[v3] usb: dwc3: gadget: move cmd_endtransfer to extra function

Commit Message

Michael Grzeschik March 5, 2022, 12:53 a.m. UTC

This patch adds the extra function __dwc3_stop_active_transfer to
consolidate the same codepath.

Signed-off-by: Michael Grzeschik <[e-mail]>

---
v1 -> v2: - renamed the function to __dwc3_stop_active_transfer
          - added function description
v2 -> v3: - fixed spelling and removed extra line
	  - make __dwc3_stop_active_transfer return ret
	  - use ret in __dwc3_gadget_start_isoc
---
 drivers/usb/dwc3/gadget.c | 69 +++++++++++++++++++++------------------
 1 file changed, 37 insertions(+), 32 deletions(-)

Comments

Greg KH March 6, 2022, 1:57 p.m. UTC | #1

On Sat, Mar 05, 2022 at 01:53:56AM +0100, Michael Grzeschik wrote:
> This patch adds the extra function __dwc3_stop_active_transfer to
> consolidate the same codepath.
> 
> Signed-off-by: Michael Grzeschik <[e-mail]>
> 
> ---
> v1 -> v2: - renamed the function to __dwc3_stop_active_transfer
>           - added function description
> v2 -> v3: - fixed spelling and removed extra line
> 	  - make __dwc3_stop_active_transfer return ret
> 	  - use ret in __dwc3_gadget_start_isoc

So is this v3 of a single patch in this series, or the whole series?

I'm totally confused, please resend the whole, updated series, as v4
please.

thanks,

greg k-h

Patch

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 37dbf6132731b7..bd9d8494c90b73 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1673,6 +1673,40 @@  static int __dwc3_gadget_get_frame(struct dwc3 *dwc)
 	return DWC3_DSTS_SOFFN(reg);
 }
 
+/**
+ * __dwc3_stop_active_transfer - stop the current active transfer
+ * @dep: isoc endpoint
+ * @force: set forcerm bit in the command
+ * @interrupt: command complete interrupt after End Transfer command
+ *
+ * When setting force, the ForceRM bit will be set. In that case
+ * the controller won't update the TRB progress on command
+ * completion. It also won't clear the HWO bit in the TRB.
+ * The command will also not complete immediately in that case.
+ */
+static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	u32 cmd;
+	int ret;
+
+	cmd = DWC3_DEPCMD_ENDTRANSFER;
+	cmd |= force ? DWC3_DEPCMD_HIPRI_FORCERM : 0;
+	cmd |= interrupt ? DWC3_DEPCMD_CMDIOC : 0;
+	cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
+	memset(&params, 0, sizeof(params));
+	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
+	WARN_ON_ONCE(ret);
+	dep->resource_index = 0;
+
+	if (!interrupt)
+		dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
+	else if (!ret)
+		dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
+
+	return ret;
+}
+
 /**
  * dwc3_gadget_start_isoc_quirk - workaround invalid frame number
  * @dep: isoc endpoint
@@ -1842,21 +1876,8 @@  static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep)
 	 * status, issue END_TRANSFER command and retry on the next XferNotReady
 	 * event.
 	 */
-	if (ret == -EAGAIN) {
-		struct dwc3_gadget_ep_cmd_params params;
-		u32 cmd;
-
-		cmd = DWC3_DEPCMD_ENDTRANSFER |
-			DWC3_DEPCMD_CMDIOC |
-			DWC3_DEPCMD_PARAM(dep->resource_index);
-
-		dep->resource_index = 0;
-		memset(&params, 0, sizeof(params));
-
-		ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
-		if (!ret)
-			dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
-	}
+	if (ret == -EAGAIN)
+		ret = __dwc3_stop_active_transfer(dep, false, true);
 
 	return ret;
 }
@@ -3597,10 +3618,6 @@  static void dwc3_reset_gadget(struct dwc3 *dwc)
 static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
 	bool interrupt)
 {
-	struct dwc3_gadget_ep_cmd_params params;
-	u32 cmd;
-	int ret;
-
 	if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) ||
 	    (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
 		return;
@@ -3632,19 +3649,7 @@  static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
 	 * This mode is NOT available on the DWC_usb31 IP.
 	 */
 
-	cmd = DWC3_DEPCMD_ENDTRANSFER;
-	cmd |= force ? DWC3_DEPCMD_HIPRI_FORCERM : 0;
-	cmd |= interrupt ? DWC3_DEPCMD_CMDIOC : 0;
-	cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
-	memset(&params, 0, sizeof(params));
-	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
-	WARN_ON_ONCE(ret);
-	dep->resource_index = 0;
-
-	if (!interrupt)
-		dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
-	else
-		dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
+	__dwc3_stop_active_transfer(dep, force, interrupt);
 }
 
 static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)