| Message ID | 20221027053407.421783-1-rekanorman@chromium.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-N | expand |
On Thu, Oct 27, 2022 at 04:34:07PM +1100, Reka Norman wrote: > ADL-N systems have the same issue as ADL-P, where a large boot firmware > delay is seen if USB ports are left in U3 at shutdown. So apply the > XHCI_RESET_TO_DEFAULT quirk to ADL-N as well. > > This patch depends on "xhci: Add quirk to reset host back to default > state at shutdown". What is the git commit id of that change? And is this needed in stable kernels? If so, how far back? thanks, greg k-h
On Thu, Oct 27, 2022 at 5:11 PM Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote: > > On Thu, Oct 27, 2022 at 04:34:07PM +1100, Reka Norman wrote: > > ADL-N systems have the same issue as ADL-P, where a large boot firmware > > delay is seen if USB ports are left in U3 at shutdown. So apply the > > XHCI_RESET_TO_DEFAULT quirk to ADL-N as well. > > > > This patch depends on "xhci: Add quirk to reset host back to default > > state at shutdown". > > What is the git commit id of that change? It hasn't been merged in mainline yet, only in the xhci tree: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/commit/?id=feb0b04b09c82589af65c84398b7d3fefaa7b7ac&head=for-usb-linus Should I add the commit id from there? Or add the lore link? > > And is this needed in stable kernels? If so, how far back? Sorry, I'm not sure how to answer that properly. It looks like most ADL-N support was added starting from 5.16. The issue it fixes is a ~20s boot delay in the specific case of booting from S5. It probably makes sense for it to go wherever the ADL-P patch goes. > > thanks, > > greg k-h
On Fri, Oct 28, 2022 at 10:56:56AM +1100, Reka Norman wrote: > On Thu, Oct 27, 2022 at 5:11 PM Greg Kroah-Hartman > <gregkh@linuxfoundation.org> wrote: > > > > On Thu, Oct 27, 2022 at 04:34:07PM +1100, Reka Norman wrote: > > > ADL-N systems have the same issue as ADL-P, where a large boot firmware > > > delay is seen if USB ports are left in U3 at shutdown. So apply the > > > XHCI_RESET_TO_DEFAULT quirk to ADL-N as well. > > > > > > This patch depends on "xhci: Add quirk to reset host back to default > > > state at shutdown". > > > > What is the git commit id of that change? > > It hasn't been merged in mainline yet, only in the xhci tree: > https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/commit/?id=feb0b04b09c82589af65c84398b7d3fefaa7b7ac&head=for-usb-linus > Should I add the commit id from there? Or add the lore link? This is in linux-next already as 34cd2db408d5 ("xhci: Add quirk to reset host back to default state at shutdown") right? Please use that. > > And is this needed in stable kernels? If so, how far back? > > Sorry, I'm not sure how to answer that properly. > It looks like most ADL-N support was added starting from 5.16. > The issue it fixes is a ~20s boot delay in the specific case of booting from S5. > It probably makes sense for it to go wherever the ADL-P patch goes. Then properly mark it with that information. thanks, greg k-h
On Fri, Oct 28, 2022 at 5:10 PM Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote: > > On Fri, Oct 28, 2022 at 10:56:56AM +1100, Reka Norman wrote: > > On Thu, Oct 27, 2022 at 5:11 PM Greg Kroah-Hartman > > <gregkh@linuxfoundation.org> wrote: > > > > > > On Thu, Oct 27, 2022 at 04:34:07PM +1100, Reka Norman wrote: > > > > ADL-N systems have the same issue as ADL-P, where a large boot firmware > > > > delay is seen if USB ports are left in U3 at shutdown. So apply the > > > > XHCI_RESET_TO_DEFAULT quirk to ADL-N as well. > > > > > > > > This patch depends on "xhci: Add quirk to reset host back to default > > > > state at shutdown". > > > > > > What is the git commit id of that change? > > > > It hasn't been merged in mainline yet, only in the xhci tree: > > https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/commit/?id=feb0b04b09c82589af65c84398b7d3fefaa7b7ac&head=for-usb-linus > > Should I add the commit id from there? Or add the lore link? > > This is in linux-next already as 34cd2db408d5 ("xhci: Add quirk to reset > host back to default state at shutdown") right? Yes it is, my bad. Added in v2. > > Please use that. > > > > And is this needed in stable kernels? If so, how far back? > > > > Sorry, I'm not sure how to answer that properly. > > It looks like most ADL-N support was added starting from 5.16. > > The issue it fixes is a ~20s boot delay in the specific case of booting from S5. > > It probably makes sense for it to go wherever the ADL-P patch goes. > > Then properly mark it with that information. Done in v2. Thanks. > > thanks, > > greg k-h
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 7bccbe50bab15..f98cf30a3c1a5 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -59,6 +59,7 @@ #define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13 #define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI 0x51ed +#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI 0x54ed #define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 @@ -246,7 +247,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_MISSING_CAS; if (pdev->vendor == PCI_VENDOR_ID_INTEL && - pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI) + (pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI)) xhci->quirks |= XHCI_RESET_TO_DEFAULT; if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
ADL-N systems have the same issue as ADL-P, where a large boot firmware delay is seen if USB ports are left in U3 at shutdown. So apply the XHCI_RESET_TO_DEFAULT quirk to ADL-N as well. This patch depends on "xhci: Add quirk to reset host back to default state at shutdown". Signed-off-by: Reka Norman <rekanorman@chromium.org> --- drivers/usb/host/xhci-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)