@@ -127,8 +127,25 @@ static int hd3ss3220_set_port_type(struct hd3ss3220 *hd3ss3220, int type)
return err;
}
-static int hd3ss3220_set_source_pref(struct hd3ss3220 *hd3ss3220, int src_pref)
+static int hd3ss3220_set_source_pref(struct hd3ss3220 *hd3ss3220, int prefer_role)
{
+ int src_pref;
+
+ switch (prefer_role) {
+ case TYPEC_NO_PREFERRED_ROLE:
+ src_pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT;
+ break;
+ case TYPEC_SINK:
+ src_pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK;
+ break;
+ case TYPEC_SOURCE:
+ src_pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC;
+ break;
+ default:
+ dev_err(hd3ss3220->dev, "bad role preference: %d\n", prefer_role);
+ return -EINVAL;
+ }
+
return regmap_update_bits(hd3ss3220->regmap, HD3SS3220_REG_GEN_CTRL,
HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK,
src_pref);
@@ -160,27 +177,11 @@ static enum usb_role hd3ss3220_get_attached_state(struct hd3ss3220 *hd3ss3220)
return attached_state;
}
-static int hd3ss3220_dr_set(struct typec_port *port, enum typec_data_role role)
+static int hd3ss3220_try_role(struct typec_port *port, int role)
{
struct hd3ss3220 *hd3ss3220 = typec_get_drvdata(port);
- enum usb_role role_val;
- int pref, ret = 0;
- if (role == TYPEC_HOST) {
- role_val = USB_ROLE_HOST;
- pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC;
- } else {
- role_val = USB_ROLE_DEVICE;
- pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK;
- }
-
- ret = hd3ss3220_set_source_pref(hd3ss3220, pref);
- usleep_range(10, 100);
-
- usb_role_switch_set_role(hd3ss3220->role_sw, role_val);
- typec_set_data_role(hd3ss3220->port, role);
-
- return ret;
+ return hd3ss3220_set_source_pref(hd3ss3220, role);
}
static int hd3ss3220_port_type_set(struct typec_port *port, enum typec_port_type type)
@@ -191,7 +192,7 @@ static int hd3ss3220_port_type_set(struct typec_port *port, enum typec_port_type
}
static const struct typec_operations hd3ss3220_ops = {
- .dr_set = hd3ss3220_dr_set,
+ .try_role = hd3ss3220_try_role,
.port_type_set = hd3ss3220_port_type_set,
};
@@ -200,9 +201,6 @@ static void hd3ss3220_set_role(struct hd3ss3220 *hd3ss3220)
enum usb_role role_state = hd3ss3220_get_attached_state(hd3ss3220);
usb_role_switch_set_role(hd3ss3220->role_sw, role_state);
- if (role_state == USB_ROLE_NONE)
- hd3ss3220_set_source_pref(hd3ss3220,
- HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT);
switch (role_state) {
case USB_ROLE_HOST:
@@ -297,8 +295,6 @@ static int hd3ss3220_probe(struct i2c_client *client)
if (IS_ERR(hd3ss3220->regmap))
return PTR_ERR(hd3ss3220->regmap);
- hd3ss3220_set_source_pref(hd3ss3220,
- HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT);
/* For backward compatibility check the connector child node first */
connector = device_get_named_child_node(hd3ss3220->dev, "connector");
if (connector) {
@@ -333,6 +329,10 @@ static int hd3ss3220_probe(struct i2c_client *client)
if (ret != 0 && ret != -EINVAL && ret != -ENXIO)
goto err_put_role;
+ ret = hd3ss3220_set_source_pref(hd3ss3220, typec_cap.prefer_role);
+ if (ret < 0)
+ goto err_put_role;
+
ret = hd3ss3220_set_port_type(hd3ss3220, typec_cap.type);
if (ret < 0)
goto err_put_role;
The TI HD3SS3220 Type-C controller supports configuring its role preference when operating as a dual-role port through the SOURCE_PREF field of the General Control Register. The previous driver behavior was to set the role preference based on the dr_set typec_operation. However, the controller does not support swapping the data role on an active connection due to its lack of Power Delivery support. Remove previous dr_set typec_operation, and support setting the role preference based on the corresponding fwnode property, as well as the try_role typec_operation. Signed-off-by: Oliver Facklam <oliver.facklam@zuehlke.com> --- drivers/usb/typec/hd3ss3220.c | 50 +++++++++++++++++++++---------------------- 1 file changed, 25 insertions(+), 25 deletions(-)