@@ -613,4 +613,16 @@ config USB_NET_CH9200
To compile this driver as a module, choose M here: the
module will be called ch9200.
+config USB_NET_AQC111
+ tristate "Aquantia AQtion USB to 5/2.5GbE Controllers support"
+ depends on USB_USBNET
+ select CRC32
+ default y
+ help
+ This option adds support for Aquantia AQtion USB
+ Ethernet adapters based on AQC111U/AQC112 chips.
+
+ This driver should work with at least the following devices:
+ * Aquantia AQtion USB to 5GbE
+
endif # USB_NET_DRIVERS
@@ -40,3 +40,4 @@ obj-$(CONFIG_USB_VL600) += lg-vl600.o
obj-$(CONFIG_USB_NET_QMI_WWAN) += qmi_wwan.o
obj-$(CONFIG_USB_NET_CDC_MBIM) += cdc_mbim.o
obj-$(CONFIG_USB_NET_CH9200) += ch9200.o
+obj-$(CONFIG_USB_NET_AQC111) += aqc111.o
new file mode 100644
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Aquantia Corp. Aquantia AQtion USB to 5GbE Controller
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2002-2003 TiVo Inc.
+ * Copyright (C) 2017-2018 ASIX
+ * Copyright (C) 2018 Aquantia Corp.
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+
+static const struct driver_info aqc111_info = {
+ .description = "Aquantia AQtion USB to 5GbE Controller",
+};
+
+#define AQC111_USB_ETH_DEV(vid, pid, table) \
+ USB_DEVICE_INTERFACE_CLASS((vid), (pid), USB_CLASS_VENDOR_SPEC), \
+ .driver_info = (unsigned long)&(table)
+
+static const struct usb_device_id products[] = {
+ {AQC111_USB_ETH_DEV(0x2eca, 0xc101, aqc111_info)},
+ { },/* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver aq_driver = {
+ .name = "aqc111",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+};
+
+module_usb_driver(aq_driver);
+
+MODULE_DESCRIPTION("Aquantia AQtion USB to 5/2.5GbE Controllers");
+MODULE_LICENSE("GPL");