new file mode 100644
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * linux/sound/q6usboffload.h -- QDSP6 USB offload
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/**
+ * struct q6usb_offload
+ * @dev - dev handle to usb be
+ * @sid - streamID for iommu
+ * @intr_num - usb interrupter number
+ * @domain - allocated iommu domain
+ **/
+struct q6usb_offload {
+ struct device *dev;
+ u32 sid;
+ u32 intr_num;
+ struct iommu_domain *domain;
+};
@@ -111,6 +111,9 @@ config SND_SOC_QDSP6_APM
config SND_SOC_QDSP6_PRM_LPASS_CLOCKS
tristate
+config SND_SOC_QDSP6_USB
+ tristate
+
config SND_SOC_QDSP6_PRM
tristate
select SND_SOC_QDSP6_PRM_LPASS_CLOCKS
@@ -131,6 +134,7 @@ config SND_SOC_QDSP6
select SND_SOC_TOPOLOGY
select SND_SOC_QDSP6_APM
select SND_SOC_QDSP6_PRM
+ select SND_SOC_QDSP6_USB
help
To add support for MSM QDSP6 Soc Audio.
This will enable sound soc platform specific
@@ -17,3 +17,4 @@ obj-$(CONFIG_SND_SOC_QDSP6_APM_DAI) += q6apm-dai.o
obj-$(CONFIG_SND_SOC_QDSP6_APM_LPASS_DAI) += q6apm-lpass-dais.o
obj-$(CONFIG_SND_SOC_QDSP6_PRM) += q6prm.o
obj-$(CONFIG_SND_SOC_QDSP6_PRM_LPASS_CLOCKS) += q6prm-clocks.o
+obj-$(CONFIG_SND_SOC_QDSP6_USB) += q6usb.o
new file mode 100644
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/iommu.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma-map-ops.h>
+
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-usb.h>
+#include <sound/pcm_params.h>
+#include <sound/asound.h>
+#include <sound/q6usboffload.h>
+
+#include "q6dsp-lpass-ports.h"
+#include "q6afe.h"
+
+struct q6usb_port_data {
+ struct q6afe_usb_cfg usb_cfg;
+ struct snd_soc_usb *usb;
+ struct q6usb_offload priv;
+ int active_idx;
+};
+
+static const struct snd_soc_dapm_widget q6usb_dai_widgets[] = {
+ SND_SOC_DAPM_HP("USB_RX_BE", NULL),
+};
+
+static const struct snd_soc_dapm_route q6usb_dapm_routes[] = {
+ {"USB Playback", NULL, "USB_RX_BE"},
+};
+
+static int q6usb_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ return 0;
+}
+static const struct snd_soc_dai_ops q6usb_ops = {
+ .hw_params = q6usb_hw_params,
+};
+
+static struct snd_soc_dai_driver q6usb_be_dais[] = {
+ {
+ .playback = {
+ .stream_name = "USB BE RX",
+ .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |
+ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
+ SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE |
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE |
+ SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE,
+ .channels_min = 1,
+ .channels_max = 2,
+ .rate_max = 192000,
+ .rate_min = 8000,
+ },
+ .id = USB_RX,
+ .name = "USB_RX_BE",
+ .ops = &q6usb_ops,
+ },
+};
+
+static int q6usb_audio_ports_of_xlate_dai_name(struct snd_soc_component *component,
+ const struct of_phandle_args *args,
+ const char **dai_name)
+{
+ int id = args->args[0];
+ int ret = -EINVAL;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(q6usb_be_dais); i++) {
+ if (q6usb_be_dais[i].id == id) {
+ *dai_name = q6usb_be_dais[i].name;
+ ret = 0;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int q6usb_component_probe(struct snd_soc_component *component)
+{
+ struct q6usb_port_data *data = dev_get_drvdata(component->dev);
+ struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
+
+ data->usb->component = component;
+
+ snd_soc_dapm_disable_pin(dapm, "USB_RX_BE");
+ snd_soc_dapm_sync(dapm);
+
+ return 0;
+}
+
+static const struct snd_soc_component_driver q6usb_dai_component = {
+ .probe = q6usb_component_probe,
+ .name = "q6usb-dai-component",
+ .dapm_widgets = q6usb_dai_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(q6usb_dai_widgets),
