| Message ID | 20211005135400.788058-1-Jerome.Pouiller@silabs.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | wfx: get out from the staging area | expand |
Jerome Pouiller <Jerome.Pouiller@silabs.com> writes: > From: Jérôme Pouiller <jerome.pouiller@silabs.com> > > Hello, > > I think the wfx driver is now mature enough to be accepted in the > drivers/net/wireless directory. > > The firmware is now a part of the linux-firmware repository since relase > 20210315[1]. It had taken a bit of time because I have worked with the legal > department to simplify the redistribution terms of the firmware. > > [1]: https://lore.kernel.org/linux-firmware/2833354.gXvVfaC4I7@pc-42/ > > > As requested by Kalle[2], I send one file per patch. At the end, all the > patches (or at least the patches 3 to 24) will be squashed (therefore, I > didn't bother to write real commit messages). > > [2]: https://lore.kernel.org/lkml/87ft6p2n0h.fsf@codeaurora.org/ > > Here is a diagram of the global architecture that may help to understand > the code: > > ,------------------------------------. > | mac80211 | > `------------------------------------' > ,------------+-----------+-----------. > | sta | | | > | scan | | | > | main | | | > +------------+ data_tx | | > | key | | data_rx | > | hif_tx_mib | queue | | > | hif_tx | | | > | hif_rx | | | > | hif_api_* | | | > +------------+-----------+-----------+--------. > | bh | fwio | > +------------------------------------+--------+ > | hwio | > +---------------------------------------------+ > | bus_sdio | > | bus_spi | > `---------------------------------------------' > ,---------------------------------------------. > | spi / sdio | > `---------------------------------------------' > > Roughly, I have sent the files from the bottom to the top. > > > v8: > - Change the way the DT is handled. The user can now specify the name of > the board (= chip + antenna) he use. It easier for board designers to > add new entries. I plan to send a PR to linux-firmware to include PDS > files of the developpement boards belong the firmware (I also plan to > relocate these file into wfx/ instead of silabs/). (Kalle, Pali) > - Prefix visible functions and structs with "wfx_". I mostly kept the > code under 80 columns. (Kalle, Pali, Greg) > - Remove support for force_ps_timeout for now. (Kalle) > - Fix licenses of Makefile, Kconfig and hif_api*.h. (Kalle) > - Do not mix and match endianess in struct hif_ind_startup. (Kalle) > - Remove magic values. (Kalle) > - Use IS_ALIGNED(). (BTW, PTR_IS_ALIGNED() does not exist?) (Kalle) > - I have also noticed that some headers files did not declare all the > struct they used. > > These issues remain (I hope they are not blockers): > - I have currently no ideas how to improve/simplify the parsing PDS file. > (Kalle) For the PDS file problem it would help if you could actually describe what the firmware requires/needs and then we can start from that. I had some questions about this in v7 but apparently you missed those.
Jerome Pouiller <Jerome.Pouiller@silabs.com> writes: > From: Jérôme Pouiller <jerome.pouiller@silabs.com> > > Hello, > > I think the wfx driver is now mature enough to be accepted in the > drivers/net/wireless directory. > > The firmware is now a part of the linux-firmware repository since relase > 20210315[1]. It had taken a bit of time because I have worked with the legal > department to simplify the redistribution terms of the firmware. > > [1]: https://lore.kernel.org/linux-firmware/2833354.gXvVfaC4I7@pc-42/ > > > As requested by Kalle[2], I send one file per patch. At the end, all the > patches (or at least the patches 3 to 24) will be squashed (therefore, I > didn't bother to write real commit messages). > > [2]: https://lore.kernel.org/lkml/87ft6p2n0h.fsf@codeaurora.org/ > > Here is a diagram of the global architecture that may help to understand > the code: > > ,------------------------------------. > | mac80211 | > `------------------------------------' > ,------------+-----------+-----------. > | sta | | | > | scan | | | > | main | | | > +------------+ data_tx | | > | key | | data_rx | > | hif_tx_mib | queue | | > | hif_tx | | | > | hif_rx | | | > | hif_api_* | | | > +------------+-----------+-----------+--------. > | bh | fwio | > +------------------------------------+--------+ > | hwio | > +---------------------------------------------+ > | bus_sdio | > | bus_spi | > `---------------------------------------------' > ,---------------------------------------------. > | spi / sdio | > `---------------------------------------------' > > Roughly, I have sent the files from the bottom to the top. > > > v8: > - Change the way the DT is handled. The user can now specify the name of > the board (= chip + antenna) he use. It easier for board designers to > add new entries. I plan to send a PR to linux-firmware to include PDS > files of the developpement boards belong the firmware (I also plan to > relocate these file into wfx/ instead of silabs/). (Kalle, Pali) > - Prefix visible functions and structs with "wfx_". I mostly kept the > code under 80 columns. (Kalle, Pali, Greg) > - Remove support for force_ps_timeout for now. (Kalle) > - Fix licenses of Makefile, Kconfig and hif_api*.h. (Kalle) > - Do not mix and match endianess in struct hif_ind_startup. (Kalle) > - Remove magic values. (Kalle) > - Use IS_ALIGNED(). (BTW, PTR_IS_ALIGNED() does not exist?) (Kalle) > - I have also noticed that some headers files did not declare all the > struct they used. > > These issues remain (I hope they are not blockers): > - I have currently no ideas how to improve/simplify the parsing PDS file. > (Kalle) > - We would like to relate the SDIO quirks into mmc/core/quirks.h, but the > API to do that does not yet exist. (Ulf, Pali) So is this a direct version from staging-next? If yes, what commit id did you use? Or do you have your own set of patches on top of staging-next?
On Tuesday 5 October 2021 16:20:19 CEST Kalle Valo wrote: > Jerome Pouiller <Jerome.Pouiller@silabs.com> writes: > > > From: Jérôme Pouiller <jerome.pouiller@silabs.com> [...] > > > > v8: > > - Change the way the DT is handled. The user can now specify the name of > > the board (= chip + antenna) he use. It easier for board designers to > > add new entries. I plan to send a PR to linux-firmware to include PDS > > files of the developpement boards belong the firmware (I also plan to > > relocate these file into wfx/ instead of silabs/). (Kalle, Pali) > > - Prefix visible functions and structs with "wfx_". I mostly kept the > > code under 80 columns. (Kalle, Pali, Greg) > > - Remove support for force_ps_timeout for now. (Kalle) > > - Fix licenses of Makefile, Kconfig and hif_api*.h. (Kalle) > > - Do not mix and match endianess in struct hif_ind_startup. (Kalle) > > - Remove magic values. (Kalle) > > - Use IS_ALIGNED(). (BTW, PTR_IS_ALIGNED() does not exist?) (Kalle) > > - I have also noticed that some headers files did not declare all the > > struct they used. > > > > These issues remain (I hope they are not blockers): > > - I have currently no ideas how to improve/simplify the parsing PDS file. > > (Kalle) > > - We would like to relate the SDIO quirks into mmc/core/quirks.h, but the > > API to do that does not yet exist. (Ulf, Pali) > > So is this a direct version from staging-next? If yes, what commit id did > you use? Or do you have your own set of patches on top of staging-next? I am based on 5e57c668dc09 from staging-next. (I have not rebased it between v7 and v8)
On Tuesday 5 October 2021 16:15:22 CEST Kalle Valo wrote: > Jerome Pouiller <Jerome.Pouiller@silabs.com> writes: > > > From: Jérôme Pouiller <jerome.pouiller@silabs.com> [...] > > v8: > > - Change the way the DT is handled. The user can now specify the name of > > the board (= chip + antenna) he use. It easier for board designers to > > add new entries. I plan to send a PR to linux-firmware to include PDS > > files of the developpement boards belong the firmware (I also plan to > > relocate these file into wfx/ instead of silabs/). (Kalle, Pali) > > - Prefix visible functions and structs with "wfx_". I mostly kept the > > code under 80 columns. (Kalle, Pali, Greg) > > - Remove support for force_ps_timeout for now. (Kalle) > > - Fix licenses of Makefile, Kconfig and hif_api*.h. (Kalle) > > - Do not mix and match endianess in struct hif_ind_startup. (Kalle) > > - Remove magic values. (Kalle) > > - Use IS_ALIGNED(). (BTW, PTR_IS_ALIGNED() does not exist?) (Kalle) > > - I have also noticed that some headers files did not declare all the > > struct they used. > > > > These issues remain (I hope they are not blockers): > > - I have currently no ideas how to improve/simplify the parsing PDS file. > > (Kalle) > > For the PDS file problem it would help if you could actually describe > what the firmware requires/needs and then we can start from that. I had > some questions about this in v7 but apparently you missed those. Did you received this reply[1]? [1]: https://lore.kernel.org/all/2723787.uDASXpoAWK@pc-42/
