| Message ID | 878scnygxb.fsf@kernel.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 21c949b21802341411937291fb04e153b3c8f471 |
| Headers | show |
| Series | [GIT,PULL] USB changes for v5.10 | expand |
On Sat, Oct 03, 2020 at 09:14:40AM +0300, Felipe Balbi wrote: > > Hi Greg, > > Here's the big gadget pull request. Patches have been around for quite a > while and I think all the little linux-next problems have been found. > > Let me know if you want anything to be changed. > > cheers > > The following changes since commit ba4f184e126b751d1bffad5897f263108befc780: > > Linux 5.9-rc6 (2020-09-20 16:33:55 -0700) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git tags/usb-for-v5.10 Looks good, pulled and pushed out now, thanks. greg k-h
Hi Greg, Here's the big gadget pull request. Patches have been around for quite a while and I think all the little linux-next problems have been found. Let me know if you want anything to be changed. cheers The following changes since commit ba4f184e126b751d1bffad5897f263108befc780: Linux 5.9-rc6 (2020-09-20 16:33:55 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git tags/usb-for-v5.10 for you to fetch changes up to b2c586eb07efab982419f32b7c3bd96829bc8bcd: usb: dwc2: Fix INTR OUT transfers in DDMA mode. (2020-10-02 13:29:13 +0300) ---------------------------------------------------------------- USB: changes for v5.10 merge window Most of changes are on dwc3 (38.8%) with cdns3 falling close behind (24.1%). The biggest changes here are a series of non-critical fixes to corner cases on dwc3, produced by Thinh N, and a series of major improvements to cdns3 produced by Peter C. We also have the traditional set of new device support (Intel Keem Bay, Hikey 970) on dwc3. A series of sparse/coccinelle and checkpatch fixes on dwc3 by yours truly and a set of minor changes all over the stack. ---------------------------------------------------------------- Alan Stern (3): USB: UDC: Expand device model API interface USB: UDC: net2280: Fix memory leaks USB: UDC: net2272: Fix memory leaks Amelie Delaunay (3): dt-bindings: usb: dwc2: add optional usb-role-switch property usb: dwc2: override PHY input signals with usb role switch support usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCs Bryan O'Donoghue (1): USB: gadget: f_ncm: Fix NDP16 datagram validation Christian Lamparter (2): dt-bindings: usb: dwc2: add support for APM82181 SoCs USB OTG HS and FS usb: dwc2: add support for APM82181 USB OTG Christophe JAILLET (1): usb: gadget: tegra-xudc: Avoid GFP_ATOMIC where it is not needed Chunfeng Yun (1): usb: gadget: bcm63xx_udc: fix up the error of undeclared usb_debug_root Claudiu Beznea (1): usb: gadget: udc: atmel: use of_find_matching_node_and_match Colin Ian King (1): usb: gadget: fix spelling mistake "Dectected" -> "Detected" Cristian Birsan (5): dt-bindings: usb: atmel: Update DT bindings documentation for sam9x60 usb: gadget: udc: atmel: simplify endpoint allocation usb: gadget: udc: atmel: use 1 bank endpoints for control transfers usb: gadget: udc: atmel: update endpoint allocation for sam9x60 ARM: dts: at91: sam9x60ek: enable usb device Felipe Balbi (11): usb: dwc3: meson: fix coccinelle WARNING usb: dwc3: debug: fix sparse warning usb: dwc3: meson: fix checkpatch errors and warnings usb: dwc3: ulpi: fix checkpatch warning usb: dwc3: trace: fix checkpatch warnings usb: dwc3: debug: fix checkpatch warning usb: dwc3: ep0: fix checkpatch warnings usb: dwc3: qcom: fix checkpatch warnings usb: dwc3: debugfs: fix checkpatch warnings usb: dwc3: core: fix checkpatch warnings usb: dwc3: gadget: fix checkpatch warnings Florian Fainelli (1): MAINTAINERS: Add entry for Broadcom BDC driver Krzysztof Kozlowski (1): usb: gadget: s3c: Remove unused 'udc' variable Lad Prabhakar (1): dt-bindings: usb: renesas,usb-xhci: Document r8a774e1 support Li Jun (4): usb: dwc3: core: do not queue work if dr_mode is not USB_DR_MODE_OTG usb: dwc3: core: don't trigger runtime pm when remove driver usb: dwc3: core: add phy cleanup for probe error handling usb: dwc3: debugfs: