@@ -60,20 +60,14 @@ static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
unsigned char buf[10];
int ret;
- int i;
- for (i = 0; i <= PCF2127_REG_CTRL3; i++) {
- ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL1 + i,
- (unsigned int *)(buf + i));
- if (ret) {
- dev_err(dev, "%s: read error\n", __func__);
- return ret;
- }
- }
-
- ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_SC,
- (buf + PCF2127_REG_SC),
- ARRAY_SIZE(buf) - PCF2127_REG_SC);
+ /*
+ * Avoid reading CTRL2 register as it causes WD_VAL register
+ * value to reset to 0 which means watchdog is stopped.
+ */
+ ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL3,
+ (buf + PCF2127_REG_CTRL3),
+ ARRAY_SIZE(buf) - PCF2127_REG_CTRL3);
if (ret) {
dev_err(dev, "%s: read error\n", __func__);
return ret;
@@ -95,14 +89,12 @@ static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
}
dev_dbg(dev,
- "%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, "
- "sec=%02x, min=%02x, hr=%02x, "
+ "%s: raw data is cr3=%02x, sec=%02x, min=%02x, hr=%02x, "
"mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
- __func__,
- buf[0], buf[1], buf[2],
- buf[3], buf[4], buf[5],
- buf[6], buf[7], buf[8], buf[9]);
-
+ __func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC],
+ buf[PCF2127_REG_MN], buf[PCF2127_REG_HR],
+ buf[PCF2127_REG_DM], buf[PCF2127_REG_DW],
+ buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]);
tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
The previous fix listed bulk read of registers as root cause of accendential disabling of watchdog, since the watchdog counter register (WD_VAL) was zeroed. Fixes: 3769a375ab83 rtc: pcf2127: bulk read only date and time registers. Tested with the same PCF2127 chip as Sean reveled root cause of WD_VAL register value zeroing was caused by reading CTRL2 register which is one of the watchdog feature control registers. So the solution is to not read the first two control registers (CTRL1 and CTRL2) in pcf2127_rtc_read_time as they are not needed anyway. Size of local buf variable is kept to allow easy usage of register defines to improve readability of code. Debug trace line was updated after CTRL1 and CTRL2 are no longer read from the chip. Also replaced magic numbers in buf access with register defines. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> --- drivers/rtc/rtc-pcf2127.c | 32 ++++++++++++-------------------- 1 file changed, 12 insertions(+), 20 deletions(-)