| Message ID | 20210629044305.32322-1-o.rempel@pengutronix.de (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | a3609ac24c18947737f5bc1746b8735814c521d1 |
| Headers | show |
| Series | [net-next,v1,1/1] net: usb: asix: ax88772: suspend PHY on driver probe | expand |
Hello: This patch was applied to netdev/net.git (refs/heads/master): On Tue, 29 Jun 2021 06:43:05 +0200 you wrote: > After probe/bind sequence is the PHY in active state, even if interface > is stopped. As result, on some systems like Samsung Exynos5250 SoC based Arndale > board, the ASIX PHY will be able to negotiate the link but fail to > transmit the data. > > To handle it, suspend the PHY on probe. > > [...] Here is the summary with links: - [net-next,v1,1/1] net: usb: asix: ax88772: suspend PHY on driver probe https://git.kernel.org/netdev/net/c/a3609ac24c18 You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
On 6/28/21 9:43 PM, Oleksij Rempel wrote: > After probe/bind sequence is the PHY in active state, even if interface > is stopped. As result, on some systems like Samsung Exynos5250 SoC based Arndale > board, the ASIX PHY will be able to negotiate the link but fail to > transmit the data. > > To handle it, suspend the PHY on probe. Very unusual, could not the PHY be attached/connected to a ndo_open() time like what most drivers do? > > Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> > Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > drivers/net/usb/asix_devices.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c > index aec97b021a73..2c115216420a 100644 > --- a/drivers/net/usb/asix_devices.c > +++ b/drivers/net/usb/asix_devices.c > @@ -701,6 +701,7 @@ static int ax88772_init_phy(struct usbnet *dev) > return ret; > } > > + phy_suspend(priv->phydev); > priv->phydev->mac_managed_pm = 1; > > phy_attached_info(priv->phydev); >
On Thu, Jul 01, 2021 at 12:01:04PM -0700, Florian Fainelli wrote: > On 6/28/21 9:43 PM, Oleksij Rempel wrote: > > After probe/bind sequence is the PHY in active state, even if interface > > is stopped. As result, on some systems like Samsung Exynos5250 SoC based Arndale > > board, the ASIX PHY will be able to negotiate the link but fail to > > transmit the data. > > > > To handle it, suspend the PHY on probe. > > Very unusual, could not the PHY be attached/connected to a ndo_open() > time like what most drivers do? May be this can be done to. But, should not the PHY be in the same state after phy_connect() and after phy_stop()? Currently, phy_connect() and phy_start() resume the PHY. The phy_stop() is suspending it. Since the driver calls phy_connect(), phy_start() and phy_stop(), the resume/suspend state is out of balance. In case some one will add for example something like regulator_enable/disable callbacks in to phydev->syspend/resume callbacks, this would never work. So, the question is, should phy_connect() put the PHY back in to suspend mode? Or should the MAC driver take care of this? > > > > Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > > Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> > > Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> > > --- > > drivers/net/usb/asix_devices.c | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c > > index aec97b021a73..2c115216420a 100644 > > --- a/drivers/net/usb/asix_devices.c > > +++ b/drivers/net/usb/asix_devices.c > > @@ -701,6 +701,7 @@ static int ax88772_init_phy(struct usbnet *dev) > > return ret; > > } > > > > + phy_suspend(priv->phydev); > > priv->phydev->mac_managed_pm = 1; > > > > phy_attached_info(priv->phydev); > > > > > -- > Florian > Regards, Oleksij
On 02.07.2021 05:53, Oleksij Rempel wrote: > On Thu, Jul 01, 2021 at 12:01:04PM -0700, Florian Fainelli wrote: >> On 6/28/21 9:43 PM, Oleksij Rempel wrote: >>> After probe/bind sequence is the PHY in active state, even if interface >>> is stopped. As result, on some systems like Samsung Exynos5250 SoC based Arndale >>> board, the ASIX PHY will be able to negotiate the link but fail to >>> transmit the data. >>> >>> To handle it, suspend the PHY on probe. >> >> Very unusual, could not the PHY be attached/connected to a ndo_open() >> time like what most drivers do? > > May be this can be done to. > But, should not the PHY be in the same state after phy_connect() and after > phy_stop()? > > Currently, phy_connect() and phy_start() resume the PHY. The phy_stop() > is suspending it. Since the driver calls phy_connect(), phy_start() and > phy_stop(), the resume/suspend state is out of balance. At least currently there is no requirement that phy_resume()/phy_suspend() calls have to be balanced. Drivers must be able to deal with this. However phy_suspend() checks the state of phydev->suspended and skips the suspend callback if set. > In case some one will add for example something like regulator_enable/disable > callbacks in to phydev->syspend/resume callbacks, this would never work. > > So, the question is, should phy_connect() put the PHY back in to suspend > mode? Or should the MAC driver take care of this? > >>> >>> Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") >>> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> >>> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> >>> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> >>> --- >>> drivers/net/usb/asix_devices.c | 1 + >>> 1 file changed, 1 insertion(+) >>> >>> diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c >>> index aec97b021a73..2c115216420a 100644 >>> --- a/drivers/net/usb/asix_devices.c >>> +++ b/drivers/net/usb/asix_devices.c >>> @@ -701,6 +701,7 @@ static int ax88772_init_phy(struct usbnet *dev) >>> return ret; >>> } >>> >>> + phy_suspend(priv->phydev); >>> priv->phydev->mac_managed_pm = 1; >>> >>> phy_attached_info(priv->phydev); >>> >> >> >> -- >> Florian >> > > Regards, > Oleksij >
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index aec97b021a73..2c115216420a 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -701,6 +701,7 @@ static int ax88772_init_phy(struct usbnet *dev) return ret; } + phy_suspend(priv->phydev); priv->phydev->mac_managed_pm = 1; phy_attached_info(priv->phydev);
After probe/bind sequence is the PHY in active state, even if interface is stopped. As result, on some systems like Samsung Exynos5250 SoC based Arndale board, the ASIX PHY will be able to negotiate the link but fail to transmit the data. To handle it, suspend the PHY on probe. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> --- drivers/net/usb/asix_devices.c | 1 + 1 file changed, 1 insertion(+)