mbox series

[V8,0/9] wifi: ath12k: add MU-MIMO and 160 MHz bandwidth support

Message ID 20240918212056.4137076-1-quic_pradeepc@quicinc.com (mailing list archive)
Headers show
Series wifi: ath12k: add MU-MIMO and 160 MHz bandwidth support | expand

Message

Pradeep Kumar Chitrapu Sept. 18, 2024, 9:20 p.m. UTC
Add support for
1. enabling MU-MIMO in HE and EHT modes from hardware
2. setting fixed HE rate/GI/LTF
3. 160 MHz bandwidth in HE mode
4. extended NSS bandwidth support

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

changes in v8:
 - rebase and resolve KASAN warnings reported by Jeff in v7, in patch 6/9.

changes in v7:
 - rebase and remove patch 01/10 which was merged already.

changes in v6:
 - Change comment in patch 01/10 to represent only AP mode
   implementation.

changes in v5:
 - Fix column length to 80 in patch 01/10
 - Fix advertises spelling in patch 09/10
 - Fix choosing spelling in patch 10/10

changes in v4:
 - Fix ath12k-check warnings in patch 2/10 and 7/10
 - remove "hostapd" reference in patches 2/10 and 3/10
 - remove redundant prerequisite-patch-id's in cover letter

changes in v3:
 - address review comments for fixing ath12k-check issues.

changes in v2:
 - Amend mac80211 patch description as the patch is not specific
   to AP mode.
 - Amend EHT MU-MIMO patch description to specify future support
   for STA mode.

Pradeep Kumar Chitrapu (9):
  wifi: ath12k: push HE MU-MIMO params to hardware
  wifi: ath12k: push EHT MU-MIMO params to hardware
  wifi: ath12k: move HE MCS mapper to a separate function
  wifi: ath12k: generate rx and tx mcs maps for supported HE mcs
  wifi: ath12k: fix TX and RX MCS rate configurations in HE mode
  wifi: ath12k: add support for setting fixed HE rate/GI/LTF
  wifi: ath12k: clean up 80P80 support
  wifi: ath12k: add support for 160 MHz bandwidth
  wifi: ath12k: add extended NSS bandwidth support for 160 MHz

 drivers/net/wireless/ath/ath12k/core.h |    2 +
 drivers/net/wireless/ath/ath12k/mac.c  | 1052 ++++++++++++++++++++----
 drivers/net/wireless/ath/ath12k/mac.h  |   17 +
 drivers/net/wireless/ath/ath12k/wmi.c  |   24 +-
 drivers/net/wireless/ath/ath12k/wmi.h  |   98 ++-
 5 files changed, 985 insertions(+), 208 deletions(-)


base-commit: 92de67902177c2ea65000a87a6b24fed17d48a18

Comments

Jeff Johnson Sept. 30, 2024, 9:21 p.m. UTC | #1
On 9/18/2024 2:20 PM, Pradeep Kumar Chitrapu wrote:
> Add support for
> 1. enabling MU-MIMO in HE and EHT modes from hardware
> 2. setting fixed HE rate/GI/LTF
> 3. 160 MHz bandwidth in HE mode
> 4. extended NSS bandwidth support
> 
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
> 
> changes in v8:
>  - rebase and resolve KASAN warnings reported by Jeff in v7, in patch 6/9.
> 
> changes in v7:
>  - rebase and remove patch 01/10 which was merged already.
> 
> changes in v6:
>  - Change comment in patch 01/10 to represent only AP mode
>    implementation.
> 
> changes in v5:
>  - Fix column length to 80 in patch 01/10
>  - Fix advertises spelling in patch 09/10
>  - Fix choosing spelling in patch 10/10
> 
> changes in v4:
>  - Fix ath12k-check warnings in patch 2/10 and 7/10
>  - remove "hostapd" reference in patches 2/10 and 3/10
>  - remove redundant prerequisite-patch-id's in cover letter
> 
> changes in v3:
>  - address review comments for fixing ath12k-check issues.
> 
> changes in v2:
>  - Amend mac80211 patch description as the patch is not specific
>    to AP mode.
>  - Amend EHT MU-MIMO patch description to specify future support
>    for STA mode.
> 
> Pradeep Kumar Chitrapu (9):
>   wifi: ath12k: push HE MU-MIMO params to hardware
>   wifi: ath12k: push EHT MU-MIMO params to hardware
>   wifi: ath12k: move HE MCS mapper to a separate function
>   wifi: ath12k: generate rx and tx mcs maps for supported HE mcs
>   wifi: ath12k: fix TX and RX MCS rate configurations in HE mode
>   wifi: ath12k: add support for setting fixed HE rate/GI/LTF
>   wifi: ath12k: clean up 80P80 support
>   wifi: ath12k: add support for 160 MHz bandwidth
>   wifi: ath12k: add extended NSS bandwidth support for 160 MHz
> 
>  drivers/net/wireless/ath/ath12k/core.h |    2 +
>  drivers/net/wireless/ath/ath12k/mac.c  | 1052 ++++++++++++++++++++----
>  drivers/net/wireless/ath/ath12k/mac.h  |   17 +
>  drivers/net/wireless/ath/ath12k/wmi.c  |   24 +-
>  drivers/net/wireless/ath/ath12k/wmi.h  |   98 ++-
>  5 files changed, 985 insertions(+), 208 deletions(-)
> 
> 
> base-commit: 92de67902177c2ea65000a87a6b24fed17d48a18

Although this series applies cleanly to ath/main, it does not apply cleanly to
ath/ath12k-mlo. So dropping this until ath12k-mlo is mainlined so that your
series can be rebased on that.