diff mbox series

[v3,net-next,05/21] net: usb: aqc111: Introduce PHY access

Message ID a6ee711fa9359196d0ac1d1782d78fa1464bdd50.1542794577.git.igor.russkikh@aquantia.com (mailing list archive)
State Superseded
Headers show
Series Add support for Aquantia AQtion USB to 5/2.5GbE devices | expand

Commit Message

Igor Russkikh Nov. 21, 2018, 10:13 a.m. UTC 
From: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>

Add helpers to write 32bit values.
Implement PHY power up/down sequences.
AQC111, PHY is being controlled via vendor command interface.

Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
---
 drivers/net/usb/aqc111.c | 65 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/usb/aqc111.h | 33 ++++++++++++++++++++
 2 files changed, 98 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c
index 75849714abfa..e277209df616 100644
--- a/drivers/net/usb/aqc111.c
+++ b/drivers/net/usb/aqc111.c
@@ -137,14 +137,49 @@  static int aqc111_write16_cmd(struct usbnet *dev, u8 cmd, u16 value,
 	return aqc111_write_cmd(dev, cmd, value, index, sizeof(tmp), &tmp);
 }
 
+static int aqc111_write32_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
+				   u16 index, u32 *data)
+{
+	u32 tmp = *data;
+
+	cpu_to_le32s(&tmp);
+
+	return aqc111_write_cmd_nopm(dev, cmd, value, index, sizeof(tmp), &tmp);
+}
+
+static int aqc111_write32_cmd(struct usbnet *dev, u8 cmd, u16 value,
+			      u16 index, u32 *data)
+{
+	u32 tmp = *data;
+
+	cpu_to_le32s(&tmp);
+
+	return aqc111_write_cmd(dev, cmd, value, index, sizeof(tmp), &tmp);
+}
+
 static const struct net_device_ops aqc111_netdev_ops = {
 	.ndo_open		= usbnet_open,
 	.ndo_stop		= usbnet_stop,
 };
 
+static void aqc111_read_fw_version(struct usbnet *dev,
+				   struct aqc111_data *aqc111_data)
+{
+	aqc111_read_cmd(dev, AQ_ACCESS_MAC, AQ_FW_VER_MAJOR,
+			1, 1, &aqc111_data->fw_ver.major);
+	aqc111_read_cmd(dev, AQ_ACCESS_MAC, AQ_FW_VER_MINOR,
+			1, 1, &aqc111_data->fw_ver.minor);
+	aqc111_read_cmd(dev, AQ_ACCESS_MAC, AQ_FW_VER_REV,
+			1, 1, &aqc111_data->fw_ver.rev);
+
+	if (aqc111_data->fw_ver.major & 0x80)
+		aqc111_data->fw_ver.major &= ~0x80;
+}
+
 static int aqc111_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	struct usb_device *udev = interface_to_usbdev(intf);
+	struct aqc111_data *aqc111_data;
 	int ret;
 
 	/* Check if vendor configuration */
@@ -161,13 +196,23 @@  static int aqc111_bind(struct usbnet *dev, struct usb_interface *intf)
 		return ret;
 	}
 
+	aqc111_data = kzalloc(sizeof(*aqc111_data), GFP_KERNEL);
+	if (!aqc111_data)
+		return -ENOMEM;
+
+	/* store aqc111_data pointer in device data field */
+	dev->driver_priv = aqc111_data;
+
 	dev->net->netdev_ops = &aqc111_netdev_ops;
 
+	aqc111_read_fw_version(dev, aqc111_data);
+
 	return 0;
 }
 
 static void aqc111_unbind(struct usbnet *dev, struct usb_interface *intf)
 {
+	struct aqc111_data *aqc111_data = dev->driver_priv;
 	u16 reg16;
 
 	/* Force bz */
@@ -177,12 +222,26 @@  static void aqc111_unbind(struct usbnet *dev, struct usb_interface *intf)
 	reg16 = 0;
 	aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_PHYPWR_RSTCTL,
 				2, &reg16);
+
+	/* Power down ethernet PHY */
+	aqc111_data->phy_cfg |= AQ_LOW_POWER;
+	aqc111_data->phy_cfg &= ~AQ_PHY_POWER_EN;
+	aqc111_write32_cmd_nopm(dev, AQ_PHY_OPS, 0, 0,
+				&aqc111_data->phy_cfg);
+
+	kfree(aqc111_data);
 }
 
 static int aqc111_reset(struct usbnet *dev)
 {
+	struct aqc111_data *aqc111_data = dev->driver_priv;
 	u8 reg8 = 0;
 
+	/* Power up ethernet PHY */
+	aqc111_data->phy_cfg = AQ_PHY_POWER_EN;
+	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
+			   &aqc111_data->phy_cfg);
+
 	reg8 = 0xFF;
 	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BM_INT_MASK, 1, 1, &reg8);
 
@@ -200,6 +259,7 @@  static int aqc111_reset(struct usbnet *dev)
 
 static int aqc111_stop(struct usbnet *dev)
 {
+	struct aqc111_data *aqc111_data = dev->driver_priv;
 	u16 reg16 = 0;
 
 	aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
@@ -210,6 +270,11 @@  static int aqc111_stop(struct usbnet *dev)
 	reg16 = 0;
 	aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, &reg16);
 
+	/* Put PHY to low power*/
+	aqc111_data->phy_cfg |= AQ_LOW_POWER;
+	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
+			   &aqc111_data->phy_cfg);
+
 	return 0;
 }
 
diff --git a/drivers/net/usb/aqc111.h b/drivers/net/usb/aqc111.h
index a252ccd78559..a93d34af76b9 100644
--- a/drivers/net/usb/aqc111.h
+++ b/drivers/net/usb/aqc111.h
@@ -12,6 +12,7 @@ 
 
 #define AQ_ACCESS_MAC			0x01
 #define AQ_PHY_POWER			0x31
+#define AQ_PHY_OPS			0x61
 
 #define AQ_USB_PHY_SET_TIMEOUT		10000
 #define AQ_USB_SET_TIMEOUT		4000
@@ -102,6 +103,38 @@ 
 	#define SFR_BULK_OUT_FLUSH_EN		0x01
 	#define SFR_BULK_OUT_EFF_EN		0x02
 
+#define AQ_FW_VER_MAJOR			0xDA
+#define AQ_FW_VER_MINOR			0xDB
+#define AQ_FW_VER_REV			0xDC
+
+/*PHY_OPS**********************************************************************/
+
+#define AQ_ADV_100M	BIT(0)
+#define AQ_ADV_1G	BIT(1)
+#define AQ_ADV_2G5	BIT(2)
+#define AQ_ADV_5G	BIT(3)
+
+#define AQ_PAUSE	BIT(16)
+#define AQ_ASYM_PAUSE	BIT(17)
+#define AQ_LOW_POWER	BIT(18)
+#define AQ_PHY_POWER_EN	BIT(19)
+#define AQ_WOL		BIT(20)
+#define AQ_DOWNSHIFT	BIT(21)
+
+#define AQ_DSH_RETRIES_SHIFT	0x18
+#define AQ_DSH_RETRIES_MASK	0xF000000
+
+/******************************************************************************/
+
+struct aqc111_data {
+	struct {
+		u8 major;
+		u8 minor;
+		u8 rev;
+	} fw_ver;
+	u32 phy_cfg;
+};
+
 static struct {
 	unsigned char ctrl;
 	unsigned char timer_l;