mbox series

[v4,0/4] wcn36xx: Update firmware config to support wcn3680

Message ID 20200909153717.2905037-1-bryan.odonoghue@linaro.org (mailing list archive)
Headers show
Series wcn36xx: Update firmware config to support wcn3680 | expand

Message

Bryan O'Donoghue Sept. 9, 2020, 3:37 p.m. UTC 
This series is five in a set of seven to add support for wcn3680 at 802.11ac
data-rates.

This series is about providing a parameters to firmware to get us up onto
802.11ac data-rates finally.

Once the firmware config is provided to the chip and VHT parameters are
populated we are good to go in terms of the higher data-rate for the
wcn3680.

I get typical data-rates of:

[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-320.00 sec  4.93 GBytes   132 Mbits/sec  445     sender
[  5]   0.00-320.14 sec  4.93 GBytes   132 Mbits/sec          receiver

Downstream 3.10 prima is getting I'm told 180-200 Mbits/sec on the same
hardware so with time and effort there's certainly some performance gain to
be squeezed out of this silicon yet.

However as a first pass, I believe this is good enough and useful enough to
others to submit for upstream inclusion.

An interesting project and a medium term goal would be to have a unified
configuration for all three supported chipsets.

For now suggesting a separate firmware configuration to make sure the
existing lower-speed 802.11n and higher-speed 802.11ac chips don't step on
each other's toes vis-a-vis firmware parameters.

V4:
- No functional change.
  Sending out full set again using --base=ath-202009090652 to aid kernel
  test robot
- https://lore.kernel.org/linux-wireless/20200908182529.2870478-1-bryan.odonoghue@linaro.org/T/#t

V3:
No difference between V3 and V2 below
https://lore.kernel.org/linux-wireless/20200829034002.2167878-1-bryan.odonoghue@linaro.org/T/#t

V2:
- Sets the default data-rate for wcn3680 to MCS8
- Zapps a few firmware settings for power-saving
  Powersave configuration as a specific wcn3680 topic is WIP on my end
  and I think therefore better left out of an intiial submission.

V1:
https://lore.kernel.org/linux-wireless/87eensldhi.fsf@codeaurora.org/T/#t

Bryan O'Donoghue (4):
  wcn36xx: Extend HAL param config list
  wcn36xx: Define wcn3680 specific firmware parameters
  wcn36xx: Add ability to download wcn3680 specific firmware parameters
  wcn36xx: Latch VHT specific BSS parameters to firmware

 drivers/net/wireless/ath/wcn36xx/hal.h | 124 ++++++++++++++++++++++++-
 drivers/net/wireless/ath/wcn36xx/smd.c | 114 ++++++++++++++++++++++-
 2 files changed, 234 insertions(+), 4 deletions(-)


base-commit: 160b351d75cb50a0dd2abf9b63e1891935aa9e4a
prerequisite-patch-id: 9a4ac7faca179f6594c9b3a115ee69a2da540a69
prerequisite-patch-id: 183286f9c22d1aaa12f356651224e6b337ef1938
prerequisite-patch-id: af468d413daaf8d2aad195fcb43c6e66390d8468
prerequisite-patch-id: 1a7fb93ee5874d2d011409eaed0b4fd764666b9c
prerequisite-patch-id: 77cc008b21a650fa7a33c4acad2fb632b09634fd
prerequisite-patch-id: 988ae4802971d6895b03b2752122b2be42baf188
prerequisite-patch-id: a3ba2a1963e03e23e86c937cd4cfb649e1b819b2
prerequisite-patch-id: 8a1fe4f63bc80e9a8035aa52356da8c46eab8665
prerequisite-patch-id: d75c1a60d1ede373c1f3eb684bb15c853c88eedc
prerequisite-patch-id: 47145acae6e24e8e6580fca1dbddfbec24f7b50b
prerequisite-patch-id: 8c66bccb923be821cf109a3a0d3a1a028edb4930
prerequisite-patch-id: f078e5fdfe8c18936469bfb118a964db13ea729f
prerequisite-patch-id: 746f63cf58fa3bf62736435c81dba2558aba8e81
prerequisite-patch-id: 36a94e202cbdaee8e06f9a108b1c894bd1159e62
prerequisite-patch-id: 8a598e22a08b0ec233d0ec56eeb53673eb1b8feb
prerequisite-patch-id: b0eba574ddc35ecec2d0e39c0d3351d1b260420e
prerequisite-patch-id: 143a1019813b7e4974a67e9eea1f1d599c0fdfdf
prerequisite-patch-id: f66d9fe9eb731272b825c9430c15dca89d6c6129
prerequisite-patch-id: c8c2d2dd1452c357f73fc4c92e5b564d59a05562
prerequisite-patch-id: 273c13464a69354d32790ed7509472d9c2b11231
prerequisite-patch-id: adbde1c98b85a16a6500b4210d4f055b9493418c