@@ -165,6 +165,47 @@ enum usb_dr_mode usb_get_dr_mode(struct device *dev)
}
EXPORT_SYMBOL_GPL(usb_get_dr_mode);
+/**
+ * usb_decode_interval - Decode bInterval into the time expressed in 1us unit
+ * @epd: The descriptor of the endpoint
+ * @speed: The speed that the endpoint works as
+ *
+ * Function returns the interval expressed in 1us unit for servicing
+ * endpoint for data transfers.
+ */
+unsigned int usb_decode_interval(const struct usb_endpoint_descriptor *epd,
+ enum usb_device_speed speed)
+{
+ unsigned int interval = 0;
+
+ switch (usb_endpoint_type(epd)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ /* uframes per NAK */
+ if (speed == USB_SPEED_HIGH)
+ interval = epd->bInterval;
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ interval = 1 << (epd->bInterval - 1);
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ /* uframes per NAK */
+ if (speed == USB_SPEED_HIGH && usb_endpoint_dir_out(epd))
+ interval = epd->bInterval;
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (speed >= USB_SPEED_HIGH)
+ interval = 1 << (epd->bInterval - 1);
+ else
+ interval = epd->bInterval;
+ break;
+ }
+
+ interval *= (speed >= USB_SPEED_HIGH) ? 125 : 1000;
+
+ return interval;
+}
+EXPORT_SYMBOL_GPL(usb_decode_interval);
+
#ifdef CONFIG_OF
/**
* of_usb_get_dr_mode_by_phy - Get dual role mode for the controller device
@@ -157,38 +157,25 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_CONTROL:
type = "Ctrl";
- if (speed == USB_SPEED_HIGH) /* uframes per NAK */
- interval = desc->bInterval;
- else
- interval = 0;
dir = 'B'; /* ctrl is bidirectional */
break;
case USB_ENDPOINT_XFER_ISOC:
type = "Isoc";
- interval = 1 << (desc->bInterval - 1);
break;
case USB_ENDPOINT_XFER_BULK:
type = "Bulk";
- if (speed == USB_SPEED_HIGH && dir == 'O') /* uframes per NAK */
- interval = desc->bInterval;
- else
- interval = 0;
break;
case USB_ENDPOINT_XFER_INT:
type = "Int.";
- if (speed == USB_SPEED_HIGH || speed >= USB_SPEED_SUPER)
- interval = 1 << (desc->bInterval - 1);
- else
- interval = desc->bInterval;
break;
default: /* "can't happen" */
return start;
}
- interval *= (speed == USB_SPEED_HIGH ||
- speed >= USB_SPEED_SUPER) ? 125 : 1000;
- if (interval % 1000)
+
+ interval = usb_decode_interval(desc, speed);
+ if (interval % 1000) {
unit = 'u';
- else {
+ } else {
unit = 'm';
interval /= 1000;
}
@@ -84,40 +84,13 @@ static ssize_t interval_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct ep_device *ep = to_ep_device(dev);
+ unsigned int interval;
char unit;
- unsigned interval = 0;
- unsigned in;
- in = (ep->desc->bEndpointAddress & USB_DIR_IN);
-
- switch (usb_endpoint_type(ep->desc)) {
- case USB_ENDPOINT_XFER_CONTROL:
- if (ep->udev->speed == USB_SPEED_HIGH)
- /* uframes per NAK */
- interval = ep->desc->bInterval;
- break;
-
- case USB_ENDPOINT_XFER_ISOC:
- interval = 1 << (ep->desc->bInterval - 1);
- break;
-
- case USB_ENDPOINT_XFER_BULK:
- if (ep->udev->speed == USB_SPEED_HIGH && !in)
- /* uframes per NAK */
- interval = ep->desc->bInterval;
- break;
-
- case USB_ENDPOINT_XFER_INT:
- if (ep->udev->speed == USB_SPEED_HIGH)
- interval = 1 << (ep->desc->bInterval - 1);
- else
- interval = ep->desc->bInterval;
- break;
- }
- interval *= (ep->udev->speed == USB_SPEED_HIGH) ? 125 : 1000;
- if (interval % 1000)
+ interval = usb_decode_interval(ep->desc, ep->udev->speed);
+ if (interval % 1000) {
unit = 'u';
- else {
+ } else {
unit = 'm';
interval /= 1000;
}
@@ -90,6 +90,9 @@ extern enum usb_ssp_rate usb_get_maximum_ssp_rate(struct device *dev);
*/
extern const char *usb_state_string(enum usb_device_state state);
+unsigned int usb_decode_interval(const struct usb_endpoint_descriptor *epd,
+ enum usb_device_speed speed);
+
#ifdef CONFIG_TRACING
/**
* usb_decode_ctrl - Returns human readable representation of control request.
Add a new function to convert bInterval into the time expressed in 1us unit. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- v2: move kerneldoc next to function's definition suggested by Alan --- drivers/usb/common/common.c | 41 +++++++++++++++++++++++++++++++++++++ drivers/usb/core/devices.c | 21 ++++--------------- drivers/usb/core/endpoint.c | 35 ++++--------------------------- include/linux/usb/ch9.h | 3 +++ 4 files changed, 52 insertions(+), 48 deletions(-)