Message ID | 20241107112955.v3.6.Ic61ced3cdfb5d6776435356061f12307da719829@changeid (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Thunderbolt and DP altmode support for cros-ec-typec | expand |
On Thu, Nov 07, 2024 at 11:29:59AM -0800, Abhishek Pandit-Subedi wrote: > Add support for entering and exiting Thunderbolt alt-mode using AP > driven alt-mode. > > Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> > --- > > Changes in v3: > - Fix usage of TBT sid and mode. > - Removed unused vdm operations during altmode registration > > Changes in v2: > - Refactored thunderbolt support into cros_typec_altmode.c > > drivers/platform/chrome/Makefile | 3 + > drivers/platform/chrome/cros_ec_typec.c | 23 +++--- > drivers/platform/chrome/cros_typec_altmode.c | 85 ++++++++++++++++++++ > drivers/platform/chrome/cros_typec_altmode.h | 14 ++++ > 4 files changed, 114 insertions(+), 11 deletions(-) > > diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile > index 2f90d4db8099..b9b1281de063 100644 > --- a/drivers/platform/chrome/Makefile > +++ b/drivers/platform/chrome/Makefile > @@ -21,6 +21,9 @@ cros-ec-typec-objs := cros_ec_typec.o cros_typec_vdm.o > ifneq ($(CONFIG_TYPEC_DP_ALTMODE),) > cros-ec-typec-objs += cros_typec_altmode.o > endif > +ifneq ($(CONFIG_TYPEC_TBT_ALTMODE),) > + cros-ec-typec-objs += cros_typec_altmode.o > +endif Doesn't this also result in the object file being included twice and thus in a duplicate symbols declaration? > obj-$(CONFIG_CROS_EC_TYPEC) += cros-ec-typec.o > > obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o > diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c > index 3a6f5f2717b9..558b618df63c 100644 > --- a/drivers/platform/chrome/cros_ec_typec.c > +++ b/drivers/platform/chrome/cros_ec_typec.c > @@ -302,18 +302,19 @@ static int cros_typec_register_port_altmodes(struct cros_typec_data *typec, > > /* > * Register TBT compatibility alt mode. The EC will not enter the mode > - * if it doesn't support it, so it's safe to register it unconditionally > - * here for now. > + * if it doesn't support it and it will not enter automatically by > + * design so we can use the |ap_driven_altmode| feature to check if we > + * should register it. > */ > - memset(&desc, 0, sizeof(desc)); > - desc.svid = USB_TYPEC_TBT_SID; > - desc.mode = TYPEC_ANY_MODE; > - amode = typec_port_register_altmode(port->port, &desc); > - if (IS_ERR(amode)) > - return PTR_ERR(amode); > - port->port_altmode[CROS_EC_ALTMODE_TBT] = amode; > - typec_altmode_set_drvdata(amode, port); > - amode->ops = &port_amode_ops; > + if (typec->ap_driven_altmode) { > + memset(&desc, 0, sizeof(desc)); > + desc.svid = USB_TYPEC_TBT_SID; > + desc.mode = TBT_MODE; > + amode = cros_typec_register_thunderbolt(port, &desc); > + if (IS_ERR(amode)) > + return PTR_ERR(amode); > + port->port_altmode[CROS_EC_ALTMODE_TBT] = amode; > + } > > port->state.alt = NULL; > port->state.mode = TYPEC_STATE_USB; > diff --git a/drivers/platform/chrome/cros_typec_altmode.c b/drivers/platform/chrome/cros_typec_altmode.c > index 3598b8a6ceee..9cf2cef6c277 100644 > --- a/drivers/platform/chrome/cros_typec_altmode.c > +++ b/drivers/platform/chrome/cros_typec_altmode.c > @@ -8,6 +8,7 @@ > #include "cros_ec_typec.h" > > #include <linux/usb/typec_dp.h> > +#include <linux/usb/typec_tbt.h> > #include <linux/usb/pd_vdo.h> > > #include "cros_typec_altmode.h" > @@ -67,6 +68,8 @@ static int cros_typec_altmode_enter(struct typec_altmode *alt, u32 *vdo) > > if (data->sid == USB_TYPEC_DP_SID) > req.mode_to_enter = CROS_EC_ALTMODE_DP; > + else if (data->sid == USB_TYPEC_TBT_SID) > + req.mode_to_enter = CROS_EC_ALTMODE_TBT; > else > return -EOPNOTSUPP; > > @@ -196,6 +199,53 @@ static int cros_typec_displayport_vdm(struct typec_altmode *alt, u32 header, > return 0; > } > > +static int cros_typec_thunderbolt_vdm(struct typec_altmode *alt, u32 header, > + const u32 *data, int count) > +{ > + struct cros_typec_altmode_data *adata = typec_altmode_get_drvdata(alt); > + > + int cmd_type = PD_VDO_CMDT(header); > + int cmd = PD_VDO_CMD(header); > + int svdm_version; I suppose that with the current approach this misses the ap_mode_entry check. If it gets moved to cros_typec_altmode_vdm(), then it should be okay. > + > + svdm_version = typec_altmode_get_svdm_version(alt); > + if (svdm_version < 0) > + return svdm_version; > + > + switch (cmd_type) { > + case CMDT_INIT: > + if (PD_VDO_SVDM_VER(header) < svdm_version) { > + typec_partner_set_svdm_version(adata->port->partner, > + PD_VDO_SVDM_VER(header)); > + svdm_version = PD_VDO_SVDM_VER(header); > + } > + > + adata->header = VDO(adata->sid, 1, svdm_version, cmd); > + adata->header |= VDO_OPOS(adata->mode); > + > + switch (cmd) { > + case CMD_ENTER_MODE: > + /* Don't respond to the enter mode vdm because it > + * triggers mux configuration. This is handled directly > + * by the cros_ec_typec driver so the Thunderbolt driver > + * doesn't need to be involved. > + */ > + break; > + default: > + adata->header |= VDO_CMDT(CMDT_RSP_ACK); > + schedule_work(&adata->work); > + break; > + } > + > + break; > + default: > + break; > + } > + > + return 0; > +} > + > + > static int cros_typec_altmode_vdm(struct typec_altmode *alt, u32 header, > const u32 *data, int count) > { > @@ -204,6 +254,9 @@ static int cros_typec_altmode_vdm(struct typec_altmode *alt, u32 header, > if (adata->sid == USB_TYPEC_DP_SID) > return cros_typec_displayport_vdm(alt, header, data, count); > > + if (adata->sid == USB_TYPEC_TBT_SID) > + return cros_typec_thunderbolt_vdm(alt, header, data, count); > + > return -EINVAL; > } > > @@ -273,3 +326,35 @@ cros_typec_register_displayport(struct cros_typec_port *port, > return alt; > } > #endif > + > +#if IS_ENABLED(CONFIG_TYPEC_TBT_ALTMODE) > +struct typec_altmode * > +cros_typec_register_thunderbolt(struct cros_typec_port *port, > + struct typec_altmode_desc *desc) > +{ > + struct typec_altmode *alt; > + struct cros_typec_altmode_data *data; > + > + alt = typec_port_register_altmode(port->port, desc); > + if (IS_ERR(alt)) > + return alt; > + > + data = devm_kzalloc(&alt->dev, sizeof(*data), GFP_KERNEL); > + if (!data) { > + typec_unregister_altmode(alt); > + return ERR_PTR(-ENOMEM); > + } > + > + INIT_WORK(&data->work, cros_typec_altmode_work); > + data->alt = alt; > + data->port = port; > + data->ap_mode_entry = true; > + data->sid = desc->svid; > + data->mode = desc->mode; > + > + typec_altmode_set_ops(alt, &cros_typec_altmode_ops); > + typec_altmode_set_drvdata(alt, data); > + > + return alt; > +} > +#endif > diff --git a/drivers/platform/chrome/cros_typec_altmode.h b/drivers/platform/chrome/cros_typec_altmode.h > index c6f8fb02c99c..810b553ddcd8 100644 > --- a/drivers/platform/chrome/cros_typec_altmode.h > +++ b/drivers/platform/chrome/cros_typec_altmode.h > @@ -31,4 +31,18 @@ static inline int cros_typec_displayport_status_update(struct typec_altmode *alt > return 0; > } > #endif > + > +#if IS_ENABLED(CONFIG_TYPEC_TBT_ALTMODE) > +struct typec_altmode * > +cros_typec_register_thunderbolt(struct cros_typec_port *port, > + struct typec_altmode_desc *desc); > +#else > +static inline struct typec_altmode * > +cros_typec_register_thunderbolt(struct cros_typec_port *port, > + struct typec_altmode_desc *desc) > +{ > + return typec_port_register_altmode(port->port, desc); > +} > +#endif > + > #endif /* __CROS_TYPEC_ALTMODE_H__ */ > -- > 2.47.0.277.g8800431eea-goog >
