@@ -2437,25 +2437,31 @@ static void dwc2_core_host_init(struct dwc2_hsotg *hsotg)
num_channels = hsotg->params.host_channels;
for (i = 0; i < num_channels; i++) {
hcchar = dwc2_readl(hsotg, HCCHAR(i));
- hcchar &= ~HCCHAR_CHENA;
- hcchar |= HCCHAR_CHDIS;
- hcchar &= ~HCCHAR_EPDIR;
- dwc2_writel(hsotg, hcchar, HCCHAR(i));
+ if (hcchar & HCCHAR_CHENA) {
+ hcchar &= ~HCCHAR_CHENA;
+ hcchar |= HCCHAR_CHDIS;
+ hcchar &= ~HCCHAR_EPDIR;
+ dwc2_writel(hsotg, hcchar, HCCHAR(i));
+ }
}
/* Halt all channels to put them into a known state */
for (i = 0; i < num_channels; i++) {
hcchar = dwc2_readl(hsotg, HCCHAR(i));
- hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
- hcchar &= ~HCCHAR_EPDIR;
- dwc2_writel(hsotg, hcchar, HCCHAR(i));
- dev_dbg(hsotg->dev, "%s: Halt channel %d\n",
- __func__, i);
-
- if (dwc2_hsotg_wait_bit_clear(hsotg, HCCHAR(i),
- HCCHAR_CHENA, 1000)) {
- dev_warn(hsotg->dev, "Unable to clear enable on channel %d\n",
- i);
+ if (hcchar & HCCHAR_CHENA) {
+ hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
+ hcchar &= ~HCCHAR_EPDIR;
+ dwc2_writel(hsotg, hcchar, HCCHAR(i));
+ dev_dbg(hsotg->dev, "%s: Halt channel %d\n",
+ __func__, i);
+
+ if (dwc2_hsotg_wait_bit_clear(hsotg, HCCHAR(i),
+ HCCHAR_CHENA,
+ 1000)) {
+ dev_warn(hsotg->dev,
+ "Unable to clear enable on channel %d\n",
+ i);
+ }
}
}
}
Channel disabling/halting should performed for enabled only channels to avoid warnings "Unable to clear enable on channel N" which seen if host works in Slave mode. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> --- drivers/usb/dwc2/hcd.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-)