Jérôme Pouiller <jerome.pouiller@silabs.com> writes: > On Tuesday 5 October 2021 16:15:22 CEST Kalle Valo wrote: >> Jerome Pouiller <Jerome.Pouiller@silabs.com> writes: >> >> > From: Jérôme Pouiller <jerome.pouiller@silabs.com> > [...] >> > v8: >> > - Change the way the DT is handled. The user can now specify the name of >> > the board (= chip + antenna) he use. It easier for board designers to >> > add new entries. I plan to send a PR to linux-firmware to include PDS >> > files of the developpement boards belong the firmware (I also plan to >> > relocate these file into wfx/ instead of silabs/). (Kalle, Pali) >> > - Prefix visible functions and structs with "wfx_". I mostly kept the >> > code under 80 columns. (Kalle, Pali, Greg) >> > - Remove support for force_ps_timeout for now. (Kalle) >> > - Fix licenses of Makefile, Kconfig and hif_api*.h. (Kalle) >> > - Do not mix and match endianess in struct hif_ind_startup. (Kalle) >> > - Remove magic values. (Kalle) >> > - Use IS_ALIGNED(). (BTW, PTR_IS_ALIGNED() does not exist?) (Kalle) >> > - I have also noticed that some headers files did not declare all the >> > struct they used. >> > >> > These issues remain (I hope they are not blockers): >> > - I have currently no ideas how to improve/simplify the parsing PDS file. >> > (Kalle) >> >> For the PDS file problem it would help if you could actually describe >> what the firmware requires/needs and then we can start from that. I had >> some questions about this in v7 but apparently you missed those. > > Did you received this reply[1]? > > [1]: https://lore.kernel.org/all/2723787.uDASXpoAWK@pc-42/ I did and I even made further questions: https://lore.kernel.org/all/87k0ixj5vn.fsf@codeaurora.org/ Can we please continue the discussion on that thread instead of passing out lore links to each other :)
Jérôme Pouiller <jerome.pouiller@silabs.com> writes: > On Tuesday 5 October 2021 16:20:19 CEST Kalle Valo wrote: >> Jerome Pouiller <Jerome.Pouiller@silabs.com> writes: >> >> > From: Jérôme Pouiller <jerome.pouiller@silabs.com> > [...] >> > >> > v8: >> > - Change the way the DT is handled. The user can now specify the name of >> > the board (= chip + antenna) he use. It easier for board designers to >> > add new entries. I plan to send a PR to linux-firmware to include PDS >> > files of the developpement boards belong the firmware (I also plan to >> > relocate these file into wfx/ instead of silabs/). (Kalle, Pali) >> > - Prefix visible functions and structs with "wfx_". I mostly kept the >> > code under 80 columns. (Kalle, Pali, Greg) >> > - Remove support for force_ps_timeout for now. (Kalle) >> > - Fix licenses of Makefile, Kconfig and hif_api*.h. (Kalle) >> > - Do not mix and match endianess in struct hif_ind_startup. (Kalle) >> > - Remove magic values. (Kalle) >> > - Use IS_ALIGNED(). (BTW, PTR_IS_ALIGNED() does not exist?) (Kalle) >> > - I have also noticed that some headers files did not declare all the >> > struct they used. >> > >> > These issues remain (I hope they are not blockers): >> > - I have currently no ideas how to improve/simplify the parsing PDS file. >> > (Kalle) >> > - We would like to relate the SDIO quirks into mmc/core/quirks.h, but the >> > API to do that does not yet exist. (Ulf, Pali) >> >> So is this a direct version from staging-next? If yes, what commit id did >> you use? Or do you have your own set of patches on top of staging-next? > > I am based on 5e57c668dc09 from staging-next. (I have not rebased it between > v7 and v8) Commit 5e57c668dc09 is from Sep 14th, so I take it that you have your on patches on top of staging-next. But please don't send a new version of the patchset too often, at least try to keep two weeks between versions but preferably even more. It's quite difficult when you send a new version and there are still ongoing discussions in the previous version.