do not queue work if try to change mode on non-drd Linus Walleij (2): usb: gadget: udc: Drop surplus include usb: gadget: pch_udc: Convert to use GPIO descriptors Lorenzo Colitti (4): usb: gadget: f_ncm: fix ncm_bitrate for SuperSpeed and above. usb: gadget: f_ncm: set SuperSpeed bulk descriptor bMaxBurst to 15 usb: gadget: f_ncm: allow using NCM in SuperSpeed Plus gadgets. usb: gadget: u_ether: enable qmult on SuperSpeed Plus as well Marc Zyngier (1): usb: dwc2: Always disable regulators on driver teardown Martin Blumenstingl (1): usb: dwc2: Add missing cleanups when usb_add_gadget_udc() fails Mauro Carvalho Chehab (2): usb: dwc3: simple: add support for Hikey 970 dt-bindings: document a new quirk for dwc3 Michał Mirosław (1): usb: gadget: f_acm: don't disable disabled EP Minas Harutyunyan (1): usb: dwc2: Fix INTR OUT transfers in DDMA mode. Nathan Chancellor (1): usb: dwc2: Fix parameter type in function pointer prototype Neil Armstrong (2): dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: add the Amlogic AXG Families USB Glue Bindings usb: dwc-meson-g12a: Add support for USB on AXG SoCs Pawel Laszczak (2): usb: cdns3: Enable workaround for USB2.0 PHY Rx compliance test PHY lockup usb: gadget: config_ep_by_speed_and_alt instead of config_ep_by_speed Peter Chen (22): usb: cdns3: gadget: free interrupt after gadget has deleted MAINTAINERS: add Cadence USB3 DRD IP driver entry usb: cdns3: introduce set_phy_power_on{off} APIs usb: cdns3: add runtime PM support usb: cdns3: imx: add glue layer runtime pm implementation usb: cdns3: core: quit if it uses role switch class usb: cdns3: gadget: set fast access bit usb: cdns3: gadget: clear the interrupt status when disconnect the host usb: cdns3: drd: call PHY .set_mode accordingly usb: cdns3: gadget: move wait configuration operation usb: cdns3: gadget: fix some endian issues usb: cdns3: gadget: fix possible memory leak usb: dwc3: allocate gadget structure dynamically Revert "usb: udc: allow adding and removing the same gadget device" usb: gadget: core: do not try to disconnect gadget if it is not connected usb: cdns3: gadget: using correct sg operations usb: cdns3: gadget: improve the dump TRB operation at cdns3_ep_run_transfer usb: cdns3: gadget: add CHAIN and ISP bit for sg list use case usb: cdns3: gadget: handle sg list use case at completion correctly usb: cdns3: gadget: need to handle sg case for workaround 2 case usb: cdns3: gadget: sg_support is only for DEV_VER_V2 or above usb: cdns3: gadget: enlarge the TRB ring length Qinglang Miao (1): usb: gadget: lpc32xx_udc: Convert to DEFINE_SHOW_ATTRIBUTE Randy Dunlap (1): usb: phy: phy-ab8500-usb: fix spello of "function" Raymond Tan (1): usb: dwc3: pci: Allow Elkhart Lake to utilize DSM method for PM functionality Roger Quadros (2): dt-bindings: usb: Convert cdns-usb3.txt to YAML schema dt-bindings: usb: cdns,usb3: Add cdns,phyrst-a-enable property Sandeep Maheswaram (1): usb: dwc3: qcom: Add interconnect support in dwc3 driver Tang Bin (2): usb: bdc: Fix unused assignment in bdc_probe() usb: bdc: remove duplicated error message Tao Ren (1): usb: gadget: aspeed: fixup vhub port irq handling Thierry Reding (3): usb: gadget: tegra-xudc: Use consistent spelling and formatting usb: gadget: tegra-xudc: Properly align parameters usb: gadget: tegra-xudc: Do not print errors on probe deferral Thinh Nguyen (21): usb: dwc3: gadget: Resume pending requests after CLEAR_STALL usb: dwc3: gadget: END_TRANSFER before CLEAR_STALL command usb: dwc3: core: Properly default unspecified speed usb: dwc3: core: Print warning on unsupported speed usb: dwc3: gadget: Refactor ep command completion usb: dwc3: gadget: Check MPS of the request length usb: dwc3: gadget: Reclaim extra TRBs after request completion usb: dwc3: gadget: Refactor preparing extra TRB usb: dwc3: gadget: Improve TRB ZLP setup usb: dwc3: ep0: Fix ZLP for OUT ep0 requests usb: dwc3: gadget: Return the number of prepared TRBs usb: dwc3: gadget: Check for number of TRBs prepared usb: dwc3: gadget: Set IOC if not enough for extra TRBs usb: