===================================================================
@@ -1416,42 +1416,37 @@ static void mceusb_gen1_init(struct mceu
{
int ret;
struct device *dev = ir->dev;
- char *data;
-
- data = kzalloc(USB_CTRL_MSG_SZ, GFP_KERNEL);
- if (!data) {
- dev_err(dev, "%s: memory allocation failed!", __func__);
- return;
- }
+ char data[USB_CTRL_MSG_SZ];
/*
* This is a strange one. Windows issues a set address to the device
* on the receive control pipe and expect a certain value pair back
*/
- ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
- USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
- data, USB_CTRL_MSG_SZ, 3000);
+ ret = usb_control_msg_recv(ir->usbdev, 0, USB_REQ_SET_ADDRESS,
+ USB_DIR_IN | USB_TYPE_VENDOR,
+ 0, 0, data, USB_CTRL_MSG_SZ, 3000,
+ GFP_KERNEL);
dev_dbg(dev, "set address - ret = %d", ret);
dev_dbg(dev, "set address - data[0] = %d, data[1] = %d",
data[0], data[1]);
/* set feature: bit rate 38400 bps */
- ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
- USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
- 0xc04e, 0x0000, NULL, 0, 3000);
+ ret = usb_control_msg_send(ir->usbdev, 0,
+ USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
+ 0xc04e, 0x0000, NULL, 0, 3000, GFP_KERNEL);
dev_dbg(dev, "set feature - ret = %d", ret);
/* bRequest 4: set char length to 8 bits */
- ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
- 4, USB_TYPE_VENDOR,
- 0x0808, 0x0000, NULL, 0, 3000);
+ ret = usb_control_msg_send(ir->usbdev, 0,
+ 4, USB_TYPE_VENDOR,
+ 0x0808, 0x0000, NULL, 0, 3000, GFP_KERNEL);
dev_dbg(dev, "set char length - retB = %d", ret);
/* bRequest 2: set handshaking to use DTR/DSR */
- ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
- 2, USB_TYPE_VENDOR,
- 0x0000, 0x0100, NULL, 0, 3000);
+ ret = usb_control_msg_send(ir->usbdev, 0,
+ 2, USB_TYPE_VENDOR,
+ 0x0000, 0x0100, NULL, 0, 3000, GFP_KERNEL);
dev_dbg(dev, "set handshake - retC = %d", ret);
/* device resume */
@@ -1459,8 +1454,6 @@ static void mceusb_gen1_init(struct mceu
/* get hw/sw revision? */
mce_command_out(ir, GET_REVISION, sizeof(GET_REVISION));
-
- kfree(data);
}
static void mceusb_gen2_init(struct mceusb_dev *ir)
Automatic kernel fuzzing led to a WARN about invalid pipe direction in the mceusb driver: ------------[ cut here ]------------ usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40 WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410 usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c6556ad #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41 RSP: 0018:ffffc900032becf0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000 RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90 RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000 R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000 R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500 FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0 Call Trace: <TASK> usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153 mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline] mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807 The reason for the warning is clear enough; the driver sends an unusual read request on endpoint 0 but does not set the USB_DIR_IN bit in the bRequestType field. More importantly, the whole situation can be avoided and the driver simplified by converting it over to the relatively new usb_control_msg_recv() and usb_control_msg_send() routines. That's what this fix does. Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/CAB7eexLLApHJwZfMQ=X-PtRhw0BgO+5KcSMS05FNUYejJXqtSA@mail.gmail.com/ --- [as1986] drivers/media/rc/mceusb.c | 35 ++++++++++++++--------------------- 1 file changed, 14 insertions(+), 21 deletions(-)