diff mbox series

[2/5] usb: mtu3: enable hardware remote wakeup from L1 automatically

Message ID 2105ae1c2fede0fd1923e2fdb58ade7b3aa678f6.1543458320.git.chunfeng.yun@mediatek.com (mailing list archive)
State Mainlined
Commit 29ae096ef93a9df78a4b86e49ef916afa8e7c34b
Headers show
Series [1/5] usb: mtu3: remove QMU checksum | expand

Commit Message

Chunfeng Yun (云春峰) Nov. 29, 2018, 2:34 a.m. UTC 
Enable hardware remote wakeup from L1 automatically based on the FIFO
status, instead of manual way.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/mtu3/mtu3_core.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 3dce5fd9887d..981e4e8c5c13 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -180,7 +180,7 @@  static void mtu3_intr_enable(struct mtu3 *mtu)
 	mtu3_writel(mbase, U3D_LV1IESR, value);
 
 	/* Enable U2 common USB interrupts */
-	value = SUSPEND_INTR | RESUME_INTR | RESET_INTR | LPM_RESUME_INTR;
+	value = SUSPEND_INTR | RESUME_INTR | RESET_INTR;
 	mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value);
 
 	if (mtu->is_u3_ip) {
@@ -594,6 +594,8 @@  static void mtu3_regs_init(struct mtu3 *mtu)
 	mtu3_writel(mbase, U3D_DEVICE_CONF, 0);
 	/* vbus detected by HW */
 	mtu3_clrbits(mbase, U3D_MISC_CTRL, VBUS_FRC_EN | VBUS_ON);
+	/* enable automatical HWRW from L1 */
+	mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, LPM_HRWE);
 }
 
 static irqreturn_t mtu3_link_isr(struct mtu3 *mtu)
@@ -706,12 +708,6 @@  static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu)
 	if (u2comm & RESET_INTR)
 		mtu3_gadget_reset(mtu);
 
-	if (u2comm & LPM_RESUME_INTR) {
-		if (!(mtu3_readl(mbase, U3D_POWER_MANAGEMENT) & LPM_HRWE))
-			mtu3_setbits(mbase, U3D_USB20_MISC_CONTROL,
-				     LPM_U3_ACK_EN);
-	}
-
 	return IRQ_HANDLED;
 }