usb: gadget: u_audio: EP-OUT bInterval in fback frequency

Commit Message

Pavel Hofman Sept. 6, 2021, 1:08 p.m. UTC

The patch increases the bitshift in feedback frequency
calculation with EP-OUT bInterval value.

Tests have revealed that Win10 and OSX UAC2 drivers require
the feedback frequency to be based on the actual packet
interval instead of on the USB2 microframe. Otherwise they
ignore the feedback value. Linux snd-usb-audio driver
detects the applied bitshift automatically.

Signed-off-by: Pavel Hofman <[e-mail]>
Tested-by: Henrik Enquist <[e-mail]>
---
 drivers/usb/gadget/function/u_audio.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

Patch

diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
index f6b5b9547236..d2eef7d76981 100644
--- a/drivers/usb/gadget/function/u_audio.c
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -96,11 +96,13 @@  static const struct snd_pcm_hardware uac_pcm_hardware = {
 };
 
 static void u_audio_set_fback_frequency(enum usb_device_speed speed,
+					struct usb_ep *out_ep,
 					unsigned long long freq,
 					unsigned int pitch,
 					void *buf)
 {
 	u32 ff = 0;
+	const struct usb_endpoint_descriptor *ep_desc;
 
 	/*
 	 * Because the pitch base is 1000000, the final divider here
@@ -128,8 +130,13 @@  static void u_audio_set_fback_frequency(enum usb_device_speed speed,
 		 * byte fromat (that is Q16.16)
 		 *
 		 * ff = (freq << 16) / 8000
+		 *
+		 * Win10 and OSX UAC2 drivers require number of samples per packet
+		 * in order to honor the feedback value.
+		 * Linux snd-usb-audio detects the applied bit-shift automatically.
 		 */
-		freq <<= 4;
+		ep_desc = out_ep->desc;
+		freq <<= 4 + (ep_desc->bInterval - 1);
 	}
 
 	ff = DIV_ROUND_CLOSEST_ULL((freq * pitch), 1953125);
@@ -261,7 +268,7 @@  static void u_audio_iso_fback_complete(struct usb_ep *ep,
 		pr_debug("%s: iso_complete status(%d) %d/%d\n",
 			__func__, status, req->actual, req->length);
 
-	u_audio_set_fback_frequency(audio_dev->gadget->speed,
+	u_audio_set_fback_frequency(audio_dev->gadget->speed, audio_dev->out_ep,
 				    params->c_srate, prm->pitch,
 				    req->buf);
 
@@ -519,7 +526,7 @@  int u_audio_start_capture(struct g_audio *audio_dev)
 	 * be meauserd at start of playback
 	 */
 	prm->pitch = 1000000;
-	u_audio_set_fback_frequency(audio_dev->gadget->speed,
+	u_audio_set_fback_frequency(audio_dev->gadget->speed, ep,
 				    params->c_srate, prm->pitch,
 				    req_fback->buf);