On Fri, Nov 8, 2024 at 10:41 PM Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > > On Thu, Nov 07, 2024 at 11:29:59AM -0800, Abhishek Pandit-Subedi wrote: > > Add support for entering and exiting Thunderbolt alt-mode using AP > > driven alt-mode. > > > > Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> > > --- > > > > Changes in v3: > > - Fix usage of TBT sid and mode. > > - Removed unused vdm operations during altmode registration > > > > Changes in v2: > > - Refactored thunderbolt support into cros_typec_altmode.c > > > > drivers/platform/chrome/Makefile | 3 + > > drivers/platform/chrome/cros_ec_typec.c | 23 +++--- > > drivers/platform/chrome/cros_typec_altmode.c | 85 ++++++++++++++++++++ > > drivers/platform/chrome/cros_typec_altmode.h | 14 ++++ > > 4 files changed, 114 insertions(+), 11 deletions(-) > > > > diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile > > index 2f90d4db8099..b9b1281de063 100644 > > --- a/drivers/platform/chrome/Makefile > > +++ b/drivers/platform/chrome/Makefile > > @@ -21,6 +21,9 @@ cros-ec-typec-objs := cros_ec_typec.o cros_typec_vdm.o > > ifneq ($(CONFIG_TYPEC_DP_ALTMODE),) > > cros-ec-typec-objs += cros_typec_altmode.o > > endif > > +ifneq ($(CONFIG_TYPEC_TBT_ALTMODE),) > > + cros-ec-typec-objs += cros_typec_altmode.o > > +endif > > Doesn't this also result in the object file being included twice and > thus in a duplicate symbols declaration? I was trying to figure out how to add this file if either of those config options existed in https://docs.kernel.org/kbuild/makefiles.html#built-in-object-goals-obj-y and it says, "Duplicates in the lists are allowed: the first instance will be linked into built-in.a and succeeding instances will be ignored." Is there a preferred way of doing the following in the Makefile: if (defined(CONFIG_TYPEC_TBT_ALTMODE) || defined(CONFIG_TYPEC_DP_ALTMODE)) {...} I briefly considered the following and dropped it because it is terrible readability-wise: ifneq ($(CONFIG_TYPEC_TBT_ALTMODE)$(CONFIG_TYPEC_DP_ALTMODE),) > > > obj-$(CONFIG_CROS_EC_TYPEC) += cros-ec-typec.o > > > > obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o > > diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c > > index 3a6f5f2717b9..558b618df63c 100644 > > --- a/drivers/platform/chrome/cros_ec_typec.c > > +++ b/drivers/platform/chrome/cros_ec_typec.c > > @@ -302,18 +302,19 @@ static int cros_typec_register_port_altmodes(struct cros_typec_data *typec, > > > > /* > > * Register TBT compatibility alt mode. The EC will not enter the mode > > - * if it doesn't support it, so it's safe to register it unconditionally > > - * here for now. > > + * if it doesn't support it and it will not enter automatically by > > + * design so we can use the |ap_driven_altmode| feature to check if we > > + * should register it. > > */ > > - memset(&desc, 0, sizeof(desc)); > > - desc.svid = USB_TYPEC_TBT_SID; > > - desc.mode = TYPEC_ANY_MODE; > > - amode = typec_port_register_altmode(port->port, &desc); > > - if (IS_ERR(amode)) > > - return PTR_ERR(amode); > > - port->port_altmode[CROS_EC_ALTMODE_TBT] = amode; > > - typec_altmode_set_drvdata(amode, port); > > - amode->ops = &port_amode_ops; > > + if (typec->ap_driven_altmode) { > > + memset(&desc, 0, sizeof(desc)); > > + desc.svid = USB_TYPEC_TBT_SID; > > + desc.mode = TBT_MODE; > > + amode = cros_typec_register_thunderbolt(port, &desc); > > + if (IS_ERR(amode)) > > + return PTR_ERR(amode); > > + port->port_altmode[CROS_EC_ALTMODE_TBT] = amode; > > + } > > > > port->state.alt = NULL; > > port->state.mode = TYPEC_STATE_USB; > > diff --git a/drivers/platform/chrome/cros_typec_altmode.c b/drivers/platform/chrome/cros_typec_altmode.c > > index 3598b8a6ceee..9cf2cef6c277 100644 > > --- a/drivers/platform/chrome/cros_typec_altmode.c > > +++ b/drivers/platform/chrome/cros_typec_altmode.c > > @@ -8,6 +8,7 @@ > > #include "cros_ec_typec.h" > > > > #include <linux/usb/typec_dp.h> > > +#include <linux/usb/typec_tbt.h> > > #include <linux/usb/pd_vdo.h> > > > > #include "cros_typec_altmode.h" > > @@ -67,6 +68,8 @@ static int cros_typec_altmode_enter(struct typec_altmode *alt, u32 *vdo) > > > > if (data->sid == USB_TYPEC_DP_SID) > > req.mode_to_enter = CROS_EC_ALTMODE_DP; > > + else if (data->sid == USB_TYPEC_TBT_SID) > > + req.mode_to_enter = CROS_EC_ALTMODE_TBT; > > else > > return -EOPNOTSUPP; > > > > @@ -196,6 +199,53 @@ static int cros_typec_displayport_vdm(struct typec_altmode *alt, u32 header, > > return 0; > > } > > > > +static int cros_typec_thunderbolt_vdm(struct typec_altmode *alt, u32 header, > > + const u32 *data, int count) > > +{ > > + struct cros_typec_altmode_data *adata = typec_altmode_get_drvdata(alt); > > + > > + int cmd_type = PD_VDO_CMDT(header); > > + int cmd = PD_VDO_CMD(header); > > + int svdm_version; > > I suppose that with the current approach this misses the ap_mode_entry > check. If it gets moved to cros_typec_altmode_vdm(), then it should be > okay. We don't register the thunderbolt port driver if ap_mode_entry is false so it's an unnecessary check. > > > + > > + svdm_version = typec_altmode_get_svdm_version(alt); > > + if (svdm_version < 0) > > + return svdm_version; > > + > > + switch (cmd_type) { > > + case CMDT_INIT: > > + if (PD_VDO_SVDM_VER(header) < svdm_version) { > > + typec_partner_set_svdm_version(adata->port->partner, > > + PD_VDO_SVDM_VER(header)); > > + svdm_version = PD_VDO_SVDM_VER(header); > > + } > > + > > + adata->header = VDO(adata->sid, 1, svdm_version, cmd); > > + adata->header |= VDO_OPOS(adata->mode); > > + > > + switch (cmd) { > > + case CMD_ENTER_MODE: > > + /* Don't respond to the enter mode vdm because it > > + * triggers mux configuration. This is handled directly > > + * by the cros_ec_typec driver so the Thunderbolt driver > > + * doesn't need to be involved. > > + */ > > + break; > > + default: > > + adata->header |= VDO_CMDT(CMDT_RSP_ACK); > > + schedule_work(&adata->work); > > + break; > > + } > > + > > + break; > > + default: > > + break; > > + } > > + > > + return 0; > > +} > > + > > + > > static int cros_typec_altmode_vdm(struct typec_altmode *alt, u32 header, > > const u32 *data, int count) > > { > > @@ -204,6 +254,9 @@ static int cros_typec_altmode_vdm(struct typec_altmode *alt, u32 header, > > if (adata->sid == USB_TYPEC_DP_SID) > > return cros_typec_displayport_vdm(alt, header, data, count); > > > > + if (adata->sid == USB_TYPEC_TBT_SID) > > + return cros_typec_thunderbolt_vdm(alt, header, data, count); > > + > > return -EINVAL; > > } > > > > @@ -273,3 +326,35 @@ cros_typec_register_displayport(struct cros_typec_port *port, > > return alt; > > } > > #endif > > + > > +#if IS_ENABLED(CONFIG_TYPEC_TBT_ALTMODE) > > +struct typec_altmode * > > +cros_typec_register_thunderbolt(struct cros_typec_port *port, > > + struct typec_altmode_desc *desc) > > +{ > > + struct typec_altmode *alt; > > + struct cros_typec_altmode_data *data; > > + > > + alt = typec_port_register_altmode(port->port, desc); > > + if (IS_ERR(alt)) > > + return alt; > > + > > + data = devm_kzalloc(&alt->dev, sizeof(*data), GFP_KERNEL); > > + if (!data) { > > + typec_unregister_altmode(alt); > > + return ERR_PTR(-ENOMEM); > > + } > > + > > + INIT_WORK(&data->work, cros_typec_altmode_work); > > + data->alt = alt; > > + data->port = port; > > + data->ap_mode_entry = true; > > + data->sid = desc->svid; > > + data->mode = desc->mode; > > + > > + typec_altmode_set_ops(alt, &cros_typec_altmode_ops); > > + typec_altmode_set_drvdata(alt, data); > > + > > + return alt; > > +} > > +#endif > > diff --git a/drivers/platform/chrome/cros_typec_altmode.h b/drivers/platform/chrome/cros_typec_altmode.h > > index c6f8fb02c99c..810b553ddcd8 100644 > > --- a/drivers/platform/chrome/cros_typec_altmode.h > > +++ b/drivers/platform/chrome/cros_typec_altmode.h > > @@ -31,4 +31,18 @@ static inline int cros_typec_displayport_status_update(struct typec_altmode *alt > > return 0; > > } > > #endif > > + > > +#if IS_ENABLED(CONFIG_TYPEC_TBT_ALTMODE) > > +struct typec_altmode * > > +cros_typec_register_thunderbolt(struct cros_typec_port *port, > > + struct typec_altmode_desc *desc); > > +#else > > +static inline struct typec_altmode * > > +cros_typec_register_thunderbolt(struct cros_typec_port *port, > > + struct typec_altmode_desc *desc) > > +{ > > + return typec_port_register_altmode(port->port, desc); > > +} > > +#endif > > + > > #endif /* __CROS_TYPEC_ALTMODE_H__ */ > > -- > > 2.47.0.277.g8800431eea-goog > > > > -- > With best wishes > Dmitry
On Wed, Nov 13, 2024 at 08:01:57PM -0800, Abhishek Pandit-Subedi wrote: > On Fri, Nov 8, 2024 at 10:41 PM Dmitry Baryshkov > <dmitry.baryshkov@linaro.org> wrote: > > > > On Thu, Nov 07, 2024 at 11:29:59AM -0800, Abhishek Pandit-Subedi wrote: > > > Add support for entering and exiting Thunderbolt alt-mode using AP > > > driven alt-mode. > > > > > > Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> > > > --- > > > > > > Changes in v3: > > > - Fix usage of TBT sid and mode. > > > - Removed unused vdm operations during altmode registration > > > > > > Changes in v2: > > > - Refactored thunderbolt support into cros_typec_altmode.c > > > > > > drivers/platform/chrome/Makefile | 3 + > > > drivers/platform/chrome/cros_ec_typec.c | 23 +++--- > > > drivers/platform/chrome/cros_typec_altmode.c | 85 ++++++++++++++++++++ > > > drivers/platform/chrome/cros_typec_altmode.h | 14 ++++ > > > 4 files changed, 114 insertions(+), 11 deletions(-) > > > > > > diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile > > > index 2f90d4db8099..b9b1281de063 100644 > > > --- a/drivers/platform/chrome/Makefile > > > +++ b/drivers/platform/chrome/Makefile > > > @@ -21,6 +21,9 @@ cros-ec-typec-objs := cros_ec_typec.o cros_typec_vdm.o > > > ifneq ($(CONFIG_TYPEC_DP_ALTMODE),) > > > cros-ec-typec-objs += cros_typec_altmode.o > > > endif > > > +ifneq ($(CONFIG_TYPEC_TBT_ALTMODE),) > > > + cros-ec-typec-objs += cros_typec_altmode.o > > > +endif > > > > Doesn't this also result in the object file being included twice and > > thus in a duplicate symbols declaration? > > I was trying to figure out how to add this file if either of those > config options existed in > https://docs.kernel.org/kbuild/makefiles.html#built-in-object-goals-obj-y > and it says, "Duplicates in the lists are allowed: the first instance > will be linked into built-in.a and succeeding instances will be > ignored." > > Is there a preferred way of doing the following in the Makefile: > if (defined(CONFIG_TYPEC_TBT_ALTMODE) || > defined(CONFIG_TYPEC_DP_ALTMODE)) {...} > > I briefly considered the following and dropped it because it is > terrible readability-wise: > ifneq ($(CONFIG_TYPEC_TBT_ALTMODE)$(CONFIG_TYPEC_DP_ALTMODE),) The usual way would to define new Kconfig symbol: config CROS_EC_TYPEC_ALTMODES bool # Note, no description here, don't show in menuconfig help Selectable symbol to enable altmodes config CROS_EC_TYPEC ... select CROS_EC_TYPEC_ALTMODES if CONFIG_TYPEC_DP_ALTMODE select CROS_EC_TYPEC_ALTMODES if CONFIG_TYPEC_TBT_ALTMODE ... ---- cros-ec-typec-$(CONFIG_CROS_EC_TYPEC_ALTMODES) += cros_typec_altmode.o > > > > > > obj-$(CONFIG_CROS_EC_TYPEC) += cros-ec-typec.o > > > > > > obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o > > > diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c > > > index 3a6f5f2717b9..558b618df63c 100644 > > > --- a/drivers/platform/chrome/cros_ec_typec.c > > > +++ b/drivers/platform/chrome/cros_ec_typec.c > > > @@ -302,18 +302,19 @@ static int cros_typec_register_port_altmodes(struct cros_typec_data *typec, > > > > > > /* > > > * Register TBT compatibility alt mode. The EC will not enter the mode > > > - * if it doesn't support it, so it's safe to register it unconditionally > > > - * here for now. > > > + * if it doesn't support it and it will not enter automatically by > > > + * design so we can use the |ap_driven_altmode| feature to check if we > > > + * should register it. > > > */ > > > - memset(&desc, 0, sizeof(desc)); > > > - desc.svid = USB_TYPEC_TBT_SID; > > > - desc.mode = TYPEC_ANY_MODE; > > > - amode = typec_port_register_altmode(port->port, &desc); > > > - if (IS_ERR(amode)) > > > - return PTR_ERR(amode); > > > - port->port_altmode[CROS_EC_ALTMODE_TBT] = amode; > > > - typec_altmode_set_drvdata(amode, port); > > > - amode->ops = &port_amode_ops; > > > + if (typec->ap_driven_altmode) { > > > + memset(&desc, 0, sizeof(desc)); > > > + desc.svid = USB_TYPEC_TBT_SID; > > > + desc.mode = TBT_MODE; > > > + amode = cros_typec_register_thunderbolt(port, &desc); > > > + if (IS_ERR(amode)) > > > + return PTR_ERR(amode); > > > + port->port_altmode[CROS_EC_ALTMODE_TBT] = amode; > > > + } > > > > > > port->state.alt = NULL; > > > port->state.mode = TYPEC_STATE_USB; > > > diff --git a/drivers/platform/chrome/cros_typec_altmode.c b/drivers/platform/chrome/cros_typec_altmode.c > > > index 3598b8a6ceee..9cf2cef6c277 100644 > > > --- a/drivers/platform/chrome/cros_typec_altmode.c > > > +++ b/drivers/platform/chrome/cros_typec_altmode.c > > > @@ -8,6 +8,7 @@ > > > #include "cros_ec_typec.h" > > > > > > #include <linux/usb/typec_dp.h> > > > +#include <linux/usb/typec_tbt.h> > > > #include <linux/usb/pd_vdo.h> > > > > > > #include "cros_typec_altmode.h" > > > @@ -67,6 +68,8 @@ static int cros_typec_altmode_enter(struct typec_altmode *alt, u32 *vdo) > > > > > > if (data->sid == USB_TYPEC_DP_SID) > > > req.mode_to_enter = CROS_EC_ALTMODE_DP; > > > + else if (data->sid == USB_TYPEC_TBT_SID) > > > + req.mode_to_enter = CROS_EC_ALTMODE_TBT; > > > else > > > return -EOPNOTSUPP; > > > > > > @@ -196,6 +199,53 @@ static int cros_typec_displayport_vdm(struct typec_altmode *alt, u32 header, > > > return 0; > > > } > > > > > > +static int cros_typec_thunderbolt_vdm(struct typec_altmode *alt, u32 header, > > > + const u32 *data, int count) > > > +{ > > > + struct cros_typec_altmode_data *adata = typec_altmode_get_drvdata(alt); > > > + > > > + int cmd_type = PD_VDO_CMDT(header); > > > + int cmd = PD_VDO_CMD(header); > > > + int svdm_version; > > > > I suppose that with the current approach this misses the ap_mode_entry > > check. If it gets moved to cros_typec_altmode_vdm(), then it should be > > okay. > > We don't register the thunderbolt port driver if ap_mode_entry is > false so it's an unnecessary check. Why don't you register it? It would allow userspace to understand, what is happening, e.g. that the Type-C has switched to the TBT mode. > > > > > > + > > > + svdm_version = typec_altmode_get_svdm_version(alt); > > > + if (svdm_version < 0) > > > + return svdm_version; > > > + > > > + switch (cmd_type) { > > > + case CMDT_INIT: > > > + if (PD_VDO_SVDM_VER(header) < svdm_version) { > > > + typec_partner_set_svdm_version(adata->port->partner, > > > + PD_VDO_SVDM_VER(header)); > > > + svdm_version = PD_VDO_SVDM_VER(header); > > > + } > > > + > > > + adata->header = VDO(adata->sid, 1, svdm_version, cmd); > > > + adata->header |= VDO_OPOS(adata->mode); > > > + > > > + switch (cmd) { > > > + case CMD_ENTER_MODE: > > > + /* Don't respond to the enter mode vdm because it > > > + * triggers mux configuration. This is handled directly > > > + * by the cros_ec_typec driver so the Thunderbolt driver > > > + * doesn't need to be involved. > > > + */ > > > + break; > > > + default: > > > + adata->header |= VDO_CMDT(CMDT_RSP_ACK); > > > + schedule_work(&adata->work); > > > + break; > > > + } > > > + > > > + break; > > > + default: > > > + break; > > > + } > > > + > > > + return 0; > > > +} > > > + > > > + > > > static int cros_typec_altmode_vdm(struct typec_altmode *alt, u32 header, > > > const u32 *data, int count) > > > { > > > @@ -204,6 +254,9 @@ static int cros_typec_altmode_vdm(struct typec_altmode *alt, u32 header, > > > if (adata->sid == USB_TYPEC_DP_SID) > > > return cros_typec_displayport_vdm(alt, header, data, count); > > > > > > + if (adata->sid == USB_TYPEC_TBT_SID) > > > + return cros_typec_thunderbolt_vdm(alt, header, data, count); > > > + > > > return -EINVAL; > > > } > > > > > > @@ -273,3 +326,35 @@ cros_typec_register_displayport(struct cros_typec_port *port, > > > return alt; > > > } > > > #endif > > > + > > > +#if IS_ENABLED(CONFIG_TYPEC_TBT_ALTMODE) > > > +struct typec_altmode * > > > +cros_typec_register_thunderbolt(struct cros_typec_port *port, > > > + struct typec_altmode_desc *desc) > > > +{ > > > + struct typec_altmode *alt; > > > + struct cros_typec_altmode_data *data; > > > + > > > + alt = typec_port_register_altmode(port->port, desc); > > > + if (IS_ERR(alt)) > > > + return alt; > > > + > > > + data = devm_kzalloc(&alt->dev, sizeof(*data), GFP_KERNEL); > > > + if (!data) { > > > + typec_unregister_altmode(alt); > > > + return ERR_PTR(-ENOMEM); > > > + } > > > + > > > + INIT_WORK(&data->work, cros_typec_altmode_work); > > > + data->alt = alt; > > > + data->port = port; > > > + data->ap_mode_entry = true; > > > + data->sid = desc->svid; > > > + data->mode = desc->mode; > > > + > > > + typec_altmode_set_ops(alt, &cros_typec_altmode_ops); > > > + typec_altmode_set_drvdata(alt, data); > > > + > > > + return alt; > > > +} > > > +#endif > > > diff --git a/drivers/platform/chrome/cros_typec_altmode.h b/drivers/platform/chrome/cros_typec_altmode.h > > > index c6f8fb02c99c..810b553ddcd8 100644 > > > --- a/drivers/platform/chrome/cros_typec_altmode.h > > > +++ b/drivers/platform/chrome/cros_typec_altmode.h > > > @@ -31,4 +31,18 @@ static inline int cros_typec_displayport_status_update(struct typec_altmode *alt > > > return 0; > > > } > > > #endif > > > + > > > +#if IS_ENABLED(CONFIG_TYPEC_TBT_ALTMODE) > > > +struct typec_altmode * > > > +cros_typec_register_thunderbolt(struct cros_typec_port *port, > > > + struct typec_altmode_desc *desc); > > > +#else > > > +static inline struct typec_altmode * > > > +cros_typec_register_thunderbolt(struct cros_typec_port *port, > > > + struct typec_altmode_desc *desc) > > > +{ > > > + return typec_port_register_altmode(port->port, desc); > > > +} > > > +#endif > > > + > > > #endif /* __CROS_TYPEC_ALTMODE_H__ */ > > > -- > > > 2.47.0.277.g8800431eea-goog > > > > > > > -- > > With best wishes > > Dmitry
On Thu, Nov 14, 2024 at 2:55 AM Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > > On Wed, Nov 13, 2024 at 08:01:57PM -0800, Abhishek Pandit-Subedi wrote: > > On Fri, Nov 8, 2024 at 10:41 PM Dmitry Baryshkov > > <dmitry.baryshkov@linaro.org> wrote: > > > > > > On Thu, Nov 07, 2024 at 11:29:59AM -0800, Abhishek Pandit-Subedi wrote: > > > > Add support for entering and exiting Thunderbolt alt-mode using AP > > > > driven alt-mode. > > > > > > > > Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> > > > > --- > > > > > > > > Changes in v3: > > > > - Fix usage of TBT sid and mode. > > > > - Removed unused vdm operations during altmode registration > > > > > > > > Changes in v2: > > > > - Refactored thunderbolt support into cros_typec_altmode.c > > > > > > > > drivers/platform/chrome/Makefile | 3 + > > > > drivers/platform/chrome/cros_ec_typec.c | 23 +++--- > > > > drivers/platform/chrome/cros_typec_altmode.c | 85 ++++++++++++++++++++ > > > > drivers/platform/chrome/cros_typec_altmode.h | 14 ++++ > > > > 4 files changed, 114 insertions(+), 11 