@@ -41,6 +41,8 @@
#define USB_VENDOR_GENESYS_LOGIC 0x05e3
#define USB_VENDOR_SMSC 0x0424
#define USB_PRODUCT_USB5534B 0x5534
+#define USB_VENDOR_CYPRESS 0x04b4
+#define USB_PRODUCT_CY7C65632 0x6570
#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02
@@ -5719,6 +5721,11 @@ static const struct usb_device_id hub_id_table[] = {
.idProduct = USB_PRODUCT_USB5534B,
.bInterfaceClass = USB_CLASS_HUB,
.driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT,
+ .idVendor = USB_VENDOR_CYPRESS,
+ .idProduct = USB_PRODUCT_CY7C65632,
+ .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
{ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
| USB_DEVICE_ID_MATCH_INT_CLASS,
.idVendor = USB_VENDOR_GENESYS_LOGIC,
The Cypress CY7C65632 appears to have an issue with auto suspend and detecting devices, not too dissimilar to the SMSC 5534B hub. It is easiest to reproduce by connecting multiple mass storage devices to the hub at the same time. On a Lenovo Yoga, around 1 in 3 attempts result in the devices not being detected. It is however possible to make them appear using lsusb -v. Disabling autosuspend for this hub resolves the issue. Cc: stable@vger.kernel.org Fixes: 1208f9e1d758 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- drivers/usb/core/hub.c | 7 +++++++ 1 file changed, 7 insertions(+)