@@ -264,7 +264,8 @@ struct cp210x_port_private {
u8 bInterfaceNumber;
bool event_mode;
enum cp210x_event_state event_state;
- u8 lsr;
+ u8 lsr;
+ bool crtscts;
};
static struct usb_serial_driver cp210x_device = {
@@ -1117,6 +1118,7 @@ static bool cp210x_termios_change(const struct ktermios *a, const struct ktermio
static void cp210x_set_flow_control(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
+ struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
struct cp210x_special_chars chars;
struct cp210x_flow_ctl flow_ctl;
u32 flow_repl;
@@ -1161,10 +1163,12 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
ctl_hs |= CP210X_SERIAL_CTS_HANDSHAKE;
flow_repl &= ~CP210X_SERIAL_RTS_MASK;
flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_FLOW_CTL);
+ port_priv->crtscts = true;
} else {
ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE;
flow_repl &= ~CP210X_SERIAL_RTS_MASK;
flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_ACTIVE);
+ port_priv->crtscts = false;
}
if (I_IXOFF(tty))
@@ -1298,6 +1302,16 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
static void cp210x_dtr_rts(struct usb_serial_port *port, int on)
{
+ struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+
+ /*
+ * CP210X_SET_MHS cannot be used to control DTR/RTS when hardware flow
+ * control is enabled. Note that both lines are still deasserted when
+ * disabling the UART.
+ */
+ if (port_priv->crtscts)
+ return;
+
if (on)
cp210x_tiocmset_port(port, TIOCM_DTR | TIOCM_RTS, 0);
else
The CP210X_SET_MHS request cannot be used to control DTR/RTS when hardware flow control is enabled and instead returns an error which is currently logged as: cp210x ttyUSB0: failed set request 0x7 status: -32 Add a crtscts flag to keep track of the hardware flow-control setting and use it to suppress the request in dtr_rts(). Note that both lines are still deasserted when disabling the UART as part of close(). Also note that TIOCMSET is left unchanged and will continue to return an error to user-space when flow control is enabled (i.e. instead of disabling and re-enabling auto-RTS when RTS is deasserted and re-asserted). Reported-by: Pho Tran <pho.tran@silabs.com> Signed-off-by: Johan Hovold <johan@kernel.org> --- drivers/usb/serial/cp210x.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)