deletions(-) > > > > > > > > diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile > > > > index 2f90d4db8099..b9b1281de063 100644 > > > > --- a/drivers/platform/chrome/Makefile > > > > +++ b/drivers/platform/chrome/Makefile > > > > @@ -21,6 +21,9 @@ cros-ec-typec-objs := cros_ec_typec.o cros_typec_vdm.o > > > > ifneq ($(CONFIG_TYPEC_DP_ALTMODE),) > > > > cros-ec-typec-objs += cros_typec_altmode.o > > > > endif > > > > +ifneq ($(CONFIG_TYPEC_TBT_ALTMODE),) > > > > + cros-ec-typec-objs += cros_typec_altmode.o > > > > +endif > > > > > > Doesn't this also result in the object file being included twice and > > > thus in a duplicate symbols declaration? > > > > I was trying to figure out how to add this file if either of those > > config options existed in > > https://docs.kernel.org/kbuild/makefiles.html#built-in-object-goals-obj-y > > and it says, "Duplicates in the lists are allowed: the first instance > > will be linked into built-in.a and succeeding instances will be > > ignored." > > > > Is there a preferred way of doing the following in the Makefile: > > if (defined(CONFIG_TYPEC_TBT_ALTMODE) || > > defined(CONFIG_TYPEC_DP_ALTMODE)) {...} > > > > I briefly considered the following and dropped it because it is > > terrible readability-wise: > > ifneq ($(CONFIG_TYPEC_TBT_ALTMODE)$(CONFIG_TYPEC_DP_ALTMODE),) > > The usual way would to define new Kconfig symbol: > > config CROS_EC_TYPEC_ALTMODES > bool # Note, no description here, don't show in menuconfig > help > Selectable symbol to enable altmodes > > config CROS_EC_TYPEC > ... > select CROS_EC_TYPEC_ALTMODES if CONFIG_TYPEC_DP_ALTMODE > select CROS_EC_TYPEC_ALTMODES if CONFIG_TYPEC_TBT_ALTMODE > ... > > ---- > > cros-ec-typec-$(CONFIG_CROS_EC_TYPEC_ALTMODES) += cros_typec_altmode.o > > > > > > > > > > obj-$(CONFIG_CROS_EC_TYPEC) += cros-ec-typec.o > > > > > > > > obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o > > > > diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c > > > > index 3a6f5f2717b9..558b618df63c 100644 > > > > --- a/drivers/platform/chrome/cros_ec_typec.c > > > > +++ b/drivers/platform/chrome/cros_ec_typec.c > > > > @@ -302,18 +302,19 @@ static int cros_typec_register_port_altmodes(struct cros_typec_data *typec, > > > > > > > > /* > > > > * Register TBT compatibility alt mode. The EC will not enter the mode > > > > - * if it doesn't support it, so it's safe to register it unconditionally > > > > - * here for now. > > > > + * if it doesn't support it and it will not enter automatically by > > > > + * design so we can use the |ap_driven_altmode| feature to check if we > > > > + * should register it. > > > > */ > > > > - memset(&desc, 0, sizeof(desc)); > > > > - desc.svid = USB_TYPEC_TBT_SID; > > > > - desc.mode = TYPEC_ANY_MODE; > > > > - amode = typec_port_register_altmode(port->port, &desc); > > > > - if (IS_ERR(amode)) > > > > - return PTR_ERR(amode); > > > > - port->port_altmode[CROS_EC_ALTMODE_TBT] = amode; > > > > - typec_altmode_set_drvdata(amode, port); > > > > - amode->ops = &port_amode_ops; > > > > + if (typec->ap_driven_altmode) { > > > > + memset(&desc, 0, sizeof(desc)); > > > > + desc.svid = USB_TYPEC_TBT_SID; > > > > + desc.mode = TBT_MODE; > > > > + amode = cros_typec_register_thunderbolt(port, &desc); > > > > + if (IS_ERR(amode)) > > > > + return PTR_ERR(amode); > > > > + port->port_altmode[CROS_EC_ALTMODE_TBT] = amode; > > > > + } > > > > > > > > port->state.alt = NULL; > > > > port->state.mode = TYPEC_STATE_USB; > > > > diff --git a/drivers/platform/chrome/cros_typec_altmode.c b/drivers/platform/chrome/cros_typec_altmode.c > > > > index 3598b8a6ceee..9cf2cef6c277 100644 > > > > --- a/drivers/platform/chrome/cros_typec_altmode.c > > > > +++ b/drivers/platform/chrome/cros_typec_altmode.c > > > > @@ -8,6 +8,7 @@ > > > > #include "cros_ec_typec.h" > > > > > > > > #include <linux/usb/typec_dp.h> > > > > +#include <linux/usb/typec_tbt.h> > > > > #include <linux/usb/pd_vdo.h> > > > > > > > > #include "cros_typec_altmode.h" > > > > @@ -67,6 +68,8 @@ static int cros_typec_altmode_enter(struct typec_altmode *alt, u32 *vdo) > > > > > > > > if (data->sid == USB_TYPEC_DP_SID) > > > > req.mode_to_enter = CROS_EC_ALTMODE_DP; > > > > + else if (data->sid == USB_TYPEC_TBT_SID) > > > > + req.mode_to_enter = CROS_EC_ALTMODE_TBT; > > > > else > > > > return -EOPNOTSUPP; > > > > > > > > @@ -196,6 +199,53 @@ static int cros_typec_displayport_vdm(struct typec_altmode *alt, u32 header, > > > > return 0; > > > > } > > > > > > > > +static int cros_typec_thunderbolt_vdm(struct typec_altmode *alt, u32 header, > > > > + const u32 *data, int count) > > > > +{ > > > > + struct cros_typec_altmode_data *adata = typec_altmode_get_drvdata(alt); > > > > + > > > > + int cmd_type = PD_VDO_CMDT(header); > > > > + int cmd = PD_VDO_CMD(header); > > > > + int svdm_version; > > > > > > I suppose that with the current approach this misses the ap_mode_entry > > > check. If it gets moved to cros_typec_altmode_vdm(), then it should be > > > okay. > > > > We don't register the thunderbolt port driver if ap_mode_entry is > > false so it's an unnecessary check. > > Why don't you register it? It would allow userspace to understand, what > is happening, e.g. that the Type-C has switched to the TBT mode. Cros-EC does not support automatic entry of Thunderbolt/USB4 (i.e. all firmware that supports TBT/USB4 MUST set ap_mode_entry). > > > > > > > > > > + > > > > + svdm_version = typec_altmode_get_svdm_version(alt); > > > > + if (svdm_version < 0) > > > > + return svdm_version; > > > > + > > > > + switch (cmd_type) { > > > > + case CMDT_INIT: > > > > + if (PD_VDO_SVDM_VER(header) < svdm_version) { > > > > + typec_partner_set_svdm_version(adata->port->partner, > > > > + PD_VDO_SVDM_VER(header)); > > > > + svdm_version = PD_VDO_SVDM_VER(header); > > > > + } > > > > + > > > > + adata->header = VDO(adata->sid, 1, svdm_version, cmd); > > > > + adata->header |= VDO_OPOS(adata->mode); > > > > + > > > > + switch (cmd) { > > > > + case CMD_ENTER_MODE: > > > > + /* Don't respond to the enter mode vdm because it > > > > + * triggers mux configuration. This is handled directly > > > > + * by the cros_ec_typec driver so the Thunderbolt driver > > > > + * doesn't need to be involved. > > > > + */ > > > > + break; > > > > + default: > > > > + adata->header |= VDO_CMDT(CMDT_RSP_ACK); > > > > + schedule_work(&adata->work); > > > > + break; > > > > + } > > > > + > > > > + break; > > > > + default: > > > > + break; > > > > + } > > > > + > > > > + return 0; > > > > +} > > > > + > > > > + > > > > static int cros_typec_altmode_vdm(struct typec_altmode *alt, u32 header, > > > > const u32 *data, int