS_PERIOD 3000 /* VBUS polling period (msec) */
#define PCH_VBUS_INTERVAL 10 /* VBUS polling interval (msec) */
@@ -301,13 +298,13 @@ struct pch_udc_ep {
/**
* struct pch_vbus_gpio_data - Structure holding GPIO informaton
* for detecting VBUS
- * @port: gpio port number
+ * @port: gpio descriptor for the VBUS GPIO
* @intr: gpio interrupt number
* @irq_work_fall: Structure for WorkQueue
* @irq_work_rise: Structure for WorkQueue
*/
struct pch_vbus_gpio_data {
- int port;
+ struct gpio_desc *port;
int intr;
struct work_struct irq_work_fall;
struct work_struct irq_work_rise;
@@ -1254,7 +1251,7 @@ static int pch_vbus_gpio_get_value(struct pch_udc_dev *dev)
int vbus = 0;
if (dev->vbus_gpio.port)
- vbus = gpio_get_value(dev->vbus_gpio.port) ? 1 : 0;
+ vbus = gpiod_get_value(dev->vbus_gpio.port) ? 1 : 0;
else
vbus = -1;
@@ -1356,42 +1353,30 @@ static irqreturn_t pch_vbus_gpio_irq(int irq, void *data)
/**
* pch_vbus_gpio_init() - This API initializes GPIO port detecting VBUS.
* @dev: Reference to the driver structure
- * @vbus_gpio_port: Number of GPIO port to detect gpio
*
* Return codes:
* 0: Success
* -EINVAL: GPIO port is invalid or can't be initialized.
*/
-static int pch_vbus_gpio_init(struct pch_udc_dev *dev, int vbus_gpio_port)
+static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
{
int err;
int irq_num = 0;
+ struct gpio_desc *gpiod;
- dev->vbus_gpio.port = 0;
+ dev->vbus_gpio.port = NULL;
dev->vbus_gpio.intr = 0;
- if (vbus_gpio_port <= -1)
- return -EINVAL;
-
- err = gpio_is_valid(vbus_gpio_port);
- if (!err) {
- pr_err("%s: gpio port %d is invalid\n",
- __func__, vbus_gpio_port);
- return -EINVAL;
- }
-
- err = gpio_request(vbus_gpio_port, "pch_vbus");
- if (err) {
- pr_err("%s: can't request gpio port %d, err: %d\n",
- __func__, vbus_gpio_port, err);
- return -EINVAL;
- }
+ /* Retrieve the GPIO line from the USB gadget device */
+ gpiod = devm_gpiod_get(dev->gadget.dev.parent, NULL, GPIOD_IN);
+ if (IS_ERR(gpiod))
+ return PTR_ERR(gpiod);
+ gpiod_set_consumer_name(gpiod, "pch_vbus");
- dev->vbus_gpio.port = vbus_gpio_port;
- gpio_direction_input(vbus_gpio_port);
+ dev->vbus_gpio.port = gpiod;
INIT_WORK(&dev->vbus_gpio.irq_work_fall, pch_vbus_gpio_work_fall);
- irq_num = gpio_to_irq(vbus_gpio_port);
+ irq_num = gpiod_to_irq(gpiod);
if (irq_num > 0) {
irq_set_irq_type(irq_num, IRQ_TYPE_EDGE_BOTH);
err = request_irq(irq_num, pch_vbus_gpio_irq, 0,
@@ -1417,9 +1402,6 @@ static void pch_vbus_gpio_free(struct pch_udc_dev *dev)
{
if (dev->vbus_gpio.intr)
free_irq(dev->vbus_gpio.intr, dev);
-
- if (dev->vbus_gpio.port)
- gpio_free(dev->vbus_gpio.port);
}
/**
@@ -2894,7 +2876,7 @@ static int pch_udc_pcd_init(struct pch_udc_dev *dev)
{
pch_udc_init(dev);
pch_udc_pcd_reinit(dev);
- pch_vbus_gpio_init(dev, vbus_gpio_port);
+ pch_vbus_gpio_init(dev);
return 0;
}
@@ -3096,6 +3078,13 @@ static int pch_udc_probe(struct pci_dev *pdev,
dev->base_addr = pcim_iomap_table(pdev)[bar];
+ /*
+ * FIXME: add a GPIO descriptor table to pdev.dev using
+ * gpiod_add_descriptor_table() from <linux/gpio/machine.h> based on
+ * the PCI subsystem ID. The system-dependent GPIO is necessary for
+ * VBUS operation.
+ */
+
/* initialize the hardware */
if (pch_udc_pcd_init(dev))
return -ENODEV;
This switches the PCH UDC driver to use GPIO descriptors. The way this is supposed to be used is confusing. The code contains the following: /* GPIO port for VBUS detecting */ static int vbus_gpio_port = -1; /* GPIO port number (-1:Not used) */ So a hardcoded GPIO number in the code. Further the probe() path very clearly will exit if the GPIO is not found, so this driver can only be configured by editing the code, hard-coding a GPIO number into this variable. This is simply not how we do things. My guess is that this is used in products by patching a GPIO number into this variable and shipping a kernel that is compile-time tailored for the target system. I switched this mechanism to using a GPIO descriptor associated with the parent PCI device. This can be added by using the 16bit subsystem ID or similar to identify which exact machine we are running on and what GPIO is present on that machine, and then add a GPIO descriptor using gpiod_add_lookup_table() from <linux/gpio/machine.h>. Since I don't have any target systems I cannot add this but I'm happy to help. I put in a FIXME so the people actually using this driver knows what to do. Cc: Felipe Balbi <balbi@kernel.org> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v2->v3: - Rebased on v5.9-rc1 ChangeLog v1->v2: - Collected Andy's tags. --- drivers/usb/gadget/udc/pch_udc.c | 55 +++++++++++++------------------- 1 file changed, 22 insertions(+), 33 deletions(-)