From: Jérôme Pouiller <jerome.pouiller@silabs.com> Hello, I think the wfx driver is now mature enough to be accepted in the drivers/net/wireless directory. The firmware is now a part of the linux-firmware repository since relase 20210315[1]. It had taken a bit of time because I have worked with the legal department to simplify the redistribution terms of the firmware. [1]: https://lore.kernel.org/linux-firmware/2833354.gXvVfaC4I7@pc-42/ As requested by Kalle[2], I send one file per patch. At the end, all the patches (or at least the patches 3 to 24) will be squashed (therefore, I didn't bother to write real commit messages). [2]: https://lore.kernel.org/lkml/87ft6p2n0h.fsf@codeaurora.org/ Here is a diagram of the global architecture that may help to understand the code: ,------------------------------------. | mac80211 | `------------------------------------' ,------------+-----------+-----------. | sta | | | | scan | | | | main | | | +------------+ data_tx | | | key | | data_rx | | hif_tx_mib | queue | | | hif_tx | | | | hif_rx | | | | hif_api_* | | | +------------+-----------+-----------+--------. | bh | fwio | +------------------------------------+--------+ | hwio | +---------------------------------------------+ | bus_sdio | | bus_spi | `---------------------------------------------' ,---------------------------------------------. | spi / sdio | `---------------------------------------------' Roughly, I have sent the files from the bottom to the top. v8: - Change the way the DT is handled. The user can now specify the name of the board (= chip + antenna) he use. It easier for board designers to add new entries. I plan to send a PR to linux-firmware to include PDS files of the developpement boards belong the firmware (I also plan to relocate these file into wfx/ instead of silabs/). (Kalle, Pali) - Prefix visible functions and structs with "wfx_". I mostly kept the code under 80 columns. (Kalle, Pali, Greg) - Remove support for force_ps_timeout for now. (Kalle) - Fix licenses of Makefile, Kconfig and hif_api*.h. (Kalle) - Do not mix and match endianess in struct hif_ind_startup. (Kalle) - Remove magic values. (Kalle) - Use IS_ALIGNED(). (BTW, PTR_IS_ALIGNED() does not exist?) (Kalle) - I have also noticed that some headers files did not declare all the struct they used. These issues remain (I hope they are not blockers): - I have currently no ideas how to improve/simplify the parsing PDS file. (Kalle) - We would like to relate the SDIO quirks into mmc/core/quirks.h, but the API to do that does not yet exist. (Ulf, Pali) v7: - Update location of mmc-pwrseq-simple.txt (Rob) v6: - Rebase on last staging-next (roughtly somewhere after the 5.15 merge window). So, this series include the patches from: https://lore.kernel.org/netdev/20210913130203.1903622-1-Jerome.Pouiller@silabs.com/ v5: - Add reference to the PR to linux-firmware in the cover letter - Rebase on last staging tree (that mainly include commit 6efed0a69794 "staging: wfx: fix possible panic with re-queued frames" and a few cosmetics changes) - Remove useless trailing spaces in DT binding (Rob) - Add a commit message in the patch 2 since I am not sure it will be squashed with the other (Rob) v4: - Rebase on last staging tree - Add 'additionalProperties: false' to the DT specification (I made that change blindly because I am able to reproduce Rob's error) (Rob) - Replace C++ comments with Ansi C comments (Kalle) - Check that existing Ansi C comments comply with net/ "compact" style - Drop one obsolete comment - Remove comments after '#endif' in header files - Remove macro redefinitions in hif_api_general.h (Kalle) - Replace compiletime_assert() with BUILD_BUG_ON_MSG() (Kalle) - Rename