@@ -16,6 +16,22 @@
#include <linux/usb/otg.h>
#include <linux/of_platform.h>
+static const char *const ep_type_names[] = {
+ [USB_ENDPOINT_XFER_CONTROL] = "ctrl",
+ [USB_ENDPOINT_XFER_ISOC] = "isoc",
+ [USB_ENDPOINT_XFER_BULK] = "bulk",
+ [USB_ENDPOINT_XFER_INT] = "intr",
+};
+
+const char *usb_ep_type_string(int ep_type)
+{
+ if (ep_type < 0 || ep_type >= ARRAY_SIZE(ep_type_names))
+ return "unknown";
+
+ return ep_type_names[ep_type];
+}
+EXPORT_SYMBOL_GPL(usb_ep_type_string);
+
const char *usb_otg_state_string(enum usb_otg_state state)
{
static const char *const names[] = {
@@ -1878,23 +1878,10 @@ void usb_hcd_flush_endpoint(struct usb_device *udev,
/* kick hcd */
unlink1(hcd, urb, -ESHUTDOWN);
dev_dbg (hcd->self.controller,
- "shutdown urb %pK ep%d%s%s\n",
+ "shutdown urb %pK ep%d%s-%s\n",
urb, usb_endpoint_num(&ep->desc),
is_in ? "in" : "out",
- ({ char *s;
-
- switch (usb_endpoint_type(&ep->desc)) {
- case USB_ENDPOINT_XFER_CONTROL:
- s = ""; break;
- case USB_ENDPOINT_XFER_BULK:
- s = "-bulk"; break;
- case USB_ENDPOINT_XFER_INT:
- s = "-intr"; break;
- default:
- s = "-iso"; break;
- };
- s;
- }));
+ usb_ep_type_string(usb_endpoint_type(&ep->desc)));
usb_put_urb (urb);
/* list contents may have changed */
@@ -593,10 +593,6 @@ static int ast_vhub_epn_disable(struct usb_ep* u_ep)
static int ast_vhub_epn_enable(struct usb_ep* u_ep,
const struct usb_endpoint_descriptor *desc)
{
- static const char *ep_type_string[] __maybe_unused = { "ctrl",
- "isoc",
- "bulk",
- "intr" };
struct ast_vhub_ep *ep = to_ast_ep(u_ep);
struct ast_vhub_dev *dev;
struct ast_vhub *vhub;
@@ -646,7 +642,7 @@ static int ast_vhub_epn_enable(struct usb_ep* u_ep,
ep->epn.wedged = false;
EPDBG(ep, "Enabling [%s] %s num %d maxpacket=%d\n",
- ep->epn.is_in ? "in" : "out", ep_type_string[type],
+ ep->epn.is_in ? "in" : "out", usb_ep_type_string(type),
usb_endpoint_num(desc), maxpacket);
/* Can we use DMA descriptor mode ? */
@@ -617,21 +617,7 @@ static int dummy_enable(struct usb_ep *_ep,
_ep->name,
desc->bEndpointAddress & 0x0f,
(desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
- ({ char *val;
- switch (usb_endpoint_type(desc)) {
- case USB_ENDPOINT_XFER_BULK:
- val = "bulk";
- break;
- case USB_ENDPOINT_XFER_ISOC:
- val = "iso";
- break;
- case USB_ENDPOINT_XFER_INT:
- val = "intr";
- break;
- default:
- val = "ctrl";
- break;
- } val; }),
+ usb_ep_type_string(usb_endpoint_type(desc)),
max, ep->stream_en ? "enabled" : "disabled");
/* at this point real hardware should be NAKing transfers
@@ -36,6 +36,14 @@
#include <linux/device.h>
#include <uapi/linux/usb/ch9.h>
+/**
+ * usb_ep_type_string() - Returns human readable-name of the endpoint type.
+ * @ep_type: The endpoint type to return human-readable name for. If it's not
+ * any of the types: USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT},
+ * usually got by usb_endpoint_type(), the string 'unknown' will be returned.
+ */
+extern const char *usb_ep_type_string(int ep_type);
+
/**
* usb_speed_string() - Returns human readable-name of the speed.
* @speed: The speed to return human-readable name for. If it's not
In some places, the code prints a human-readable USB endpoint transfer type (e.g. "bulk"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To make this scenario easier, here introduces usb_ep_type_string() function, which returns a human-readable name of provided endpoint type. It also changes a few places switch was used to use this new function. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- v2 changes: 1. keep type string consistent with type_show() used in endpoint.c v3 changes: 1. abandon changes that will break user/kernel apis --- drivers/usb/common/common.c | 16 ++++++++++++++++ drivers/usb/core/hcd.c | 17 ++--------------- drivers/usb/gadget/udc/aspeed-vhub/epn.c | 6 +----- drivers/usb/gadget/udc/dummy_hcd.c | 16 +--------------- include/linux/usb/ch9.h | 8 ++++++++ 5 files changed, 28 insertions(+), 35 deletions(-)