diff mbox series

[v2,01/18] usb: xhci-mtk: remove or operator for setting schedule parameters

Message ID d287899e6beb2fc1bfb8900c75a872f628ecde55.1615170625.git.chunfeng.yun@mediatek.com (mailing list archive)
State Accepted
Commit f6e1ab32bf6843c592ac6e241f89caf90b132b76
Headers show
Series [v2,01/18] usb: xhci-mtk: remove or operator for setting schedule parameters | expand

Commit Message

Chunfeng Yun March 8, 2021, 2:51 a.m. UTC
Side effect may happen if use or operator to set schedule parameters
when the parameters are already set before. Set them directly due to
other bits are reserved.

Fixes: 54f6a8af3722 ("usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: no changes
---
 drivers/usb/host/xhci-mtk-sch.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index b45e5bf08997..5891f56c64da 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -643,7 +643,7 @@  int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
 		 */
 		if (usb_endpoint_xfer_int(&ep->desc)
 			|| usb_endpoint_xfer_isoc(&ep->desc))
-			ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(1));
+			ep_ctx->reserved[0] = cpu_to_le32(EP_BPKTS(1));
 
 		return 0;
 	}
@@ -730,10 +730,10 @@  int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 		list_move_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list);
 
 		ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
-		ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(sch_ep->pkts)
+		ep_ctx->reserved[0] = cpu_to_le32(EP_BPKTS(sch_ep->pkts)
 			| EP_BCSCOUNT(sch_ep->cs_count)
 			| EP_BBM(sch_ep->burst_mode));
-		ep_ctx->reserved[1] |= cpu_to_le32(EP_BOFFSET(sch_ep->offset)
+		ep_ctx->reserved[1] = cpu_to_le32(EP_BOFFSET(sch_ep->offset)
 			| EP_BREPEAT(sch_ep->repeat));
 
 		xhci_dbg(xhci, " PKTS:%x, CSCOUNT:%x, BM:%x, OFFSET:%x, REPEAT:%x\n",