ieee80211_is_action_back() (Kalle) - Add a comment explaining how the PDS is sent to the device (Kalle) - Add a comment about case where CONFIG_MMC==m in the Makefile (Kalle) - Fix irrevelant comment about CONFIG_VMAP_STACK (Kalle) - Talk about the unreliable SDIO Vendor ID in the Kconfig help (Kalle) - Mention the firmware status in the cover letter (Kalle) - Fix misaligned function arguments in key.c v3: - dt-bindings: Rename config-file property (Rob) - dt-bindings: No additional properties are allowed (spi-max-frequency is already listed) (Rob) - dt-bindings: Remove references for mac-address properties (Rob) - Rebase on staging/staging-next v2: - dt-bindings: Improve device description and add link to the datasheet (Rob) - dt-bindings: Add blank lines between each DT property (Rob) - dt-bindings: Explicitly mention mac-address and local-mac-address and add references to ethernet-controller.yaml (Rob) - dt-bindings: "config-file" is not for development/debug (Rob) - dt-bindings: Remove description of "spi-max-frequency" (Rob) - dt-bindings: Use "folded scalar" syntax instead of escaping the colons - bus_sdio.c: A compatible node in the DT is now mandatory to probe the device. Also change documentation of dt-bindings accordingly (Pali, Ulf) - bus_sdio.c: Move SDIO IDs to sdio_ids.h (Pali) - bh.c: Import patch "staging: wfx: fix test on return value of gpiod_get_value()" (Nathan) - data_tx.c: Import patch "staging: wfx: fix use of uninitialized pointer" - sta.c: Import patch "staging: wfx: make a const array static, makes object smaller" (Colin) v1: - Drop the function name in the warning message (Kalle) - Replace goto by return in wfx_send_pdata_pds() (Kalle, Dan) - Improve error label in wfx_send_pdata_pds() (Kalle) Jérôme Pouiller (24): mmc: sdio: add SDIO IDs for Silabs WF200 chip dt-bindings: introduce silabs,wfx.yaml wfx: add Makefile/Kconfig wfx: add wfx.h wfx: add main.c/main.h wfx: add bus.h wfx: add bus_spi.c wfx: add bus_sdio.c wfx: add hwio.c/hwio.h wfx: add fwio.c/fwio.h wfx: add bh.c/bh.h wfx: add hif_api_*.h wfx: add hif_tx*.c/hif_tx*.h wfx: add key.c/key.h wfx: add hif_rx.c/hif_rx.h wfx: add data_rx.c/data_rx.h wfx: add queue.c/queue.h wfx: add data_tx.c/data_tx.h wfx: add sta.c/sta.h wfx: add scan.c/scan.h wfx: add debug.c/debug.h wfx: add traces.h wfx: remove from the staging area wfx: get out from the staging area .../bindings/net/wireless/silabs,wfx.yaml | 64 ++-- MAINTAINERS | 3 +- drivers/net/wireless/Kconfig | 1 + drivers/net/wireless/Makefile | 1 + drivers/net/wireless/silabs/Kconfig | 18 + drivers/net/wireless/silabs/Makefile | 3 + .../wireless/silabs}/wfx/Kconfig | 5 + .../wireless/silabs}/wfx/Makefile | 3 +- .../{staging => net/wireless/silabs}/wfx/bh.c | 31 +- .../{staging => net/wireless/silabs}/wfx/bh.h | 1 + .../wireless/silabs}/wfx/bus.h | 2 +- .../wireless/silabs}/wfx/bus_sdio.c | 91 +++-- .../wireless/silabs}/wfx/bus_spi.c | 68 +++- .../wireless/silabs}/wfx/data_rx.c | 2 +- .../wireless/silabs}/wfx/data_rx.h | 4 +- .../wireless/silabs}/wfx/data_tx.c | 86 ++--- .../wireless/silabs}/wfx/data_tx.h | 14 +- .../wireless/silabs}/wfx/debug.c | 41 +-- .../wireless/silabs}/wfx/debug.h | 6 +- .../wireless/silabs}/wfx/fwio.c | 78 ++-- .../wireless/silabs}/wfx/fwio.h | 0 .../wireless/silabs}/wfx/hif_api_cmd.h | 144 ++++---- .../wireless/silabs}/wfx/hif_api_general.h | 60 ++-- .../wireless/silabs}/wfx/hif_api_mib.h | 68 ++-- .../wireless/silabs}/wfx/hif_rx.c | 142 ++++---- .../wireless/silabs}/wfx/hif_rx.h | 0 .../wireless/silabs}/wfx/hif_tx.c | 152 ++++---- drivers/net/wireless/silabs/wfx/hif_tx.h | 64 ++++ drivers/net/wireless/silabs/wfx/hif_tx_mib.c | 333 ++++++++++++++++++ drivers/net/wireless/silabs/wfx/hif_tx_mib.h | 55 +++ .../wireless/silabs}/wfx/hwio.c | 156 ++++---- .../wireless/silabs}/wfx/hwio.h | 36 +- .../wireless/silabs}/wfx/key.c | 24 +- .../wireless/silabs}/wfx/key.h | 0 .../wireless/silabs}/wfx/main.c | 58 ++- .../wireless/silabs}/wfx/main.h | 5 +- .../wireless/silabs}/wfx/queue.c | 22 +- .../wireless/silabs}/wfx/queue.h | 2 +- .../wireless/silabs}/wfx/scan.c | 19 +- .../wireless/silabs}/wfx/scan.h | 0 .../wireless/silabs}/wfx/sta.c | 111 +++--- .../wireless/silabs}/wfx/sta.h | 0 .../wireless/silabs}/wfx/traces.h | 10 +- .../wireless/silabs}/wfx/wfx.h | 13 +- drivers/staging/Kconfig | 1 - drivers/staging/Makefile | 1 - drivers/staging/wfx/TODO | 6 - drivers/staging/wfx/hif_tx.h | 60 ---- drivers/staging/wfx/hif_tx_mib.c | 324 ----------------- drivers/staging/wfx/hif_tx_mib.h | 49 --- include/linux/mmc/sdio_ids.h | 7 + 51 files changed, 1262 insertions(+), 1182 deletions(-) rename {drivers/staging/wfx/Documentation => Documentation}/devicetree/bindings/net/wireless/silabs,wfx.yaml (68%) create mode 100644 drivers/net/wireless/silabs/Kconfig create mode 100644 drivers/net/wireless/silabs/Makefile rename drivers/{staging => net/wireless/silabs}/wfx/Kconfig (60%) rename drivers/{staging => net/wireless/silabs}/wfx/Makefile (76%) rename drivers/{staging => net/wireless/silabs}/wfx/bh.c (90%) rename drivers/{staging => net/wireless/silabs}/wfx/bh.h (96%) rename drivers/{staging => net/wireless/silabs}/wfx/bus.h (97%) rename drivers/{staging => net/wireless/silabs}/wfx/bus_sdio.c (73%) rename drivers/{staging => net/wireless/silabs}/wfx/bus_spi.c (77%) rename drivers/{staging => net/wireless/silabs}/wfx/data_rx.c (97%) rename drivers/{staging => net/wireless/silabs}/wfx/data_rx.h (77%) rename drivers/{staging => net/wireless/silabs}/wfx/data_tx.c (87%) rename drivers/{staging => net/wireless/silabs}/wfx/data_tx.h (76%) rename drivers/{staging => net/wireless/silabs}/wfx/debug.c (89%) rename drivers/{staging => net/wireless/silabs}/wfx/debug.h (65%) rename drivers/{staging => net/wireless/silabs}/wfx/fwio.c (83%) rename drivers/{staging => net/wireless/silabs}/wfx/fwio.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_api_cmd.h (81%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_api_general.h (88%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_api_mib.h (86%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_rx.c (69%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_rx.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_tx.c (72%) create mode 100644 drivers/net/wireless/silabs/wfx/hif_tx.h create mode 100644 drivers/net/wireless/silabs/wfx/hif_tx_mib.c create mode 100644 drivers/net/wireless/silabs/wfx/hif_tx_mib.h rename drivers/{staging => net/wireless/silabs}/wfx/hwio.c (51%) rename drivers/{staging => net/wireless/silabs}/wfx/hwio.h (62%) rename drivers/{staging => net/wireless/silabs}/wfx/key.c (90%) rename drivers/{staging => net/wireless/silabs}/wfx/key.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/main.c (93%) rename drivers/{staging => net/wireless/silabs}/wfx/main.h (92%) rename drivers/{staging => net/wireless/silabs}/wfx/queue.c (95%) rename drivers/{staging => net/wireless/silabs}/wfx/queue.h (95%) rename drivers/{staging => net/wireless/silabs}/wfx/scan.c (88%) rename drivers/{staging => net/wireless/silabs}/wfx/scan.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/sta.c (88%) rename drivers/{staging => net/wireless/silabs}/wfx/sta.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/traces.h (97%) rename drivers/{staging => net/wireless/silabs}/wfx/wfx.h (93%) delete mode 100644 drivers/staging/wfx/TODO delete mode 100644 drivers/staging/wfx/hif_tx.h delete mode 100644 drivers/staging/wfx/hif_tx_mib.c delete mode 100644 drivers/staging/wfx/hif_tx_mib.h