+ .dapm_routes = q6usb_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(q6usb_dapm_routes),
+ .of_xlate_dai_name = q6usb_audio_ports_of_xlate_dai_name,
+};
+
+static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb, int card_idx,
+ int connected)
+{
+ struct snd_soc_dapm_context *dapm;
+ struct q6usb_port_data *data;
+
+ /* Check if routes to the backend have not yet been established */
+ if (!usb->component)
+ return -ENODEV;
+
+ dapm = snd_soc_component_get_dapm(usb->component);
+ data = dev_get_drvdata(usb->component->dev);
+
+ if (connected) {
+ snd_soc_dapm_enable_pin(dapm, "USB_RX_BE");
+ /* We only track the latest USB headset plugged in */
+ data->active_idx = card_idx;
+ } else {
+ snd_soc_dapm_disable_pin(dapm, "USB_RX_BE");
+ }
+ snd_soc_dapm_sync(dapm);
+
+ return 0;
+}
+
+static int q6usb_dai_dev_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct q6usb_port_data *data;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ ret = of_property_read_u32(node, "qcom,usb-audio-stream-id",
+ &data->priv.sid);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read sid.\n");
+ return -ENODEV;
+ }
+
+ ret = of_property_read_u32(node, "qcom,usb-audio-intr-num",
+ &data->priv.intr_num);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read intr num.\n");
+ return -ENODEV;
+ }
+
+ data->priv.domain = iommu_domain_alloc(pdev->dev.bus);
+ if (!data->priv.domain) {
+ dev_err(&pdev->dev, "failed to allocate iommu domain\n");
+ return -ENODEV;
+ }
+
+ /* attach to external processor iommu */
+ ret = iommu_attach_device(data->priv.domain, &pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to attach device ret = %d\n", ret);
+ goto free_domain;
+ }
+
+ data->usb = snd_soc_usb_add_port(dev, q6usb_alsa_connection_cb);
+ if (IS_ERR(data->usb)) {
+ dev_err(&pdev->dev, "failed to add usb port\n");
+ goto detach_device;
+ }
+
+ data->priv.dev = dev;
+ dev_set_drvdata(dev, data);
+ devm_snd_soc_register_component(dev, &q6usb_dai_component,
+ q6usb_be_dais, ARRAY_SIZE(q6usb_be_dais));
+ snd_soc_usb_set_priv_data(dev, &data->priv);
+
+ return 0;
+
+detach_device:
+ iommu_detach_device(data->priv.domain, &pdev->dev);
+free_domain:
+ iommu_domain_free(data->priv.domain);
+
+ return ret;
+}
+
+static int q6usb_dai_dev_remove(struct platform_device *pdev)
+{
+ struct q6usb_port_data *data = platform_get_drvdata(pdev);
+
+ iommu_detach_device(data->priv.domain, &pdev->dev);
+ iommu_domain_free(data->priv.domain);
+
+ snd_soc_usb_remove_port(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id q6usb_dai_device_id[] = {
+ { .compatible = "qcom,q6usb-dais" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, q6usb_dai_device_id);
+
+static struct platform_driver q6usb_dai_platform_driver = {
+ .driver = {
+ .name = "q6usb-dai",
+ .of_match_table = of_match_ptr(q6usb_dai_device_id),
+ },
+ .probe = q6usb_dai_dev_probe,
+ .remove = q6usb_dai_dev_remove,
+};
+module_platform_driver(q6usb_dai_platform_driver);
+
+MODULE_DESCRIPTION("Q6 USB backend dai driver");
+MODULE_LICENSE("GPL");
Create a USB BE component that will register a new USB port to the ASoC USB framework. This will handle determination on if the requested audio profile is supported by the USB device currently selected. Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> --- include/sound/q6usboffload.h | 20 +++ sound/soc/qcom/Kconfig | 4 + sound/soc/qcom/qdsp6/Makefile | 1 + sound/soc/qcom/qdsp6/q6usb.c | 231 ++++++++++++++++++++++++++++++++++ 4 files changed, 256 insertions(+) create mode 100644 include/sound/q6usboffload.h create mode 100644 sound/soc/qcom/qdsp6/q6usb.c