| Message ID | 20231227060316.8539-1-chunfeng.yun@mediatek.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v4,1/3] dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue | expand |
On 12/27/23 9:03 AM, Chunfeng Yun wrote: > For Gen1 isoc-in endpoint on controller before about SSUSB IPM v1.6.0, it > still send out unexpected ACK after receiving a short packet in burst > transfer, this will cause an exception on connected device, specially for > a 4k camera. > Add a quirk property "rx-fifo-depth" to work around this hardware issue, > prefer to use 3k bytes; > The side-effect is that may cause performance drop about 10%, including That it may cause? > bulk transfer. > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > --- > v4: change rx-fifo size in bytes > v3: add fifo depth unit, change the value range from 0-3 to 1-4 > v2: change 'mediatek,rxfifo-depth' to 'rx-fifo-depth' > --- > .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > index e9644e333d78..9f621f2209df 100644 > --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > @@ -124,6 +124,17 @@ properties: > defined in the xHCI spec on MTK's controller. > default: 5000 > > + rx-fifo-depth: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + It is a quirk used to work around Gen1 isoc-in endpoint transfer issue > + that still send out unexpected ACK after device finish the burst transfer Finishes. > + with a short packet and cause an exception, specially on a 4K camera > + device, it happens on controller before about IPM v1.6.0; the side-effect > + is that may cause performance drop about 10%, include bulk transfer, That it may cause? And including? [...] MBR, Sergey
Hi On 27.12.2023 8.03, Chunfeng Yun wrote: > For Gen1 isoc-in endpoint on controller before about SSUSB IPM v1.6.0, it > still send out unexpected ACK after receiving a short packet in burst > transfer, this will cause an exception on connected device, specially for > a 4k camera. > Add a quirk property "rx-fifo-depth" to work around this hardware issue, > prefer to use 3k bytes; > The side-effect is that may cause performance drop about 10%, including > bulk transfer. Is it be possible to detect those Mediatek xHC versions that need this workaround in the xhci-mtk driver directly? This way we could avoid passing a new "rx-fifo-depth" property to it. Thanks Mathias
Il 27/12/23 07:03, Chunfeng Yun ha scritto: > For Gen1 isoc-in endpoint on controller before about SSUSB IPM v1.6.0, it > still send out unexpected ACK after receiving a short packet in burst > transfer, this will cause an exception on connected device, specially for > a 4k camera. > Add a quirk property "rx-fifo-depth" to work around this hardware issue, > prefer to use 3k bytes; > The side-effect is that may cause performance drop about 10%, including > bulk transfer. > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
On 27/12/2023 07:03, Chunfeng Yun wrote: > For Gen1 isoc-in endpoint on controller before about SSUSB IPM v1.6.0, it > still send out unexpected ACK after receiving a short packet in burst > transfer, this will cause an exception on connected device, specially for > a 4k camera. > Add a quirk property "rx-fifo-depth" to work around this hardware issue, > prefer to use 3k bytes; > The side-effect is that may cause performance drop about 10%, including > bulk transfer. > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > --- > v4: change rx-fifo size in bytes Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Thu, 2023-12-28 at 12:44 +0200, Mathias Nyman wrote: > > External email : Please do not click links or open attachments until > you have verified the sender or the content. > Hi > > On 27.12.2023 8.03, Chunfeng Yun wrote: > > For Gen1 isoc-in endpoint on controller before about SSUSB IPM > v1.6.0, it > > still send out unexpected ACK after receiving a short packet in > burst > > transfer, this will cause an exception on connected device, > specially for > > a 4k camera. > > Add a quirk property "rx-fifo-depth" to work around this hardware > issue, > > prefer to use 3k bytes; > > The side-effect is that may cause performance drop about 10%, > including > > bulk transfer. > > Is it be possible to detect those Mediatek xHC versions that need > this > workaround in the xhci-mtk driver directly? the version info is saved in IPPC register, when support dual-role mode, xhci-mtk driver can't access these register which are controlled by dual-role controller mtu3 driver; another reason is that some cases, e.g. connected a on-board fixed mass storage device, do not use 4K camera, it's better to use the default rx-fifo-depth; Thanks > > This way we could avoid passing a new "rx-fifo-depth" property to it. > > Thanks > Mathias > >
On Wed, 2023-12-27 at 12:19 +0300, Sergey Shtylyov wrote: > > External email : Please do not click links or open attachments until > you have verified the sender or the content. > On 12/27/23 9:03 AM, Chunfeng Yun wrote: > > > For Gen1 isoc-in endpoint on controller before about SSUSB IPM > v1.6.0, it > > still send out unexpected ACK after receiving a short packet in > burst > > transfer, this will cause an exception on connected device, > specially for > > a 4k camera. > > Add a quirk property "rx-fifo-depth" to work around this hardware > issue, > > prefer to use 3k bytes; > > The side-effect is that may cause performance drop about 10%, > including > > That it may cause? > > > bulk transfer. > > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > > --- > > v4: change rx-fifo size in bytes > > v3: add fifo depth unit, change the value range from 0-3 to 1-4 > > v2: change 'mediatek,rxfifo-depth' to 'rx-fifo-depth' > > --- > > .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 11 > +++++++++++ > > 1 file changed, 11 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk- > xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk- > xhci.yaml > > index e9644e333d78..9f621f2209df 100644 > > --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > > +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > > @@ -124,6 +124,17 @@ properties: > > defined in the xHCI spec on MTK's controller. > > default: 5000 > > > > + rx-fifo-depth: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + It is a quirk used to work around Gen1 isoc-in endpoint > transfer issue > > + that still send out unexpected ACK after device finish the > burst transfer > > Finishes. > > > + with a short packet and cause an exception, specially on a > 4K camera > > + device, it happens on controller before about IPM v1.6.0; > the side-effect > > + is that may cause performance drop about 10%, include bulk > transfer, > > That it may cause? And including? Ok, I'll fix these typos, Reply again, previous one contains HTML part; Thanks > > [...] > > MBR, Sergey
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml index e9644e333d78..9f621f2209df 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml @@ -124,6 +124,17 @@ properties: defined in the xHCI spec on MTK's controller. default: 5000 + rx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + It is a quirk used to work around Gen1 isoc-in endpoint transfer issue + that still send out unexpected ACK after device finish the burst transfer + with a short packet and cause an exception, specially on a 4K camera + device, it happens on controller before about IPM v1.6.0; the side-effect + is that may cause performance drop about 10%, include bulk transfer, + prefer to use 3k here. The size is in bytes. + enum: [1024, 2048, 3072, 4096] + # the following properties are only used for case 1 wakeup-source: description: enable USB remote wakeup, see power/wakeup-source.txt
For Gen1 isoc-in endpoint on controller before about SSUSB IPM v1.6.0, it still send out unexpected ACK after receiving a short packet in burst transfer, this will cause an exception on connected device, specially for a 4k camera. Add a quirk property "rx-fifo-depth" to work around this hardware issue, prefer to use 3k bytes; The side-effect is that may cause performance drop about 10%, including bulk transfer. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- v4: change rx-fifo size in bytes v3: add fifo depth unit, change the value range from 0-3 to 1-4 v2: change 'mediatek,rxfifo-depth' to 'rx-fifo-depth' --- .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+)