@@ -7,12 +7,14 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/errno.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-#include <linux/gpio/consumer.h>
#include <linux/irq.h>
#define PCH_VBUS_PERIOD 3000 /* VBUS polling period (msec) */
@@ -1360,6 +1362,43 @@ static irqreturn_t pch_vbus_gpio_irq(int irq, void *data)
return IRQ_HANDLED;
}
+static struct gpiod_lookup_table minnowboard_udc_gpios = {
+ .dev_id = "0000:02:02.4",
+ .table = {
+ GPIO_LOOKUP("sch_gpio.33158", 12, NULL, GPIO_ACTIVE_HIGH),
+ {}
+ },
+};
+
+static const struct dmi_system_id pch_udc_gpio_dmi_table[] = {
+ {
+ .ident = "MinnowBoard",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"),
+ },
+ .driver_data = &minnowboard_udc_gpios,
+ },
+ { }
+};
+
+static void pch_vbus_gpio_remove_table(void *table)
+{
+ gpiod_remove_lookup_table(table);
+}
+
+static int pch_vbus_gpio_add_table(struct pch_udc_dev *dev)
+{
+ struct device *d = &dev->pdev->dev;
+ const struct dmi_system_id *dmi;
+
+ dmi = dmi_first_match(pch_udc_gpio_dmi_table);
+ if (!dmi)
+ return 0;
+
+ gpiod_add_lookup_table(dmi->driver_data);
+ return devm_add_action_or_reset(d, pch_vbus_gpio_remove_table, dmi->driver_data);
+}
+
/**
* pch_vbus_gpio_init() - This API initializes GPIO port detecting VBUS.
* @dev: Reference to the driver structure
@@ -1378,8 +1417,12 @@ static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
dev->vbus_gpio.port = NULL;
dev->vbus_gpio.intr = 0;
+ err = pch_vbus_gpio_add_table(dev);
+ if (err)
+ return err;
+
/* Retrieve the GPIO line from the USB gadget device */
- gpiod = devm_gpiod_get(d, NULL, GPIOD_IN);
+ gpiod = devm_gpiod_get_optional(d, NULL, GPIOD_IN);
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
gpiod_set_consumer_name(gpiod, "pch_vbus");
@@ -2889,14 +2932,20 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
* @dev: Reference to the driver structure
*
* Return codes:
- * 0: Success
+ * 0: Success
+ * -%ERRNO: All kind of errors when retrieving VBUS GPIO
*/
static int pch_udc_pcd_init(struct pch_udc_dev *dev)
{
+ int ret;
+
pch_udc_init(dev);
pch_udc_pcd_reinit(dev);
- pch_vbus_gpio_init(dev);
- return 0;
+
+ ret = pch_vbus_gpio_init(dev);
+ if (ret)
+ pch_udc_exit(dev);
+ return ret;
}
/**
@@ -3098,16 +3147,10 @@ static int pch_udc_probe(struct pci_dev *pdev,
dev->base_addr = pcim_iomap_table(pdev)[bar];
- /*
- * FIXME: add a GPIO descriptor table to pdev.dev using
- * gpiod_add_descriptor_table() from <linux/gpio/machine.h> based on
- * the PCI subsystem ID. The system-dependent GPIO is necessary for
- * VBUS operation.
- */
-
/* initialize the hardware */
- if (pch_udc_pcd_init(dev))
- return -ENODEV;
+ retval = pch_udc_pcd_init(dev);
+ if (retval)
+ return retval;
pci_enable_msi(pdev);
Intel Minnowboard (v1) uses SCH GPIO line SUS7 (i.e. 12) for VBUS sense. Provide a DMI based quirk to have it's being used. Fixes: e20849a8c883 ("usb: gadget: pch_udc: Convert to use GPIO descriptors") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/usb/gadget/udc/pch_udc.c | 71 +++++++++++++++++++++++++------- 1 file changed, 57 insertions(+), 14 deletions(-)