count) > > > > { > > > > @@ -204,6 +254,9 @@ static int cros_typec_altmode_vdm(struct typec_altmode *alt, u32 header, > > > > if (adata->sid == USB_TYPEC_DP_SID) > > > > return cros_typec_displayport_vdm(alt, header, data, count); > > > > > > > > + if (adata->sid == USB_TYPEC_TBT_SID) > > > > + return cros_typec_thunderbolt_vdm(alt, header, data, count); > > > > + > > > > return -EINVAL; > > > > } > > > > > > > > @@ -273,3 +326,35 @@ cros_typec_register_displayport(struct cros_typec_port *port, > > > > return alt; > > > > } > > > > #endif > > > > + > > > > +#if IS_ENABLED(CONFIG_TYPEC_TBT_ALTMODE) > > > > +struct typec_altmode * > > > > +cros_typec_register_thunderbolt(struct cros_typec_port *port, > > > > + struct typec_altmode_desc *desc) > > > > +{ > > > > + struct typec_altmode *alt; > > > > + struct cros_typec_altmode_data *data; > > > > + > > > > + alt = typec_port_register_altmode(port->port, desc); > > > > + if (IS_ERR(alt)) > > > > + return alt; > > > > + > > > > + data = devm_kzalloc(&alt->dev, sizeof(*data), GFP_KERNEL); > > > > + if (!data) { > > > > + typec_unregister_altmode(alt); > > > > + return ERR_PTR(-ENOMEM); > > > > + } > > > > + > > > > + INIT_WORK(&data->work, cros_typec_altmode_work); > > > > + data->alt = alt; > > > > + data->port = port; > > > > + data->ap_mode_entry = true; > > > > + data->sid = desc->svid; > > > > + data->mode = desc->mode; > > > > + > > > > + typec_altmode_set_ops(alt, &cros_typec_altmode_ops); > > > > + typec_altmode_set_drvdata(alt, data); > > > > + > > > > + return alt; > > > > +} > > > > +#endif > > > > diff --git a/drivers/platform/chrome/cros_typec_altmode.h b/drivers/platform/chrome/cros_typec_altmode.h > > > > index c6f8fb02c99c..810b553ddcd8 100644 > > > > --- a/drivers/platform/chrome/cros_typec_altmode.h > > > > +++ b/drivers/platform/chrome/cros_typec_altmode.h > > > > @@ -31,4 +31,18 @@ static inline int cros_typec_displayport_status_update(struct typec_altmode *alt > > > > return 0; > > > > } > > > > #endif > > > > + > > > > +#if IS_ENABLED(CONFIG_TYPEC_TBT_ALTMODE) > > > > +struct typec_altmode * > > > > +cros_typec_register_thunderbolt(struct cros_typec_port *port, > > > > + struct typec_altmode_desc *desc); > > > > +#else > > > > +static inline struct typec_altmode * > > > > +cros_typec_register_thunderbolt(struct cros_typec_port *port, > > > > + struct typec_altmode_desc *desc) > > > > +{ > > > > + return typec_port_register_altmode(port->port, desc); > > > > +} > > > > +#endif > > > > + > > > > #endif /* __CROS_TYPEC_ALTMODE_H__ */ > > > > -- > > > > 2.47.0.277.g8800431eea-goog > > > > > > > > > > -- > > > With best wishes > > > Dmitry > > -- > With best wishes > Dmitry
On 7 December 2024 00:23:42 EET, Abhishek Pandit-Subedi <abhishekpandit@chromium.org> wrote: >On Thu, Nov 14, 2024 at 2:55 AM Dmitry Baryshkov ><dmitry.baryshkov@linaro.org> wrote: >> >> On Wed, Nov 13, 2024 at 08:01:57PM -0800, Abhishek Pandit-Subedi wrote: >> > On Fri, Nov 8, 2024 at 10:41 PM Dmitry Baryshkov >> > <dmitry.baryshkov@linaro.org> wrote: >> > > >> > > On Thu, Nov 07, 2024 at 11:29:59AM -0800, Abhishek Pandit-Subedi wrote: >> > > > Add support for entering and exiting Thunderbolt alt-mode using AP >> > > > driven alt-mode. >> > > > >> > > > Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> >> > > > --- >> > > > >> > > > Changes in v3: >> > > > - Fix usage of TBT sid and mode. >> > > > - Removed unused vdm operations during altmode registration >> > > > >> > > > Changes in v2: >> > > > - Refactored thunderbolt support into cros_typec_altmode.c >> > > > >> > > > drivers/platform/chrome/Makefile | 3 + >> > > > drivers/platform/chrome/cros_ec_typec.c | 23 +++--- >> > > > drivers/platform/chrome/cros_typec_altmode.c | 85 ++++++++++++++++++++ >> > > > drivers/platform/chrome/cros_typec_altmode.h | 14 ++++ >> > > > 4 files changed, 114 insertions(+), 11 deletions(-) >> > > > >> > > > diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile >> > > > index 2f90d4db8099..b9b1281de063 100644 >> > > > --- a/drivers/platform/chrome/Makefile >> > > > +++ b/drivers/platform/chrome/Makefile >> > > > @@ -21,6 +21,9 @@ cros-ec-typec-objs := cros_ec_typec.o cros_typec_vdm.o >> > > > ifneq ($(CONFIG_TYPEC_DP_ALTMODE),) >> > > > cros-ec-typec-objs += cros_typec_altmode.o >> > > > endif >> > > > +ifneq ($(CONFIG_TYPEC_TBT_ALTMODE),) >> > > > + cros-ec-typec-objs += cros_typec_altmode.o >> > > > +endif >> > > >> > > Doesn't this also result in the object file being included twice and >> > > thus in a duplicate symbols declaration? >> > >> > I was trying to figure out how to add this file if either of those >> > config options existed in >> > https://docs.kernel.org/kbuild/makefiles.html#built-in-object-goals-obj-y >> > and it says, "Duplicates in the lists are allowed: the first instance >> > will be linked into built-in.a and succeeding instances will be >> > ignored." >> > >> > Is there a preferred way of doing the following in the Makefile: >> > if (defined(CONFIG_TYPEC_TBT_ALTMODE) || >> > defined(CONFIG_TYPEC_DP_ALTMODE)) {...} >> > >> > I briefly considered the following and dropped it because it is >> > terrible readability-wise: >> > ifneq ($(CONFIG_TYPEC_TBT_ALTMODE)$(CONFIG_TYPEC_DP_ALTMODE),) >> >> The usual way would to define new Kconfig symbol: >> >> config CROS_EC_TYPEC_ALTMODES >> bool # Note, no description here, don't show in menuconfig >> help >> Selectable symbol to enable altmodes >> >> config CROS_EC_TYPEC >> ... >> select CROS_EC_TYPEC_ALTMODES if CONFIG_TYPEC_DP_ALTMODE >> select CROS_EC_TYPEC_ALTMODES if CONFIG_TYPEC_TBT_ALTMODE >> ... >> >> ---- >> >> cros-ec-typec-$(CONFIG_CROS_EC_TYPEC_ALTMODES) += cros_typec_altmode.o >> >> > >> > > >> > > > obj-$(CONFIG_CROS_EC_TYPEC) += cros-ec-typec.o >> > > > >> > > > obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o >> > > > diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c >> > > > index 3a6f5f2717b9..558b618df63c 100644 >> > > > --- a/drivers/platform/chrome/cros_ec_typec.c >> > > > +++ b/drivers/platform/chrome/cros_ec_typec.c >> > > > @@ -302,18 +302,19 @@ static int cros_typec_register_port_altmodes(struct cros_typec_data *typec, >> > > > >> > > > /* >> > > > * Register TBT compatibility alt mode. The EC will not enter the mode >> > > > - * if it doesn't support it, so it's safe to register it unconditionally >> > > > - * here for now. >> > > > + * if it doesn't support it and it will not enter automatically by >> > > > + * design so we can use the |ap_driven_altmode| feature to check if we >> > > > + * should register it. >> > > > */ >> > > > - memset(&desc, 0, sizeof(desc)); >> > > > - desc.svid = USB_TYPEC_TBT_SID; >> > > > - desc.mode = TYPEC_ANY_MODE; >> > > > - amode = typec_port_register_altmode(port->port, &desc); >> > > > - if (IS_ERR(amode)) >> > > > - return PTR_ERR(amode); >> > > > - port->port_altmode[CROS_EC_ALTMODE_TBT] = amode; >> > > > - typec_altmode_set_drvdata(amode, port); >> > > > - amode->ops = &port_amode_ops; >> > > > + if (typec->ap_driven_altmode) { >> > > > + memset(&desc, 0, sizeof(desc)); >> > > > + desc.svid = USB_TYPEC_TBT_SID; >> > > > + desc.mode = TBT_MODE; >> > > > + amode = cros_typec_register_thunderbolt(port, &desc); >> > > > + if (IS_ERR(amode)) >> > > > + return PTR_ERR(amode); >> > > > + port->port_altmode[CROS_EC_ALTMODE_TBT] = amode; >> > > > + } >> > > > >> > > > port->state.alt = NULL; >> > > > port->state.mode = TYPEC_STATE_USB; >> > > > diff --git a/drivers/platform/chrome/cros_typec_altmode.c b/drivers/platform/chrome/cros_typec_altmode.c >> > > > index 3598b8a6ceee..9cf2cef6c277 100644 >> > > > --- a/drivers/platform/chrome/cros_typec_altmode.c >> > > > +++ b/drivers/platform/chrome/cros_typec_altmode.c >> > > > @@ -8,6 +8,7 @@ >> > > > #include "cros_ec_typec.h" >> > > > >> > > > #include <linux/usb/typec_dp.h> >> > > > +#include <linux/usb/typec_tbt.h> >> > > > #include <linux/usb/pd_vdo.h> >> > > > >> > > > #include "cros_typec_altmode.h" >> > > > @@ -67,6 +68,8 @@ static int cros_typec_altmode_enter(struct typec_altmode *alt, u32 *vdo) >> > > > >> > > > if (data->sid == USB_TYPEC_DP_SID) >> > > > req.mode_to_enter = CROS_EC_ALTMODE_DP; >> > > > + else if (data->sid == USB_TYPEC_TBT_SID) >> > > > + req.mode_to_enter = CROS_EC_ALTMODE_TBT; >> > > > else >> > > > return -EOPNOTSUPP; >> > > > >> > > > @@ -196,6 +199,53 @@ static int cros_typec_displayport_vdm(struct typec_altmode *alt, u32 header, >> > > > return 0; >> > > > } >> > > > >> > > > +static int cros_typec_thunderbolt_vdm(struct typec_altmode *alt, u32 header, >> > > > + const u32 *data, int count) >> > > > +{ >> > > > + struct cros_typec_altmode_data *adata = typec_altmode_get_drvdata(alt); >> > > > + >> > > > + int cmd_type = PD_VDO_CMDT(header); >> > > > + int cmd = PD_VDO_CMD(header); >> > > > + int svdm_version; >> > > >> > > I suppose that with the current approach this misses the ap_mode_entry >> > > check. If it gets moved to cros_typec_altmode_vdm(), then it should be >> > > okay. >> > >> > We don't register the thunderbolt port driver if ap_mode_entry is >> > false so it's an unnecessary check. >> >> Why don't you register it? It would allow userspace to understand, what >> is happening, e.g. that the Type-C has switched to the TBT mode. > >Cros-EC does not support automatic entry of Thunderbolt/USB4 (i.e. all >firmware that supports TBT/USB4 MUST set ap_mode_entry). Then this definitely looks like something that should also be handled by boltctl. Please consider patching it. > >> >> > >> > > >> > > > + >> > > > + svdm_version = typec_altmode_get_svdm_version(alt); >> > > > + if (svdm_version < 0) >> > > > + return svdm_version; >> > > > + >> > > > + switch (cmd_type) { >> > > > + case CMDT_INIT: >> > > > + if (PD_VDO_SVDM_VER(header) < svdm_version) { >> > > > + typec_partner_set_svdm_version(adata->port->partner, >> > > > + PD_VDO_SVDM_VER(header)); >> > > > + svdm_version = PD_VDO_SVDM_VER(header); >> > > > + } >> > > > + >> > > > + adata->header = VDO(adata->sid, 1, svdm_version, cmd); >> > > > + adata->header |= VDO_OPOS(adata->mode); >> > > > + >> > > > + switch (cmd) { >> > > > + case CMD_ENTER_MODE: >> > > > + /* Don't respond to the enter mode vdm because it >> > > > + * triggers mux configuration. This is handled directly >> > > > + * by the cros_ec_typec driver so the Thunderbolt driver >> > > > + * doesn't need to be involved. >> > > > + */ >> > > > + break; >> > > > + default: >> > > > + adata->header |= VDO_CMDT(CMDT_RSP_ACK); >> > > > + schedule_work(&adata->work); >> > > > + break; >> > > > + } >> > > > + >> > > > + break; >> > > > + default: >> > > > + break; >> > > > + } >> > > > + >> > > > + return 0; >> > > > +} >> > > > + >> > > > + >> > > > static int cros_typec_altmode_vdm(struct typec_altmode *alt, u32 header, >> > > > const u32 *data, int count) >> > > > { >> > > > @@ -204,6 +254,9 @@ static int cros_typec_altmode_vdm(struct typec_altmode *alt, u32 header, >> > > > if (adata->sid == USB_TYPEC_DP_SID) >> > > > return cros_typec_displayport_vdm(alt, header, data, count); >> > > > >> > > > + if (adata->sid == USB_TYPEC_TBT_SID) >> > > > + return cros_typec_thunderbolt_vdm(alt, header, data, count); >> > > > + >> > > > return -EINVAL; >> > > > } >> > > > >> > > > @@ -273,3 +326,35 @@ cros_typec_register_displayport(struct cros_typec_port *port, >> > > > return alt; >> > > > } >> > > > #endif >> > > > + >> > > > +#if IS_ENABLED(CONFIG_TYPEC_TBT_ALTMODE) >> > > > +struct typec_altmode * >> > > > +cros_typec_register_thunderbolt(struct cros_typec_port *port, >> > > > + struct typec_altmode_desc *desc) >> > > > +{ >> > > > + struct typec_altmode *alt; >> > > > + struct cros_typec_altmode_data *data; >> > > > + >> > > > + alt = typec_port_register_altmode(port->port, desc); >> > > > + if (IS_ERR(alt)) >> > > > + return alt; >> > > > + >> > > > + data = devm_kzalloc(&alt->dev, sizeof(*data), GFP_KERNEL); >> > > > + if (!data) { >> > > > + typec_unregister_altmode(alt); >> > > > + return ERR_PTR(-ENOMEM); >> > > > + } >> > > > + >> > > > + INIT_WORK(&data->work, cros_typec_altmode_work); >> > > > + data->alt = alt; >> > > > + data->port = port; >> > > > + data->ap_mode_entry = true; >> > > > + data->sid = desc->svid; >> > > > + data->mode = desc->mode; >> > > > + >> > > > + typec_altmode_set_ops(alt, &cros_typec_altmode_ops); >> > > > + typec_altmode_set_drvdata(alt, data); >> > > > + >> > > > + return alt; >> > > > +} >> > > > +#endif >> > > > diff --git a/drivers/platform/chrome/cros_typec_altmode.h b/drivers/platform/chrome/cros_typec_altmode.h >> > > > index c6f8fb02c99c..810b553ddcd8 100644 >> > > > --- a/drivers/platform/chrome/cros_typec_altmode.h >> > > > +++ b/drivers/platform/chrome/cros_typec_altmode.h >> > > > @@ -31,4 +31,18 @@ static inline int cros_typec_displayport_status_update(struct typec_altmode *alt >> > > > return 0; >> > > > } >> > > > #endif >> > > > + >> > > > +#if IS_ENABLED(CONFIG_TYPEC_TBT_ALTMODE) >> > > > +struct typec_altmode * >> > > > +cros_typec_register_thunderbolt(struct cros_typec_port *port, >> > > > + struct typec_altmode_desc *desc); >> > > > +#else >> > > > +static inline struct typec_altmode * >> > > > +cros_typec_register_thunderbolt(struct cros_typec_port *port, >> > > > + struct typec_altmode_desc *desc) >> > > > +{ >> > > > + return typec_port_register_altmode(port->port, desc); >> > > > +} >> > > > +#endif >> > > > + >> > > > #endif /* __CROS_TYPEC_ALTMODE_H__ */ >> > > > -- >> > > > 2.47.0.277.g8800431eea-goog >> > > > >> > > >> > > -- >> > > With best wishes >> > > Dmitry >> >> -- >> With best wishes >> Dmitry
diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile index 2f90d4db8099..b9b1281de063 100644 --- a/drivers/platform/chrome/Makefile +++ b/drivers/platform/chrome/Makefile @@ -21,6 +21,9 @@ cros-ec-typec-objs := cros_ec_typec.o cros_typec_vdm.o ifneq ($(CONFIG_TYPEC_DP_ALTMODE),) cros-ec-typec-objs += cros_typec_altmode.o endif +ifneq ($(CONFIG_TYPEC_TBT_ALTMODE),) + cros-ec-typec-objs += cros_typec_altmode.o +endif obj-$(CONFIG_CROS_EC_TYPEC) += cros-ec-typec.o obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c index 3a6f5f2717b9..558b618df63c 100644 --- a/drivers/platform/chrome/cros_ec_typec.c +++ b/drivers/platform/chrome/cros_ec_typec.c @@ -302,18 +302,19 @@ static int cros_typec_register_port_altmodes(struct cros_typec_data *typec, /* * Register TBT compatibility alt mode. The EC will not enter the mode - * if it doesn't support it, so it's safe to register it unconditionally - * here for now. + * if it doesn't support it and it will not enter automatically by + * design so we can use the |ap_driven_altmode| feature to check if we + * should register it. */ - memset(&desc, 0, sizeof(desc)); - desc.svid = USB_TYPEC_TBT_SID; - desc.mode = TYPEC_ANY_MODE; - amode = typec_port_register_altmode(port->port, &desc); - if (IS_ERR(amode)) - return PTR_ERR(amode); - port->port_altmode[CROS_EC_ALTMODE_TBT] = amode; - typec_altmode_set_drvdata(amode, port); - amode->ops = &port_amode_ops; + if (typec->ap_driven_altmode) { + memset(&desc, 0, sizeof(desc)); + desc.svid = USB_TYPEC_TBT_SID; + desc.mode = TBT_MODE; + amode = cros_typec_register_thunderbolt(port, &desc); + if (IS_ERR(amode)) + return PTR_ERR(amode); + port->port_altmode[CROS_EC_ALTMODE_TBT] = amode; + } port->state.alt = NULL; port->state.mode = TYPEC_STATE_USB; diff --git a/drivers/platform/chrome/cros_typec_altmode.c b/drivers/platform/chrome/cros_typec_altmode.c index 3598b8a6ceee..9cf2cef6c277 100644 --- a/drivers/platform/chrome/cros_typec_altmode.c +++ b/drivers/platform/chrome/cros_typec_altmode.c @@ -8,6 +8,7 @@ #include "cros_ec_typec.h" #include <linux/usb/typec_dp.h> +#include <linux/usb/typec_tbt.h> #include <linux/usb/pd_vdo.h> #include "cros_typec_altmode.h" @@ -67,6 +68,8 @@ static int cros_typec_altmode_enter(struct typec_altmode *alt, u32 *vdo) if (data->sid == USB_TYPEC_DP_SID) req.mode_to_enter = CROS_EC_ALTMODE_DP; + else if (data->sid == USB_TYPEC_TBT_SID) + req.mode_to_enter = CROS_EC_ALTMODE_TBT; else return -EOPNOTSUPP; @@ -196,6 +199,53 @@ static int cros_typec_displayport_vdm(struct typec_altmode *alt, u32 header, return 0; } +static int cros_typec_thunderbolt_vdm(struct typec_altmode *alt, u32 header, + const u32 *data, int count) +{ + struct cros_typec_altmode_data *adata = typec_altmode_get_drvdata(alt); + + int cmd_type = PD_VDO_CMDT(header); + int cmd = PD_VDO_CMD(header); + int svdm_version; + + svdm_version = typec_altmode_get_svdm_version(alt); + if (svdm_version < 0) + return svdm_version; + + switch (cmd_type) { + case CMDT_INIT: + if (PD_VDO_SVDM_VER(header) < svdm_version) { + typec_partner_set_svdm_version(adata->port->partner, + PD_VDO_SVDM_VER(header)); + svdm_version = PD_VDO_SVDM_VER(header); + } + + adata->header = VDO(adata->sid, 1, svdm_version, cmd); + adata->header |= VDO_OPOS(adata->mode); + + switch (cmd) { + case CMD_ENTER_MODE: + /* Don't respond to the enter mode vdm because it + * triggers mux configuration. This is handled directly + * by the cros_ec_typec driver so the Thunderbolt driver + * doesn't need to be involved. + */ + break; + default: + adata->header |= VDO_CMDT(CMDT_RSP_ACK); + schedule_work(&adata->work); + break; + } + + break; + default: + break; + } + + return 0; +} + + static int cros_typec_altmode_vdm(struct typec_altmode *alt, u32 header, const u32 *data, int count) { @@ -204,6 +254,9 @@ static int cros_typec_altmode_vdm(struct typec_altmode *alt, u32 header, if (adata->sid == USB_TYPEC_DP_SID) return cros_typec_displayport_vdm(alt, header, data, count); + if (adata->sid == USB_TYPEC_TBT_SID) + return cros_typec_thunderbolt_vdm(alt, header, data, count); + return -EINVAL; } @@ -273,3 +326,35 @@ cros_typec_register_displayport(struct cros_typec_port *port, return alt; } #endif + +#if IS_ENABLED(CONFIG_TYPEC_TBT_ALTMODE) +struct typec_altmode * +cros_typec_register_thunderbolt(struct cros_typec_port *port, + struct typec_altmode_desc *desc) +{ + struct typec_altmode *alt; + struct cros_typec_altmode_data *data; + + alt = typec_port_register_altmode(port->port, desc); + if (IS_ERR(alt)) + return alt; + + data = devm_kzalloc(&alt->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + typec_unregister_altmode(alt); + return ERR_PTR(-ENOMEM); + } + + INIT_WORK(&data->work, cros_typec_altmode_work); + data->alt = alt; + data->port = port; + data->ap_mode_entry = true; + data->sid = desc->svid; + data->mode = desc->mode; + + typec_altmode_set_ops(alt, &cros_typec_altmode_ops); + typec_altmode_set_drvdata(alt, data); + + return alt; +} +#endif diff --git a/drivers/platform/chrome/cros_typec_altmode.h b/drivers/platform/chrome/cros_typec_altmode.h index c6f8fb02c99c..810b553ddcd8 100644 --- a/drivers/platform/chrome/cros_typec_altmode.h +++ b/drivers/platform/chrome/cros_typec_altmode.h @@ -31,4 +31,18 @@ static inline int cros_typec_displayport_status_update(struct typec_altmode *alt return 0; } #endif + +#if IS_ENABLED(CONFIG_TYPEC_TBT_ALTMODE) +struct typec_altmode * +cros_typec_register_thunderbolt(struct cros_typec_port *port, + struct typec_altmode_desc *desc); +#else +static inline struct typec_altmode * +cros_typec_register_thunderbolt(struct cros_typec_port *port, + struct typec_altmode_desc *desc) +{ + return typec_port_register_altmode(port->port, desc); +} +#endif + #endif /* __CROS_TYPEC_ALTMODE_H__ */
Add support for entering and exiting Thunderbolt alt-mode using AP driven alt-mode. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> --- Changes in v3: - Fix usage of TBT sid and mode. - Removed unused vdm operations during altmode registration Changes in v2: - Refactored thunderbolt support into cros_typec_altmode.c drivers/platform/chrome/Makefile | 3 + drivers/platform/chrome/cros_ec_typec.c | 23 +++--- drivers/platform/chrome/cros_typec_altmode.c | 85 ++++++++++++++++++++ drivers/platform/chrome/cros_typec_altmode.h | 14 ++++ 4 files changed, 114 insertions(+), 11 deletions(-)