@@ -164,16 +164,6 @@ static void xhci_histb_host_disable(struct xhci_hcd_histb *histb)
clk_disable_unprepare(histb->bus_clk);
}
-static void xhci_histb_quirks(struct device *dev, struct xhci_hcd *xhci)
-{
- /*
- * As of now platform drivers don't provide MSI support so we ensure
- * here that the generic code does not try to make a pci_dev from our
- * dev struct in order to setup MSI
- */
- xhci->quirks |= XHCI_PLAT;
-}
-
/* called during probe() after chip reset completes */
static int xhci_histb_setup(struct usb_hcd *hcd)
{
@@ -186,7 +176,7 @@ static int xhci_histb_setup(struct usb_hcd *hcd)
return ret;
}
- return xhci_gen_setup(hcd, xhci_histb_quirks);
+ return xhci_gen_setup(hcd, NULL);
}
static const struct xhci_driver_overrides xhci_histb_overrides __initconst = {
@@ -418,12 +418,6 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci)
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
- /*
- * As of now platform drivers don't provide MSI support so we ensure
- * here that the generic code does not try to make a pci_dev from our
- * dev struct in order to setup MSI
- */
- xhci->quirks |= XHCI_PLAT;
xhci->quirks |= XHCI_MTK_HOST;
/*
* MTK host controller gives a spurious successful event after a
@@ -108,9 +108,6 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci)
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
- if (xhci->quirks & XHCI_PLAT)
- return;
-
/* return if using legacy interrupt */
if (hcd->irq > 0)
return;
@@ -208,10 +205,6 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
struct pci_dev *pdev;
int ret;
- /* The xhci platform device has set up IRQs through usb_add_hcd. */
- if (xhci->quirks & XHCI_PLAT)
- return 0;
-
pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
/*
* Some Fresco Logic host controllers advertise MSI, but fail to
@@ -78,12 +78,7 @@ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
{
struct xhci_plat_priv *priv = xhci_to_priv(xhci);
- /*
- * As of now platform drivers don't provide MSI support so we ensure
- * here that the generic code does not try to make a pci_dev from our
- * dev struct in order to setup MSI
- */
- xhci->quirks |= XHCI_PLAT | priv->quirks;
+ xhci->quirks |= priv->quirks;
}
/* called during probe() after chip reset completes */
@@ -2663,7 +2663,6 @@ static void tegra_xhci_quirks(struct device *dev, struct xhci_hcd *xhci)
{
struct tegra_xusb *tegra = dev_get_drvdata(dev);
- xhci->quirks |= XHCI_PLAT;
if (tegra && tegra->soc->lpm_support)
xhci->quirks |= XHCI_LPM_SUPPORT;
}
@@ -1874,7 +1874,7 @@ struct xhci_hcd {
#define XHCI_SPURIOUS_REBOOT BIT_ULL(13)
#define XHCI_COMP_MODE_QUIRK BIT_ULL(14)
#define XHCI_AVOID_BEI BIT_ULL(15)
-#define XHCI_PLAT BIT_ULL(16)
+#define XHCI_PLAT BIT_ULL(16) /* Deprecated */
#define XHCI_SLOW_SUSPEND BIT_ULL(17)
#define XHCI_SPURIOUS_WAKEUP BIT_ULL(18)
/* For controllers with a broken beyond repair streams implementation */
The XHCI_PLAT quirk was only needed to ensure non-PCI xHC host avoided setting up MSI interrupts in generic xhci codepaths. The MSI setup code is now moved to PCI specific xhci-pci.c file so the quirk is no longer needed. Remove setting the XHCI_PLAT quirk for HiSilocon SoC xHC, NVIDIA Tegra xHC, MediaTek xHC, the generic xhci-plat driver, and the checks for XHCI_PLAT in xhci-pci.c MSI setup code. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> --- drivers/usb/host/xhci-histb.c | 12 +----------- drivers/usb/host/xhci-mtk.c | 6 ------ drivers/usb/host/xhci-pci.c | 7 ------- drivers/usb/host/xhci-plat.c | 7 +------ drivers/usb/host/xhci-tegra.c | 1 - drivers/usb/host/xhci.h | 2 +- 6 files changed, 3 insertions(+), 32 deletions(-)