@@ -175,13 +175,13 @@ struct usb_ep_ops {
* @dir_out:Endpoint supports OUT direction.
*/
struct usb_ep_caps {
- unsigned type_control:1;
- unsigned type_iso:1;
- unsigned type_bulk:1;
- unsigned type_int:1;
- unsigned dir_in:1;
- unsigned dir_out:1;
-};
+ u8 type_control:1;
+ u8 type_iso:1;
+ u8 type_bulk:1;
+ u8 type_int:1;
+ u8 dir_in:1;
+ u8 dir_out:1;
+} __packed;
#define USB_EP_CAPS_TYPE_CONTROL 0x01
#define USB_EP_CAPS_TYPE_ISO 0x02
@@ -211,6 +211,11 @@ struct usb_ep_caps {
* @caps:The structure describing types and directions supported by endpoint.
* @enabled: The current endpoint enabled/disabled state.
* @claimed: True if this endpoint is claimed by a function.
+ * @dw1: trace event purpose
+ * @dw2: trace event purpose
+ * @epnum: trace event purpose
+ * @u1: trace event purpose
+ * @u2: trace event purpose
* @maxpacket:The maximum packet size used on this endpoint. The initial
* value can sometimes be reduced (hardware allowing), according to
* the endpoint descriptor used to configure the endpoint.
@@ -240,19 +245,56 @@ struct usb_ep {
const char *name;
const struct usb_ep_ops *ops;
struct list_head ep_list;
- struct usb_ep_caps caps;
- bool claimed;
- bool enabled;
- unsigned maxpacket:16;
- unsigned maxpacket_limit:16;
- unsigned max_streams:16;
- unsigned mult:2;
- unsigned maxburst:5;
- u8 address;
+ union {
+ struct {
+ u32 maxpacket:16;
+ u32 maxpacket_limit:16;
+ u32 max_streams:16;
+ u32 mult:2;
+ u32 maxburst:5;
+ } __packed;
+ struct {
+ u32 dw1;
+ u32 dw2;
+ };
+#define USB_EP_MAXPACKET(n) ((n) & 0xffff)
+#define USB_EP_MAXPACKET_LIMIT(n) (((n) >> 16) & 0xffff)
+#define USB_EP_MAX_STREAMS(n) ((n) & 0xffff)
+#define USB_EP_MULT(n) (((n) >> 16) & 0x3)
+#define USB_EP_MAXBURST(n) (((n) >> 18) & 0x1f)
+ };
+ union {
+ struct {
+ union {
+ struct usb_ep_caps caps;
+ u8 u1;
+ };
+ union {
+ struct {
+ u8 claimed:1;
+ u8 enabled:1;
+ } __packed;
+ u8 u2;
+ };
+ u8 address;
+ u8 epnum;
+ } __packed;
+ u32 dw3;
+#define USB_EP_NUM(n) (((n) >> 24) & 0xff)
+#define USB_EP_DIR_BI(n) ((((n) >> 4) & 0x3) == 0x3)
+#define USB_EP_DIR_IN(n) (((n) >> 4) & 0x1)
+ };
const struct usb_endpoint_descriptor *desc;
const struct usb_ss_ep_comp_descriptor *comp_desc;
};
+/* NOTE: it need UDC set epnum and dir info when init endpoints */
+#define USB_EP_NAME(n) \
+ ({char __s[9]; /* max 8: ep127out */\
+ snprintf(__s, 9, "ep%d%s", USB_EP_NUM(n), \
+ USB_EP_DIR_BI(n) ? "" : (USB_EP_DIR_IN(n) ? "in" : "out"));\
+ __s; })
+
/*-------------------------------------------------------------------------*/
#if IS_ENABLED(CONFIG_USB_GADGET)
Some UDC trace event will save usb endpoint information, but it will use one int size buffer to save one bit information of usb endpoint, so more than one int buffer to save several bit fields which is not good. Add some anonymous union have three u32 members which can be used by trace event during fast assign stage to reduce trace buffer usage, and add related macro to extract bit fields from u32 members for later trace event output state usage. Also move exist maxpacket and other bit field into anonymous struct which inside anonymous union and Change them from unsigned to u32 type. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> --- include/linux/usb/gadget.h | 74 +++++++++++++++++++++++++++++--------- 1 file changed, 58 insertions(+), 16 deletions(-)