diff mbox series

[v4,04/14] dt-bindings: rtc: add bindings for microchip mpfs rtc

Message ID 20220117110755.3433142-5-conor.dooley@microchip.com (mailing list archive)
State New, archived
Headers show
Series Update the Icicle Kit device tree | expand

Commit Message

Conor Dooley Jan. 17, 2022, 11:07 a.m. UTC
From: Conor Dooley <conor.dooley@microchip.com>

Add device tree bindings for the real time clock on
the Microchip PolarFire SoC.

Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../bindings/rtc/microchip,mfps-rtc.yaml      | 63 +++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml

Comments

Rob Herring (Arm) Jan. 19, 2022, 3:12 a.m. UTC | #1
On Mon, Jan 17, 2022 at 11:07:45AM +0000, conor.dooley@microchip.com wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
> 
> Add device tree bindings for the real time clock on
> the Microchip PolarFire SoC.
> 
> Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> ---
>  .../bindings/rtc/microchip,mfps-rtc.yaml      | 63 +++++++++++++++++++
>  1 file changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
> new file mode 100644
> index 000000000000..d57460cbe5e3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/microchip,mfps-rtc.yaml#
> +
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip PolarFire Soc (MPFS) RTC Device Tree Bindings
> +
> +allOf:
> +  - $ref: rtc.yaml#
> +
> +maintainers:
> +  - Daire McNamara <daire.mcnamara@microchip.com>
> +  - Lewis Hanly <lewis.hanly@microchip.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - microchip,mpfs-rtc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 2

Need to define what each one is.

> +
> +  microchip,prescaler:
> +    description: |
> +      The prescaler divides the input frequency to create a time-based strobe (typically 1 Hz) for
> +      the calendar counter. The Alarm and Compare Registers, in conjunction with the calendar
> +      counter, facilitate time-matched events. To properly operate in Calendar or Binary mode,
> +      the 26-bit prescaler must be programmed to generate a strobe to the RTC.
> +    maxItems: 1
> +    $ref: /schemas/types.yaml#/definitions/uint32

Can't you calculate this based on the clock input freq?

> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: rtc
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/microchip,mpfs-clock.h>
> +    rtc@20124000 {
> +        compatible = "microchip,mpfs-rtc";
> +        reg = <0x20124000 0x1000>;
> +        clocks = <&clkcfg CLK_RTC>;
> +        clock-names = "rtc";
> +        interrupts = <80>, <81>;
> +    };
> +...
> -- 
> 2.32.0
> 
>
Conor Dooley Jan. 19, 2022, 10:47 a.m. UTC | #2
On 19/01/2022 03:12, Rob Herring wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On Mon, Jan 17, 2022 at 11:07:45AM +0000, conor.dooley@microchip.com wrote:
>> From: Conor Dooley <conor.dooley@microchip.com>
>>
>> Add device tree bindings for the real time clock on
>> the Microchip PolarFire SoC.
>>
>> Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
>> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
>> ---
>>   .../bindings/rtc/microchip,mfps-rtc.yaml      | 63 +++++++++++++++++++
>>   1 file changed, 63 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
>> new file mode 100644
>> index 000000000000..d57460cbe5e3
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
>> @@ -0,0 +1,63 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/rtc/microchip,mfps-rtc.yaml#
>> +
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Microchip PolarFire Soc (MPFS) RTC Device Tree Bindings
>> +
>> +allOf:
>> +  - $ref: rtc.yaml#
>> +
>> +maintainers:
>> +  - Daire McNamara <daire.mcnamara@microchip.com>
>> +  - Lewis Hanly <lewis.hanly@microchip.com>
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - microchip,mpfs-rtc
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 2
> 
> Need to define what each one is.
Sure.
> 
>> +
>> +  microchip,prescaler:
>> +    description: |
>> +      The prescaler divides the input frequency to create a time-based strobe (typically 1 Hz) for
>> +      the calendar counter. The Alarm and Compare Registers, in conjunction with the calendar
>> +      counter, facilitate time-matched events. To properly operate in Calendar or Binary mode,
>> +      the 26-bit prescaler must be programmed to generate a strobe to the RTC.
>> +    maxItems: 1
>> +    $ref: /schemas/types.yaml#/definitions/uint32
> 
> Can't you calculate this based on the clock input freq?

I mistakenly thought this was set when the bitstream was programmed to 
the FPGA but it is just an APB register & should be calculated. I'll 
drop the property.

> 
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  clock-names:
>> +    items:
>> +      - const: rtc
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +  - clocks
>> +  - clock-names
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/clock/microchip,mpfs-clock.h>
>> +    rtc@20124000 {
>> +        compatible = "microchip,mpfs-rtc";
>> +        reg = <0x20124000 0x1000>;
>> +        clocks = <&clkcfg CLK_RTC>;
>> +        clock-names = "rtc";
>> +        interrupts = <80>, <81>;
>> +    };
>> +...
>> --
>> 2.32.0
>>
>>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
new file mode 100644
index 000000000000..d57460cbe5e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
@@ -0,0 +1,63 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/microchip,mfps-rtc.yaml#
+
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire Soc (MPFS) RTC Device Tree Bindings
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+  - Lewis Hanly <lewis.hanly@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpfs-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  microchip,prescaler:
+    description: |
+      The prescaler divides the input frequency to create a time-based strobe (typically 1 Hz) for
+      the calendar counter. The Alarm and Compare Registers, in conjunction with the calendar
+      counter, facilitate time-matched events. To properly operate in Calendar or Binary mode,
+      the 26-bit prescaler must be programmed to generate a strobe to the RTC.
+    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rtc
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/microchip,mpfs-clock.h>
+    rtc@20124000 {
+        compatible = "microchip,mpfs-rtc";
+        reg = <0x20124000 0x1000>;
+        clocks = <&clkcfg CLK_RTC>;
+        clock-names = "rtc";
+        interrupts = <80>, <81>;
+    };
+...