mbox series

[ath-next,v4,0/3] wifi: ath12k: Enable REO queue lookup table on QCN9274

Message ID 20250402152529.1649402-1-quic_nithp@quicinc.com (mailing list archive)
Headers show
Series wifi: ath12k: Enable REO queue lookup table on QCN9274 | expand

Message

Nithyanantham Paramasivam April 2, 2025, 3:25 p.m. UTC 
Instead of storing the REO queue address inside peer entries, REO
hardware module prefers them to be stored in SRAM which could be
directly accessed by REO using peer_ID/TID based Lookup table(LUT)
mechanism. This feature is expected to improve stability by reduced
interaction between host and firmware during both MLO and non-MLO
operations.This feature is enabled only for the QCN9274, so it does
not impact the WCN7850.

v4:
- Rebased on TOT

v3:
- Rebased on TOT
- Fixed 32bit compilation warning

v2:
- Removed junk version histories in cover letter

Balamurugan S (1):
  wifi: ath12k: Add support to clear qdesc array in REO cache

Nithyanantham Paramasivam (1):
  wifi: ath12k: Enable REO queue lookup table feature on QCN9274

Sriram R (1):
  wifi: ath12k: Fix the enabling of REO queue lookup table feature

 drivers/net/wireless/ath/ath12k/dp.c     | 77 ++++++++++++++++--------
 drivers/net/wireless/ath/ath12k/dp.h     |  5 +-
 drivers/net/wireless/ath/ath12k/dp_rx.c  | 11 +++-
 drivers/net/wireless/ath/ath12k/hal.h    |  7 +++
 drivers/net/wireless/ath/ath12k/hal_rx.c | 19 +++++-
 drivers/net/wireless/ath/ath12k/hw.c     |  4 +-
 drivers/net/wireless/ath/ath12k/hw.h     |  3 +
 drivers/net/wireless/ath/ath12k/wmi.c    |  8 ++-
 drivers/net/wireless/ath/ath12k/wmi.h    |  1 +
 9 files changed, 104 insertions(+), 31 deletions(-)


base-commit: ba613742db305037ca2193b2b552b769c4f2a5f7

Comments

Jeff Johnson April 3, 2025, 6:52 p.m. UTC | #1 
On Wed, 02 Apr 2025 20:55:26 +0530, Nithyanantham Paramasivam wrote:
> Instead of storing the REO queue address inside peer entries, REO
> hardware module prefers them to be stored in SRAM which could be
> directly accessed by REO using peer_ID/TID based Lookup table(LUT)
> mechanism. This feature is expected to improve stability by reduced
> interaction between host and firmware during both MLO and non-MLO
> operations.This feature is enabled only for the QCN9274, so it does
> not impact the WCN7850.
> 
> [...]

Applied, thanks!

[1/3] wifi: ath12k: Fix the enabling of REO queue lookup table feature
      commit: 0bbcd42b15fa730f393a01bc818802d9f0b04197
[2/3] wifi: ath12k: Add support to clear qdesc array in REO cache
      commit: 30b03edd265a79b779c29c12ad640c91830ce7ca
[3/3] wifi: ath12k: Enable REO queue lookup table feature on QCN9274
      commit: 89ac53e96217bd5525ee56eaa1b8ef2b398a9ad6

Best regards,