| Message ID | 20220831081525.30557-3-johan@kernel.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 41ca302a697b64a3dab4676e01d0d11bb184737d |
| Headers | show |
| Series | USB: serial: ch341: fixes for older devices | expand |
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 2bcce172355b..af01a462cc43 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -253,8 +253,12 @@ static int ch341_set_baudrate_lcr(struct usb_device *dev, /* * CH341A buffers data until a full endpoint-size packet (32 bytes) * has been received unless bit 7 is set. + * + * At least one device with version 0x27 appears to have this bit + * inverted. */ - val |= BIT(7); + if (priv->version > 0x27) + val |= BIT(7); r = ch341_control_out(dev, CH341_REQ_WRITE_REG, CH341_REG_DIVISOR << 8 | CH341_REG_PRESCALER,
At least one older CH341 appears to have the RX timer enable bit inverted so that setting it disables the RX timer and prevents the FIFO from emptying until it is full. Only set the RX timer enable bit for devices with version newer than 0x27 (even though this probably affects all pre-0x30 devices). Reported-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan@kernel.org> --- drivers/usb/serial/ch341.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)