| Message ID | 22f62c59471e128b681a731997a9416ab2e91acf.1628085910.git.baruch@tkos.co.il (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/6] dt-bindings: phy: qcom,qmp: Add IPQ6018 USB3 PHY | expand |
On Wed, Aug 04, 2021 at 05:05:07PM +0300, Baruch Siach wrote: > Document the snps,ref-clock-period property that describes reference > clock period when it deviates from the default set value. > > Signed-off-by: Baruch Siach <baruch@tkos.co.il> > --- > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > index 41416fbd92aa..c8027d2852cd 100644 > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > @@ -252,6 +252,15 @@ properties: > minimum: 0 > maximum: 0x3f > > + snps,ref-clock-period: > + description: > + Value for REFCLKPER field of GUCTL register for post-silicon reference Why is post-silicon relevant here? Everything upstream should be for post-silicon. I've seen and done the hacks to make pre-silicon testing work and we don't need those upstream. > + clock period in nanoseconds, when the hardware set default does not match If you have units, then use property unit suffix in the name. > + the actual clock. > + $ref: /schemas/types.yaml#/definitions/uint32 And then you can drop the type. However, if the h/w block gets a ref clock why isn't it described in 'clocks' and then you can just read why the frequency is and calculate the period.
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 41416fbd92aa..c8027d2852cd 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -252,6 +252,15 @@ properties: minimum: 0 maximum: 0x3f + snps,ref-clock-period: + description: + Value for REFCLKPER field of GUCTL register for post-silicon reference + clock period in nanoseconds, when the hardware set default does not match + the actual clock. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 0x3ff + snps,rx-thr-num-pkt-prd: description: Periodic ESS RX packet threshold count (host mode only). Set this and
Document the snps,ref-clock-period property that describes reference clock period when it deviates from the default set value. Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 9 +++++++++ 1 file changed, 9 insertions(+)