diff mbox series

usb: gadget: u_audio: initialize spinlocks

Message ID 20231002064231.2336627-1-m.grzeschik@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series usb: gadget: u_audio: initialize spinlocks | expand

Commit Message

Michael Grzeschik Oct. 2, 2023, 6:42 a.m. UTC
When using uac2 with lockdep enabled, the kernel is throwing this
message, due to uninitialized spinlocks. We initialize them now.

[   24.668867] The code is fine but needs lockdep annotation, or maybe
[   24.675878] you didn't initialize this object before use?
[   24.681910] turning off the locking correctness validator.
[   24.688038] CPU: 0 PID: 348 Comm: irq/43-dwc3 Tainted: G         C         6.5.0-20230919-1+ #14
[   24.697866] Hardware name: WolfVision PF5 (DT)
[   24.702831] Call trace:
[   24.705559]  dump_backtrace+0xac/0x130
[   24.709755]  show_stack+0x30/0x48
[   24.713456]  dump_stack_lvl+0x60/0xb0
[   24.717552]  dump_stack+0x18/0x28
[   24.721254]  register_lock_class+0x4e8/0x4f8
[   24.726029]  __lock_acquire+0x88/0x2130
[   24.730314]  lock_acquire+0x17c/0x338
[   24.734403]  _raw_spin_lock_irqsave+0x60/0x90
[   24.739274]  u_audio_get_capture_srate+0x34/0x68
[   24.744436]  afunc_setup+0x2d8/0x538
[   24.748431]  composite_setup+0x1a8/0x1ba8
[   24.752913]  configfs_composite_setup+0x88/0xc0
[   24.757974]  dwc3_ep0_interrupt+0x5e8/0xab8
[   24.762648]  dwc3_process_event_buf+0x424/0xbb0
[   24.767717]  dwc3_thread_interrupt+0x4c/0x90
[   24.772488]  irq_thread_fn+0x34/0xb8
[   24.776484]  irq_thread+0x1a0/0x290
[   24.780379]  kthread+0x10c/0x120
[   24.783985]  ret_from_fork+0x10/0x20

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 drivers/usb/gadget/function/u_audio.c | 3 +++
 1 file changed, 3 insertions(+)

Comments

Greg Kroah-Hartman Oct. 2, 2023, 7:03 a.m. UTC | #1
On Mon, Oct 02, 2023 at 08:42:31AM +0200, Michael Grzeschik wrote:
> When using uac2 with lockdep enabled, the kernel is throwing this
> message, due to uninitialized spinlocks. We initialize them now.
> 
> [   24.668867] The code is fine but needs lockdep annotation, or maybe
> [   24.675878] you didn't initialize this object before use?
> [   24.681910] turning off the locking correctness validator.
> [   24.688038] CPU: 0 PID: 348 Comm: irq/43-dwc3 Tainted: G         C         6.5.0-20230919-1+ #14
> [   24.697866] Hardware name: WolfVision PF5 (DT)
> [   24.702831] Call trace:
> [   24.705559]  dump_backtrace+0xac/0x130
> [   24.709755]  show_stack+0x30/0x48
> [   24.713456]  dump_stack_lvl+0x60/0xb0
> [   24.717552]  dump_stack+0x18/0x28
> [   24.721254]  register_lock_class+0x4e8/0x4f8
> [   24.726029]  __lock_acquire+0x88/0x2130
> [   24.730314]  lock_acquire+0x17c/0x338
> [   24.734403]  _raw_spin_lock_irqsave+0x60/0x90
> [   24.739274]  u_audio_get_capture_srate+0x34/0x68
> [   24.744436]  afunc_setup+0x2d8/0x538
> [   24.748431]  composite_setup+0x1a8/0x1ba8
> [   24.752913]  configfs_composite_setup+0x88/0xc0
> [   24.757974]  dwc3_ep0_interrupt+0x5e8/0xab8
> [   24.762648]  dwc3_process_event_buf+0x424/0xbb0
> [   24.767717]  dwc3_thread_interrupt+0x4c/0x90
> [   24.772488]  irq_thread_fn+0x34/0xb8
> [   24.776484]  irq_thread+0x1a0/0x290
> [   24.780379]  kthread+0x10c/0x120
> [   24.783985]  ret_from_fork+0x10/0x20
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>

What commit id does this fix?

thanks,

greg k-h
Ruslan Bilovol Oct. 2, 2023, 8:39 a.m. UTC | #2
On Mon, Oct 2, 2023 at 2:42 AM Michael Grzeschik
<m.grzeschik@pengutronix.de> wrote:
>
> When using uac2 with lockdep enabled, the kernel is throwing this
> message, due to uninitialized spinlocks. We initialize them now.
>
> [   24.668867] The code is fine but needs lockdep annotation, or maybe
> [   24.675878] you didn't initialize this object before use?
> [   24.681910] turning off the locking correctness validator.
> [   24.688038] CPU: 0 PID: 348 Comm: irq/43-dwc3 Tainted: G         C         6.5.0-20230919-1+ #14
> [   24.697866] Hardware name: WolfVision PF5 (DT)
> [   24.702831] Call trace:
> [   24.705559]  dump_backtrace+0xac/0x130
> [   24.709755]  show_stack+0x30/0x48
> [   24.713456]  dump_stack_lvl+0x60/0xb0
> [   24.717552]  dump_stack+0x18/0x28
> [   24.721254]  register_lock_class+0x4e8/0x4f8
> [   24.726029]  __lock_acquire+0x88/0x2130
> [   24.730314]  lock_acquire+0x17c/0x338
> [   24.734403]  _raw_spin_lock_irqsave+0x60/0x90
> [   24.739274]  u_audio_get_capture_srate+0x34/0x68
> [   24.744436]  afunc_setup+0x2d8/0x538
> [   24.748431]  composite_setup+0x1a8/0x1ba8
> [   24.752913]  configfs_composite_setup+0x88/0xc0
> [   24.757974]  dwc3_ep0_interrupt+0x5e8/0xab8
> [   24.762648]  dwc3_process_event_buf+0x424/0xbb0
> [   24.767717]  dwc3_thread_interrupt+0x4c/0x90
> [   24.772488]  irq_thread_fn+0x34/0xb8
> [   24.776484]  irq_thread+0x1a0/0x290
> [   24.780379]  kthread+0x10c/0x120
> [   24.783985]  ret_from_fork+0x10/0x20
>
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> ---
>  drivers/usb/gadget/function/u_audio.c | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
> index 4a42574b4a7feb..9d9f906adf7c00 100644
> --- a/drivers/usb/gadget/function/u_audio.c
> +++ b/drivers/usb/gadget/function/u_audio.c
> @@ -1172,6 +1172,9 @@ int g_audio_setup(struct g_audio *g_audio, const char *pcm_name,
>         g_audio->uac = uac;
>         uac->audio_dev = g_audio;
>
> +       spin_lock_init(&uac->c_prm.lock);
> +       spin_lock_init(&uac->p_prm.lock);