dwc3: gadget: Refactor preparing last TRBs usb: dwc3: gadget: Rename misleading function names usb: dwc3: gadget: Allow restarting a transfer usb: dwc3: gadget: Look ahead when setting IOC usb: dwc3: gadget: Revise setting IOC when no TRB left usb: dwc3: gadget: Keep TRBs in request order usb: dwc3: gadget: Return early if no TRB update usb: dwc3: gadget: Support up to max stream id Wan Ahmad Zainie (2): dt-bindings: usb: Add Intel Keem Bay USB controller bindings usb: dwc3: of-simple: Add compatible string for Intel Keem Bay platform Wesley Cheng (1): usb: dwc3: Stop active transfers before halting the controller Ye Bin (1): usb: gadget: fsl: Fix unsigned expression compared with zero in fsl_udc_probe Yoshihiro Shimoda (1): usb: gadget: u_serial: clear suspended flag when disconnecting Yu Chen (1): usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc YueHaibing (1): usb: mtu3: Remove unsused inline function is_first_entry Zqiang (2): usb: gadget: function: printer: fix use-after-free in __lock_acquire usb: gadget: uvc: Fix the wrong v4l2_device_unregister call .../bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml | 22 +- .../devicetree/bindings/usb/atmel-usb.txt | 1 + .../devicetree/bindings/usb/cdns,usb3.yaml | 96 ++++ .../devicetree/bindings/usb/cdns-usb3.txt | 45 -- Documentation/devicetree/bindings/usb/dwc2.yaml | 5 + Documentation/devicetree/bindings/usb/dwc3.txt | 3 + .../bindings/usb/intel,keembay-dwc3.yaml | 77 +++ .../devicetree/bindings/usb/renesas,usb-xhci.yaml | 1 + MAINTAINERS | 18 + arch/arm/boot/dts/at91-sam9x60ek.dts | 13 + arch/arm/boot/dts/sam9x60.dtsi | 14 + drivers/usb/cdns3/cdns3-imx.c | 191 ++++++- drivers/usb/cdns3/core.c | 202 +++++-- drivers/usb/cdns3/core.h | 17 + drivers/usb/cdns3/drd.c | 20 + drivers/usb/cdns3/drd.h | 5 +- drivers/usb/cdns3/ep0.c | 10 +- drivers/usb/cdns3/gadget.c | 276 ++++++---- drivers/usb/cdns3/gadget.h | 11 +- drivers/usb/cdns3/host.c | 7 + drivers/usb/dwc2/Kconfig | 1 + drivers/usb/dwc2/Makefile | 2 +- drivers/usb/dwc2/core.h | 9 + drivers/usb/dwc2/drd.c | 180 +++++++ drivers/usb/dwc2/gadget.c | 42 +- drivers/usb/dwc2/params.c | 5 +- drivers/usb/dwc2/platform.c | 43 +- drivers/usb/dwc3/core.c | 90 +++- drivers/usb/dwc3/core.h | 47 +- drivers/usb/dwc3/debug.h | 8 +- drivers/usb/dwc3/debugfs.c | 59 +- drivers/usb/dwc3/dwc3-meson-g12a.c | 41 +- drivers/usb/dwc3/dwc3-of-simple.c | 2 + drivers/usb/dwc3/dwc3-pci.c | 3 +- drivers/usb/dwc3/dwc3-qcom.c | 128 ++++- drivers/usb/dwc3/ep0.c | 61 ++- drivers/usb/dwc3/gadget.c | 593 ++++++++++++--------- drivers/usb/dwc3/gadget.h | 3 +- drivers/usb/dwc3/trace.h | 17 +- drivers/usb/dwc3/ulpi.c | 2 +- drivers/usb/gadget/function/f_acm.c | 8 +- drivers/usb/gadget/function/f_ncm.c | 40 +- drivers/usb/gadget/function/f_printer.c | 16 +- drivers/usb/gadget/function/f_tcm.c | 12 +- drivers/usb/gadget/function/f_uvc.c | 8 +- drivers/usb/gadget/function/u_ether.c | 2 +- drivers/usb/gadget/function/u_serial.c | 1 + drivers/usb/gadget/udc/aspeed-vhub/core.c | 10 +- drivers/usb/gadget/udc/aspeed-vhub/vhub.h | 3 + drivers/usb/gadget/udc/atmel_usba_udc.c | 68 ++- drivers/usb/gadget/udc/atmel_usba_udc.h | 3 +- drivers/usb/gadget/udc/bcm63xx_udc.c | 1 + drivers/usb/gadget/udc/bdc/bdc_core.c | 9 +- drivers/usb/gadget/udc/core.c | 82 ++- drivers/usb/gadget/udc/fsl_udc_core.c | 9 +- drivers/usb/gadget/udc/lpc32xx_udc.c | 17 +- drivers/usb/gadget/udc/net2272.c | 24 +- drivers/usb/gadget/udc/net2272.h | 1 + drivers/usb/gadget/udc/net2280.c | 11 +- drivers/usb/gadget/udc/net2280.h | 1 + drivers/usb/gadget/udc/pch_udc.c | 55 +- drivers/usb/gadget/udc/s3c2410_udc.c | 3 - drivers/usb/gadget/udc/tegra-xudc.c | 60 ++- drivers/usb/mtu3/mtu3.h | 6 - drivers/usb/phy/phy-ab8500-usb.c | 2 +- include/linux/usb/gadget.h | 27 +- 66 files changed, 2075 insertions(+), 774 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/cdns,usb3.yaml delete mode 100644 Documentation/devicetree/bindings/usb/cdns-usb3.txt create mode 100644 Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml create mode 100644 drivers/usb/dwc2/drd.c