These locks are already initialized just a few lines below in this function.

It seems the issue is because uac2 does u_audio_get_capture_srate() while
capture isn't enabled? What is your UAC2 gadget configuration?

Thanks,
Ruslan

> +
>         params = &g_audio->params;
>         p_chmask = params->p_chmask;
>         c_chmask = params->c_chmask;
> --
> 2.39.2
>
Michael Grzeschik Oct. 3, 2023, 11:12 a.m. UTC | #3
On Mon, Oct 02, 2023 at 04:39:42AM -0400, Ruslan Bilovol wrote:
>On Mon, Oct 2, 2023 at 2:42 AM Michael Grzeschik
><m.grzeschik@pengutronix.de> wrote:
>>
>> When using uac2 with lockdep enabled, the kernel is throwing this
>> message, due to uninitialized spinlocks. We initialize them now.
>>
>> [   24.668867] The code is fine but needs lockdep annotation, or maybe
>> [   24.675878] you didn't initialize this object before use?
>> [   24.681910] turning off the locking correctness validator.
>> [   24.688038] CPU: 0 PID: 348 Comm: irq/43-dwc3 Tainted: G         C         6.5.0-20230919-1+ #14
>> [   24.697866] Hardware name: WolfVision PF5 (DT)
>> [   24.702831] Call trace:
>> [   24.705559]  dump_backtrace+0xac/0x130
>> [   24.709755]  show_stack+0x30/0x48
>> [   24.713456]  dump_stack_lvl+0x60/0xb0
>> [   24.717552]  dump_stack+0x18/0x28
>> [   24.721254]  register_lock_class+0x4e8/0x4f8
>> [   24.726029]  __lock_acquire+0x88/0x2130
>> [   24.730314]  lock_acquire+0x17c/0x338
>> [   24.734403]  _raw_spin_lock_irqsave+0x60/0x90
>> [   24.739274]  u_audio_get_capture_srate+0x34/0x68
>> [   24.744436]  afunc_setup+0x2d8/0x538
>> [   24.748431]  composite_setup+0x1a8/0x1ba8
>> [   24.752913]  configfs_composite_setup+0x88/0xc0
>> [   24.757974]  dwc3_ep0_interrupt+0x5e8/0xab8
>> [   24.762648]  dwc3_process_event_buf+0x424/0xbb0
>> [   24.767717]  dwc3_thread_interrupt+0x4c/0x90
>> [   24.772488]  irq_thread_fn+0x34/0xb8
>> [   24.776484]  irq_thread+0x1a0/0x290
>> [   24.780379]  kthread+0x10c/0x120
>> [   24.783985]  ret_from_fork+0x10/0x20
>>
>> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
>> ---
>>  drivers/usb/gadget/function/u_audio.c | 3 +++
>>  1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
>> index 4a42574b4a7feb..9d9f906adf7c00 100644
>> --- a/drivers/usb/gadget/function/u_audio.c
>> +++ b/drivers/usb/gadget/function/u_audio.c
>> @@ -1172,6 +1172,9 @@ int g_audio_setup(struct g_audio *g_audio, const char *pcm_name,
>>         g_audio->uac = uac;
>>         uac->audio_dev = g_audio;
>>
>> +       spin_lock_init(&uac->c_prm.lock);
>> +       spin_lock_init(&uac->p_prm.lock);
>
>These locks are already initialized just a few lines below in this function.

It was probably to obvious, so I missed them.

>It seems the issue is because uac2 does u_audio_get_capture_srate() while
>capture isn't enabled? What is your UAC2 gadget configuration?

Yes, so probably the c_chmask is not setup while we still try to
work/configure the capture path.

There is actually no application of ours involved in setting the srate.

It might be possible that pipewire is changing things that should
left alone. I will check that assumption.

Thanks,
Michael
diff mbox series

Patch

diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
index 4a42574b4a7feb..9d9f906adf7c00 100644
--- a/drivers/usb/gadget/function/u_audio.c
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -1172,6 +1172,9 @@  int g_audio_setup(struct g_audio *g_audio, const char *pcm_name,
 	g_audio->uac = uac;
 	uac->audio_dev = g_audio;
 
+	spin_lock_init(&uac->c_prm.lock);
+	spin_lock_init(&uac->p_prm.lock);
+
 	params = &g_audio->params;
 	p_chmask = params->p_chmask;
 	c_chmask = params->c_chmask;